Climasure
Adelaide's premier energy efficient building supplies experts
**NCC 2022 Hot Tip**
One major change in NCC 2022 not related to 7 stars is slab edge and under slab insulation - read more below!
*If you are building in climate zones 6,7 or 8 you will need to install slab edge and under slab insulation to every project (check you are using the correct R value in slide 4)
*If you install in slab heating in conditioned spaces, you are still required to insulate the slab edge, regardless of climate
Sources: yourhome.gov.au, NCC2022 Housing Provisions, abcb.gov.au
It's not "building science". It's just building.
If you're interested in starting your journey towards knowledge of a higher standard of construction I recommend you attend the One Day Introduction to Passivhaus. The link to register can be accessed via our bio.
July 23rd
9am-5pm
Waymouth Street, Adelaide.
In person.
Architects will receive 7 CPD points for this course.
Free 12 month APA membership for all attendees
Let me know if you sign up!
Posted • International Passivhaus Open Days!
This is your chance SA to visit us and Jess from as she demonstrates a blower door test!
Anyone wanted to see one up close but never had the chance?
Oh and also have a look at our amazing Certified Passive House! 😊
Link in comments
When one of the supervisors crashes the Ute, it's Extora tape to the rescue!!
-purpose
If your insulation install doesn't look like this, they're doing it wrong. No gaps. No scrunching. No missing bits.
The Adelaide leg of the Pro Clima roadshow to launch The Australia Study done.
The room was full of architects, builders and home owners all wanting to know more about building more air tight, higher performing buildings without creating inadvertent health issues as that is one of the challenges we face as an industry.
The code requirements are increasing, NCC 2022 takes a fairly giant leap forward for homes and we know that as tightness and insulation increase, so does condensation risk. Let's understand why and what to do about it.
Thanks ,
Neil Cox and Ryan Worthington!
Great to see our fellow South aussie cohort at the Passivhaus Conference last week! Many informative presentations were made, we're so lucky to have such an invested professional industry who are so willing to share and learn together!
Thank you and Stalin and Sam for your hard work getting the conference off the ground for another year.
Ace Panel Systems
Who will be attending the Pro Clima national tour to launch the Australian Study?
"The study lays out innovative and practical solutions that allow us to achieve healthy, durable, and energy-efficient buildings in Australia. Many companies in the construction industry are already implementing these principles using locally available products and supply chains. We already have the knowledge, evidence, and capabilities in our industry, so join us as we continue to revolutionise and change the industry for the better."
Perth / Hobart / Adelaide / Brisbane / Sydney Canberra / Melbourne!
For my Adelaide peeps - our event will be held on the 30th May, 4-7pm at The Pullman Adelaide.
Register here: https://proclimaaustralia.arlo.co/w/events/65-australian-study-launch/209
Hope to see you there!
When it comes to residential energy efficiency building practices in Australia, two prominent rating schemes, stand at the forefront — Nationwide House Energy Rating Scheme (NatHERS) and the Passivhaus Standard.
Read more - Link in bio
Cladding or roofing delays? Want to start building in winter but are worried about all the rain?
The Pro Clima Australia systems will keep your structure dry for up to 180 days. This means you are better equipped to cope with the unexpected delays and inconveniences that inevitably happen during construction!
Head to the Climasure website to find out more about the Pro Clima products
www.climasure.com.au/shop
It's come to our attention that yet another big builder in SA is wrapping their brand new timber framed homes in a class 1 vapour barrier in climate zone 6.
This is not compliant with the current building code.
If you are building in the Adelaide Hills or down south in Victor Harbor / Kangaroo Island - it's highly likely you are in climate zone 6 so please confirm with your builder that they are using a class 3 or 4 vapour permeable membrane to protect your building.
If they are using a class 1 or 2 vapour barrier, they are trapping moisture inside your wall frame which can lead to mould - which can have a serious effect on health of the building and health of the occupants.
Under NCC2022 the rules get even tighter around condensation and mould management - watch this space for more information on this!
Architects and builders of Adelaide - don't miss this!!
Calling all architects and builders! Elevate your expertise with our specialised presentations tailored just for you! Dive deep into crucial topics such as mould prevention, condensation management, Passivhaus standards, and mastering air tightness. Each session is curated to your needs to empower you with the knowledge needed to excel in your craft. Let's build smarter, healthier spaces together. Reach out to us at Climasure via our DMs to book your personalised presentation either online or at your office if you're local here in Adelaide. Atelier Bond
These presentations are free. The education is priceless.
We look forward to talking with you!
"
Air tightness is the underpinning element of an energy efficient home and windows are one of the worst offenders for unintended air leakage.
Make sure you seal behind your architraves with Wurth expanding foam to prevent your expensive conditioned air from escaping and the air from outside getting in!
Head to our online shop to order your Wurth foam www.climasure.com.au/shop
Meeting with Luke and Hannah from today to discuss a couple of their upcoming projects and how to 1. Optimise energy efficiency and durability and 2. Educate the architect who hasn't prioritised thermal comfort as the client requested! Great to chat with them and to work with builders who are leading the way.
Head to our online shop to grab the foam to seal up your windows too!
1-component gun foam for a variety of applications. Small can, high yield
Up to 40 litres of foam from an easy-to-use and handy can.
