Admiral Pumps

Our client placed a callout for a sewer inspection due to a high level alarm being heard by residents. After attending and inspecting found the sewer waste pit to be just that full and with no access to any pipe work unions our only choice was to get the pit pumped out to allow further inspection. Sucker truck attended and pumped out the pit. We were then able to see a failed joint on the systems pipe work. System manifold was then modified to allow access to unions from external of the pit for future servicability Dual isolation vavles added for compliance, client now has a fully functional and serviceable sewer system.

Believed to be 6 years passing with no form of maintenance, found a waste water system that had failed on several aspects. The pumps were down to earth, the tank had failed and cracked, the pumps had been running dry over time an unknown period of time, as the floats were found laying on the bottom of the tank. First things first to get them up and running with new pumps untill the tank works can be carried out.

Rear bearing failure had one sea breezed pump just screaming for some love, Replaced with new, the disconntinued pump had different centre heights so some base customisation work was required. The pumps discharge fl**ge had a pin hole leak in it, we removed the fl**ge and cleaned it up, welded the fl**ge to repair the leak, reinstall then epoxy painted the fl**ge to provide futher resistance to the sea breazed future it will endevour.

After quite some time we are now marking our first Social media post.

Out with the old, In with the new. Top it off with a full manual clean of the pit to remove all the sludge and forien objects from the stormwater pit. 😍