Gizmo Machine Tools Inc.

Pre-owned DAEWOO PUMA 300LC TURNING CENTER.
Equipped with
Controller FANUC Series 21i-TB
15 " Chuck
Tailstock
Chip Conveyor
Toolsetter
Coolant Tank
For specs and more, visit us at :
https://www.gizmo-mt.ca/listings/6051798-used-daewoo-puma-300lc-turning-center

Pre-owned LAGUN MILLING MACHINE FTV-2S

Equipped with:
DRO (Heidenhan)
Power Feed in Longitudinal Axis (X-Axis)

For specs and more, visit us at: https://www.gizmo-mt.ca/listings/4625262-used-lagun-milling-machine

Pre-owned LAGUN MILLING MACHINE FTV-1S

Equipped with:
DRO (Mitutoyo)
Power Feed in Longitudinal Axis (X-Axis)

For specs and more, visit us at: https://www.gizmo-mt.ca/listings/4625215-used-lagun-milling-machine

Milling Machine

Pre-owned KIWA KNH-426X HORIZONTAL MACHINING CENTER

Equipped with:Fanuc 18i-MB CNC Control, ATC Magazine 120, High Pressure Thru-Spindle Coolant, Spindle Chiller, Chip Blaster, Chip Conveyor, Coolant System.

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/5223951-used-kiwa-knh-426x-horizontal-machining-center

Pre-owned KIWA KH-45G HORIZONTAL MACHINING CENTER.
Equipped with:
Controller : Fanuc 31i-MODEL A , 80 ATC Magazine, Spindle Chiller, High-Pressure Thru-Spindle Coolant, Chip Conveyor, Coolant System

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/5223866-used-kiwa-kh-45g-horizontal-machining-center

Machining Centers

Pre-owned:2019 ENSHU GE 480H HMC 20K RPM, HSK63A (VERY LOW HOURS)

Equipped with:
Fanuc Series 31i Model B
Coolant thru-spindle
Full Rotary Bi-Directional B Axis
FANUC 74 HP Spindle Drive
Rotary automatic pallet changer
Chip Blaster
1200mm high, rear discharge rolling filter chip conveyor with magnetic separator
High-volume rolling filter chip conveyor.
Linear Guides (Cross roller)
Through spindle coolant 100 psi
Ceiling shower coolant
Refrigerated and temperature-controlled spindle,ballscrews and motor mounts
Helical interpolation
Spindle air curtain
Spindle oil chiller
Flood coolant
2 MB Total program memory
Tool offset memory type C
Custom Macro B

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/3903747-used-chiron-fz15s-vertical-machining-center

Pre-owned: AWEA SP-2016 HSS Vertical Machining Center

Equipped with:
Controller: FANUC 18i-MB

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/5803301-used-awea-sp-2016-hss-vertical-machining-center-bridge-type

Pre-owned:CHIRON FZ15S VERTICAL MACHINING CENTER

Quantity: 3 Machines Available

Equipped with:
Basket Tool changer
2-axis swivel rotary table for 5-axis simultaneous and complete machining
Controller Siemens 840D

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/3903747-used-chiron-fz15s-vertical-machining-center

Pre-owned: 2019 ENSHU GE 480H HMC 20K RPM, HSK63A (VERY LOW HOURS)

Equipped with:
Fanuc Series 31i Model B
Coolant thru-spindle
Full Rotary Bi-Directional B Axis
FANUC 74 HP Spindle Drive
Rotary automatic pallet changer
Chip Blaster
1200mm high, rear discharge rolling filter chip conveyor with magnetic separator
High-volume rolling filter chip conveyor.
Linear Guides (Cross roller)
Through spindle coolant 100 psi
Ceiling shower coolant
Refrigerated and temperature-controlled spindle,ballscrews and motor mounts
Helical interpolation
Spindle air curtain
Spindle oil chiller
Flood coolant
2 MB Total program memory
Tool offset memory type C
Custom Macro B

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/4647464-used-2019-enshu-ge-480h-hmc-20k-rpm-hsk63a-very-low-hours

Pre-owned DMV -5025 Vertical Machining Center
Equipped with:
Fanuc 21i-MB CNC Control
Chip Conveyor
Mist collector
Chip blaster
Chiller
Cooljet
Coolant tank
Flood Coolant

For specs and more, visit us at:https://www.gizmo-mt.ca/listings/5583479-used-dmv-5025-vertical-machining-center