Suitable for use in winter. Can also be applied at base material and ambient temperatures down to -5°C
*****
Joint sound insulation: Reduces noise level (RST,w = 61 dB in accordance with DIN 52210)
Thermal conductivity: Reduces heat loss in accordance with DIN 52612
Air permeability: Prevents draughts, tested in accordance with EN 1026
Water vapour permeability: Tested in accordance with DIN EN ISO 12572.
Energy saving according to German Energy Saving Ordinance (EnEV): Heating cost savings of 6 %, based on DIN 18055/EN 204
General test certificate from construction authorities: Complies with building material class B2 in accordance with DIN 4102, Part 1
www.climasure.com.au/shop
A stellar group of builders, carpenters, architects, consultants, home owners and more joined us at Climausure and on newest soon-to-be-certified Passive House site for some training on building science and installation of the Pro Clima system for best practice outcomes.
It fills us with pride to see the ever growing numbers of Adelaide builders showing an interest in building better buildings for their clients. They tell us their clients are asking more questions aboutenergy efficiency and building science than ever. NCC 2022 is just around the corner. We love bringing the education that helps to propel the industry upward.
We are officially bursting at the seams for these two events with the waitlist growing every day - please make sure you let us know if you are no longer able to attend so no one misses out!
Please DM us to cancel your booking if needed!
We are officially BOOKED OUT for our two upcoming training sessions with Air Boss Dan and still a week to go! Please pop your name on our waiting list if you'd still like to attend as we may add a third session if demand warrants it.
The level of building science knowledge and quality of construction in Adelaide is about to get boosted!
WAITING LIST REGISTRATIONS ONLY
Thursday 15th Feb, 2pm - https://events.humanitix.com/pro-clima-installation-training-with-air-boss-dan-hosted-by-climasure
Friday 16th Feb, 9am - https://events.humanitix.com/16th-feb-9am-pro-clima-installation-training-with-air-boss-dan-adelaide-hosted-by-climasure
***Passivhaus mid build blower door test day***
When your client NAILS IT!!! Congratulations Alan .passivehouse on your incredible mid-build blower door test result. You can now proceed with the rest of your project knowing that the scariest bit is under control. Great work!
Calling all architects and builders in Adelaide!!
You have a unique opportunity to learn from the best! Daniel Jakobs, aka Airboss Dan from Pro Clima Australia will be in Adelaide in two weeks time to run installation training for the German engineered Pro Clima tape and membrane system. If you are interested in building better buildings for your clients or want to learn about mould and condensation risk management so you don't end up in a legal battle down the track (NCC 2022 is coming to SA in October!) then register now!
We're hosting these events at Adelaide's next Passive House, currently being built by Enduro Builders so don't miss this amazing opportunity to get involved.
Interested home owners are also welcome!
Thursday 15th Feb, 2pm - https://events.humanitix.com/pro-clima-installation-training-with-air-boss-dan-hosted-by-climasure
Friday 16th Feb, 9am - https://events.humanitix.com/16th-feb-9am-pro-clima-installation-training-with-air-boss-dan-adelaide-hosted-by-climasure
Good, bad or ugly - we want to know what you think of Climasure. We value honest and constructive feedback so please head to the link below and leave us a Google review!
https://g.page/r/CZp-BZ_dWJCKEBM/review
Happy 2024!
We're kicking off the year with our first blog post - "How does WUFI work?"
Can't believe we haven't done one yet on WUFI! Enquiries for this service are kicking up and it's becoming clear that there's some confusion over how it works so here's some info to clarify. Please get in touch if you have questions!
https://www.climasure.com.au/building-science/how-does-wufi-work/
2023 has been a pleasure! Looking forward to more better buildings and education of industry in 2024! #2023
Wishing all of our clients and customers and very Merry Christmas and Happy New Year! We look forward to working with you again in 2024.
Ever wondered how the Pro Clima Australia membranes get taped into windows? Here's showing us how it's done. Check out his YouTube channel and Instagram for more instructional videos!
https://www.youtube.com/watch?v=c5M3dc9HzX8
Australian builder. Current projects.
Image 1 - during construction
Image 2 - 2 months over handover.
This is what we don't want to see in brand new houses and after hundreds of thousands of dollars spent. This is not peace of mind. This is stress, cost and potential asthma and eczema and other mould related illnesses. We can help you avoid it. Head to our website for more info.
Link in bio.
The Pro Clima membrane system might seem complex when you first hear about it, but it's really not. It's just a matter of knowing how. Everything is easy when you know how right! This little mock up wall we have in our office shows the following products in action:
1. Solitex Extasana (external wall)
2. Intello Plus (internal wall intelligent vapour barrier)
3. Tescon Extora flashing tape
4. Tescon Vana air tight sealing tape
4. Extoseal sill tape
Our online store is always open and we are always available for a chat if you have any questions. Head to our website for more information.
www.climasure.com.au
Videos (show all)
Contact the business
Website
Opening Hours
Monday | 09:00 - 17:00 |
Tuesday | 09:00 - 17:00 |
Wednesday | 09:00 - 17:00 |
Thursday | 09:00 - 17:00 |
Friday | 09:00 - 17:00 |