JeruSelam Mecânica - Auto

Transfer Cases

A transfer case is a part of a four-wheel drive system found in four-wheel drive and all-wheel drive vehicles. The transfer case receives power from the transmission and sends it to both the front and rear axles. This can be done with a set of gears, but the majority of transfer cases manufactured today are chain driven. The transfer case is connected to the transmission and also to the front and rear axles by means of drive shafts. Trust the automotive experts at JS Auto Center for all your transmission repairs.

Manual Transmission

Driving a vehicle with a Manual Transmission requires using the clutch pedal and gear shift to manually shift gears based on the speed of the vehicle. Manual transmissions have been built with anywhere from two to eight gears. Front-wheel drive and rear-wheel drive are the two main configurations for manual transmissions. Typically, manual transmissions require less maintenance than automatic transmissions.

Front-Wheel Drive Transmission

If your vehicle has Front-wheel drive, the engine drives the front wheels only. The power is routed through the transmission to the final drive where it is split and sent to the two front wheels through the drive axles. The engine, transmission, and additional hardware is all located in the front of the car. If you are in need,

Four-Wheel Drive Transmission

A four-wheel (4×4) drive vehicle has differential gears, both front and rear axles, and a transfer case attached to the transmission. Four-wheel drive vehicles demand maintenance on the transfer case, front differentials, rear differentials, and transmission fluids. Visit us JeruSelam Mecânica Auto for service on your four-wheel drive

Engine Controls

Basically, an engine control system is an onboard computer in your car. Like all computers, the engine controls are composed of hardware and software. Automotive engine control systems are responsible for regulating exhaust emissions, and providing increased fuel economy. To get the best out of your car’s incredibly powerful technology, make sure engine controls are working properly. To check if your car’s engine controls are working properly, call JS Auto Center today

Automatic Transmission

Automatic Transmissions shift between gears automatically to optimize driving, and change gears based on the driver’s throttle pedal, vehicle speed, engine speed, and vehicle load. Typical automatic transmissions have 4-5 forward gear ratios, a Reverse, Park, and Neutral gear. Shifting gears occur automatically once the car is in Drive and there is no need for a clutch pedal or gear shift like there is in a Manual Transmission. Automatic transmission repair is complicated based on all the components that make it up, and you need to have any automatic transmission issues properly assessed by auto mechanics.

Clutches

There are clutches in both automatic and manual transmission cars, and different types of clutches. When shifting gears, the clutch engages and disengages from the flywheel and transfers the torque through the transmission. Clutches should help your vehicle start and shift gears smoothly. The clutch in your car receives a lot of wear and can eventually wear out. If your clutch begins slipping irregularly or is making noises that are raising suspicion, contact JS Auto Center to see if clutch replacement is necessary.

Drivability

Drivability is the degree of smoothness and steadiness of your car’s acceleration. Most modern cars are fitted with onboard computers that continuously check the readings from various sensors. In case of drivability problems, you will receive a warning message on your car’s dashboard. To have your car diagnosed with drivability issues, visit JeruSelam Mecânica- Auto today. At JS Auto Center, we have the necessary tools, training, and technology to diagnose and address your car’s drivability issues

Computer

Today, car manufacturers include at least one computer in motor vehicles. This computer’s main function is to monitor and adjust engine and transmission operations. The computer receives input information from different sensors. The computer controls spark plugs, idle speed, and fuel injectors so as to get you the best possible car performance. Failure of the car computer will greatly affect the things it controls. To get the most out of your car’s computer, have it evaluated regularly for updates and proper operation. If it is already failing, have it repaired or replaced.

Diagnostics

Mechanics at JS Auto Center are able to diagnose all the electronic parts in your car. For expert diagnostics services on your car’s electronic devices, visit JS Auto Center today.

Fuel Injection

Fuel injection is a system for admitting fuel into an engine. Since 1990, fuel injectors have completely replaced carburetors as the primary means of getting gasoline into the engine. A fuel injector atomizes the fuel by forcibly pumping it through a small nozzle (under high pressure). Failure of the fuel injection system means poor performance and ultimately destroys the engine. Make sure your vehicle’s fuel injection system is maintained properly. For all your fuel injection maintenance and replacement needs.