Pre-owned DAHLIH Vertical Machining Centre (3 Axis)
Equipped with:
• Coolant Tank
• Levelling Pads
• Chip Auger
• Spindle Chiller

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/5635457-used-dahlih-vertical-machining-centre-3-axis

Pre-owned Doosan V850 Vertical Turning Lathe
Equipped with:
FANUC 21I-TB CNC CONTROL, CHIP BLASTER
CHIP CONVEYOR
PICTURED TOOLING ON TURRET
AVAILABLE MANUALS

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/5548313-used-doosan-v850-vertical-turning-lathe

Pre-owned HWACHEON HI TECH 200 CL WITH INDEX CHUCK
Equipped with:
Controller : Controller FANUC Series 0i-TC , Indexing chuck with hydraulic unit, Chip conveyor, Miscellaneous tool holders, Tail Stock, Tool Eye

For specs and more, visit us at :https://www.gizmo-mt.ca/listings/5118862-used-hwacheon-hi-tech-200-cl-with-index-chuck

Pre-owned OKUMA HOWA HL-20
Equipped with:
Controller : FANUC Series 18i-T, 6-inch chuck, Misc. Tool Holders,Chip conveyor, Coolant system, Tailstock

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/5223866-used-kiwa-kh-45g-horizontal-machining-center

🔧 Introducing our comprehensive CNC service solutions!

Experience rapid troubleshooting and diagnostics, expert electro-mechanical services, smooth machine start-up and installation, along with essential preventative maintenance.

Ensure your CNC machines operate at peak performance.

Discover more at 👉 https://www.gizmo-mt.ca/pages/service

Pre-owned DAEWOO PUMA 240 MSB WITH SUB SPINDLE AND MILLING. Equipped with:
Controller : FANUC 18i-TB, TOOLSETTER ,ATS COLLET CLOSER ON SUBSPINDLE,PARTS CATCHER,PARTS CONVEYOR,Chip conveyor and Tool Eye

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/5118975-used-daewoo-puma-240-msb-with-sub-spindle-and-milling

Pre-owned TAKUMI V22A VERTICAL MACHINING CENTER. Equipped with CONTROLLER MITSUBISHI, 24 STATION AUTOMATIC TOOL CHANGER, SPINDLE CHILLER, DUAL CHIP CONVEYORS, HANDHELD MPG

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4542206-used-takumi-v22a-vertical-machining-center

Pre-owned MURATEC ML-400 TURNING CENTER. Equipped with Muratec Fanuc CNC FS-32i, Fanuc Gantry Loader, Tail Stock, Collet Chuck, Chip Conveyor, Coolant tank

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/3903742-used-muratec-ml-400-turning-center

Pre-owned MAZAK QUICK TURN NEXUS 250 II. Equipped with CONTROLLER MAZATROL MATRIX NEXUS, Chip Conveyor, Coolant tank

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4335211-used-mazak-quick-turn-nexus-250-ii

Pre-owned MAZAK QTN-200-II. Equipped with Controller Mazatrol Matrix Nexus, Integral Spindle, Chip Conveyor, Coolant tank, Tool Setter & Parts Catcher,

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4621616-used-mazak-qtn-200-ii

Pre-owned DOOSAN PUMA 240C TURNING CENTER. Equipped with FANUC SERIES i Controller, Chip Conveyor, Transformer, Coolant Tank.

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4997215-used-doosan-puma-240c-turning-center

Pre-owned NAKAMURA TOME TW-10 Turning Center. Equipped with Fanuc Series 18i-T, Chip Conveyor, Twin Turret / Twin Spindle with C Axis, LNS Automatic Bar Feeder, Comes with 7 Live Tools, All 12 Live Tools Turret, ATS Collet Chucks on Both Spindle, Parts Conveyor, Coolant System ,Automatic Lubrication system.

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4755224-used-nakamura-tome-cnc-turning-center

Pre-owned DOOSAN TT-1500SY TURNING CENTER. Equipped with FANUC 18i TB CNC CONTROL, Y-AXIS, B Axis, Full C Axis CHIP CONVEYOR, TOOL SETTER, PARTS CATCHER, PARTS CONVEYOR, LNS QUICK LOAD SERVO 65 MAGAZINE BAR LOADER

For specs and more, visit us at : https://www.gizmo-mt.ca/listings/4780710-used-doosan-tt-1500sy-turning-center