All Plant Mechanical

Service on this new Hako road sweeper

New engine for this greens roller.. only one left in Australia I believe being a 2:1 reduction 👍

Engine out just to do a carby clean on an old WACA roller 😂👍

Servicing your machinery is important, but that includes the fun machines too 😉👍

Service on a little Iseki tractor in York .. waiting on some parts to replace water pump and hoses.. 👍

Service day finally.. I say finally because I’ve “finally” found some time to do it 😉👍

Turns out you can heat up 15mm plate with a Hot Devil and bend it. That’s a Win when you don’t have oxy/acetylene 👍

Vertidrain repairs

Quick service on a little mini ex… U25 Kubota

Small fabrication job for a customer.. drag mat carrier used during renovation of the greens and tees… not really my thing but came up alright.. I was going to weld some plates at the ends to stop any sideways movement but they were cut off before I had a chance.. probably for the best as they did stick out a little far 😂👍

Hey engineers, I think I can still get oil in the breather to fill this gearbox… oh wait, nope, now there’s an air blockage.. 🤦‍♂️

Winning 💪

Out with the old and in with the new..

Don’t let your cutting decks get dangerous, check for material thickness and damage when carrying out your prestarts. Foreign objects could come flying out of holes that have worn through…

Safety first 👍

Getting around again this week… Some of the little jobs I had this week…
Back on the Cat D5 dozer for a top rad hose..
Toro workman carby clean and tune..
And a heap of stihl garden care products with numerous issues.. Hustler zero turn with transmission leaks.. and a good old Gianni Ferrari replacing the foot board… 😉👍

——Don’t forget to check over your cooling system in your plant Machinery before it starts getting hot, clean your radiators with compressed air, check and or replace your coolant if it hasn’t been done in a while, check all your hoses, fan and belts 👍——

Getting around some of Perths great golf courses…

Some intermittent faults on the big Toro 4700 all sorted.. and a water pump and bearings in the reels on the Toro 3100… too easy 👍

Love working outside..

Playing with the big boys today..
service and repairs..
6000psi 300mm long hydraulic hose.. make sure you’ve got deep pockets.. my word 😳

That’s a great Friday right there.. not just one but 2.. 💪

Couple of big ones today, servicing and a few minor repairs..

The octopus of turf equipment

Oh no.. the beer cart went down 😳
Thankfully I wasn’t too far away and was an easy fix 😉👍

Just a little bit of sand..
trying to find the end of a leaking hydraulic hose

Small welding job on a customers trailer.. Yes I can carry minor repairs to your trailers, lights, wheel bearings etc 👍

When is the best time to change your air filters. Before this happens I think 😳

Rebuilding the impeller and housing. And a new deck wear plate on the turbo 1 Gianni..
not a small job without a hoist 👍

Up in Toodyay today for a couple of services on a Hitachi excavator and Husqvarna zero turn. Mower parts proudly sourced through Farm and turf equipment. For all your farming and turf equipment needs 👍.

Couple of services on a Saturday morning at Cottesloe golf club in the new Ute..

1000hours between servicing will cause your filter to block.. funny that 🤦‍♂️
Never in 29years as a mechanic have I seen this. Inside of filter is complete dry and it weighed about twice as much as a new one.
Please keep up with regular interval servicing on your machinery or major engine failure will occur.

Quick back lap to keep the edge between cylinder grinds 👍

Please have your mowers checked on a regular basis. Safety switches are there for a reason 👍

‘Death trap’ mowers: Call for action after foot partly amputated A Gold Coast man whose foot was partly amputated after he was run over by his own ride-on lawnmower is calling for a national recall of the machine, saying they’re “death traps”.

Rebuild day… always remember when checking engine oil and you find it’s not on the dipstick, top it up 😉 👍