Ignition

An ignition system is a system for igniting (using an electric spark) a mixture of fuel and air in a gasoline engine. A properly working ignition system means a properly starting engine and high performance from your car. For all your ignition system maintenance and replacement needs.

Clutches

There are clutches in both automatic and manual transmission cars, and different types of clutches. When shifting gears, the clutch engages and disengages from the flywheel and transfers the torque through the transmission. Clutches should help your vehicle start and shift gears smoothly. The clutch in your car receives a lot of wear and can eventually wear out. If your clutch begins slipping irregularly or is making noises that are raising suspicion, contact JeruSelam Mecânica - Auto to see if clutch replacement is necessary. Read more about HEAVY DUTY SERVICES: ENGINE OVERHAUL & REPLACEMENT by visiting here.

7. Car Stalling

Many vehicles come equipped with fail-safe features to prevent the engine from severe damage. One of them is that the engine stalls and dies when there’s low engine oil pressure or the oil level drops.

That said, engine stalling itself is pretty taxing on the motor. It could damage the pistons and other components, which can be expensive to repair or replace.

So, if your vehicle keeps stalling, it’s time to check for low engine oil pressure or low oil level.

Now you know what signs to look for to confirm a low oil level.

6. Poor Fuel Economy

Without sufficient oil flow, your engine must work harder to meet the vehicle’s demands. And the harder the engine works, the more fuel it will burn.

This can affect your fuel economy, which means you’ll be stopping by the gas pump more often.

So if you notice a drop in your vehicle’s fuel efficiency, get your car inspected for low engine oil as well.

5. Sluggish Vehicle Performance

Did you know that low engine oil can also impact your car’s efficiency?

Since the engine oil maintains lubrication for smooth functioning, the lack of it can cause your engine to go into overdrive. This not only results in sluggish engine performance and reduced efficiency, but can lead to severe damage that would require expensive engine repairs.

4. Engine Overheating

Another common low engine oil symptom is engine overheating.

While the cooling system (coolant, radiator, water pump, etc.) is responsible for keeping your vehicle parts cool, engine oil also helps keep areas cool where the coolant can’t reach.

Without sufficient oil pressure, your engine will work with decreased lubrication. The lack of lubrication causes friction between metal parts and can also cause them to heat up. As a result, your vehicle may shut itself off to prevent engine damage, or the heated components could start a fire, which can be pretty dangerous.

So, if the temperature gauge rises to unsafe levels, it indicates that your engine is overheating. Pull over right away and call roadside assistance.

Important: Don’t try to open the hood immediately, as hot coolant can explode out of the reservoir and can cause severe burns. Allow the engine to cool off to check the coolant and engine oil level, and top them off as required.

3. Knocking or Clunking Noises

Sounds of any kind coming from under the hood are never a good sign.

If you hear a knocking or clunking noise from your engine components, chances are you’re running low on engine oil.

Why does that happen?

When your car engine doesn’t have enough oil flow, its parts can rub together and create friction. This can loosen engine rods, a critical engine part responsible for tightly securing the pistons. Without lubrication, these rods will be thrown around inside the engine, creating the knocking sound.

You may also hear lifters or cam bearing noise due to low oil pressure, low oil level, or if the oil has lost its oil viscosity.

Note: Oil viscosity refers to how easily the oil flows at a specific temperature.

Regardless, your powertrain can seize and break down completely if the issue isn’t addressed. It’s best to schedule an engine service or get an oil change when you notice this symptom.

2. Burning Oil Smell

If your vehicle starts giving off a burning oil smell, pull over immediately.

A burning oil smell from your vehicle and subsequent low oil level could indicate an oil leak from one of the engine components. This oil may drip on a hot engine part, causing that burning smell.

Once you pull over, let your vehicle cool down. Then, check the dipstick for a low oil level. If it’s low, don’t drive, as low oil can lead to severe engine damage. Either refill the engine oil or call for auto assistance.

1. Illuminated Oil Pressure Warning Light

An illuminated oil pressure light is the most definitive way to tell you that you have low engine oil.

Most modern vehicles have a warning light (oil light) connected to a system of sensors that evaluate the oil pressure and report it to the ECU (Engine Control Unit). If your car lacks sufficient oil pressure, the ECU triggers the warning light you can see on your dashboard.

If you see this oil warning light, get your vehicle inspected ASAP for low oil pressure or get a motor oil top-up, if required.

Note: If your oil warning light only flickers instead of staying steadily lit, you should still get your oil pressure and oil level checked. But, if the oil light doesn’t go off even after an oil top-up, the low oil pressure could be due to a faulty oil pressure sensor, oil pump, or oil pressure gauge, amongst other things.

7 Low Engine Oil Symptoms

1. Illuminated Oil Pressure Warning Light

2. Burning Oil Smell

3. Knocking or Clunking Noises

4. Engine Overheating

5. Sluggish Vehicle Performance

6. Poor Fuel Economy

7. Car Stalling

Oil Changes

Did you know that regularly changing the oil in your vehicle is one of the simplest, most effective, and inexpensive ways to help protect its engine life? Oil lessens wear, reduces friction, and forms a seal between the pistons, rings, and cylinder walls. The oil also helps cool engine parts and even dampens the shock and noise of moving parts. For all your oil change needs, visit JeruSelam Mecânica - Auto Center today. We have years of experience helping drivers with oil changes and other auto maintenance needs.

Differential Flush

The differential is a car part that compensates for the difference in travel distance between the inner wheels and outer wheels when the vehicle is turning. Due to the differential’s position in most non-four-wheel-drive (FWD) vehicles (located at the rear and under the car), it does not get any of the star treatment the engine gets. The one thing that every car owner needs to know is that failure of the differential will mean failure of the car. To save the differential from failure, you need to have differential fluid changed every 30,000 to 50,000 miles. Changing the oil on the differential is as important as changing the car’s engine oil. Although checking and changing differential oil is pretty easy, you need to visit an auto shop to get a comprehensive differential flush. For differential flush services

Power Steering Flush

Power steering fluid is the hydraulic fluid that transmits the power in a steering wheel. Servicing the power steering involves flushing out the old power steering fluid and adding fresh fluid. A power steering flush will definitely help prolong the life of the power steering components. Failure to have periodic power steering flushes results in important parts like the power steering pump, the seals, the power steering rack, and the O-rings wearing out. To have a comprehensive power steering flush,

Radiator Flush

A radiator is the part of your vehicle that keeps the engine cool and protects it from excessive heating. To be cool, the radiator needs to remain clean – always. With time, sludge, rust, and other solid deposits build up inside your car’s radiator. These make the cooling system become clogged and less effective. This in effect hurts your vehicle’s performance. A regular radiator flush is enough to keep the system in shape. For this reason, make radiator flushing a part of your routine car maintenance schedule. For all your radiator flush needs,

Transmission Flush & Filter

Transmission flush and filter change is a comprehensive transmission maintenance service that involves the replacement of old, degraded transmission fluid and filters with new. The service is meant to prolong the life of your transmission. At JeruSelam Mecânica - Auto Center, we offer the most comprehensive transmission flush and filter service. We will exchange your old transmission oil, remove dirt, replace the filter, clean the screen, and replace used pans.

Your wish is our polish.

We live for the art of cleanliness.

Coolant System Flush

A car’s air conditioning system contains a coolant that transfers excess heat from one part of the engine and finally loses it through the radiator fins. With time, the a/c coolant becomes old and dirty. The old coolant will negatively impact the system’s performance. To make sure the system is working effectively, consider having a regular coolant system flush. A coolant flush is a basic maintenance for your car’s cooling system. Ensure maximum performance from your vehicle’s heating and cooling systems today.

Transmission Service

Just like replacing your engine oil, transmission service is part of your routine vehicle maintenance. The service involves removing and examining the pan, cleaning or replacing the screen or filter, cleaning the pan, reinstalling the pan (with a new pan gasket), replacing the old oil with new, and adding an additive package. Adding new fluid restores the holding power between the clutches. This service helps improve lubrication and helps maximize the life of the transmission. For all your transmission repair needs,.