How To Weed

Sponsored by: Cart&Pod
Purchase the items used in this video:
Emu Oil: https://howtow**d.ca/recommends/emu-oil/
Nerodoil Terpene: https://howtow**d.ca/recommends/nerolidol/
Silicone Patch: https://howtow**d.ca/recommends/silicone-patch/

In this video, I show you how to make a THC Transdermal Patch using easily sourced ingredients from Amazon. These patches last for several hours and are a healthier alternative to smoking.

First, for the transdermal base, you will need to mix some Nerolidol with Emu Oil. I used 2.5g of Emu Oil and 0.1ml of Nerolidol and 350mg of 95% THC Distillate.
Put everything into a jar and stir until mixed. Here I am using a magnetic hot plate with a stir bar but you can stir by hand and use another heat source if you don't have one.

After mixing the Transdermal Oil, apply it to a patch. For this video, I used a high absorbancy silicone patch, but you can use whatever you think will work best.
Apply a light coating of the non-mixed emu oil to allow the patch to presoak for about 10 minutes, then apply the Trabsdermal oil and you're done!

Support me on Patreon: https://www.patreon.com/HowToW**d

Instagram - - https://instagram.com/johnbrowncannabis/
Twitter: - https://twitter.com/JohnBrownCanna
Discord: https://discord.gg/CahhFKZ

Purchase the EnivroKlenz unit here : https://zurl.co/IlIV
Thanks to https://enviroklenz.com/ for sending me the product to review!
Support me on Patreon: https://www.patreon.com/HowToW**d

Check out my friends who where in the video:
Cory - https://m.youtube.com/channel/UCC_2eIcm70HbOV5cSU5FJ9A
Mountain Dew Man - https://www.youtube.com/channel/UCucdhgIwsvTubg_mvjX_--g

Instagram - - https://instagram.com/johnbrowncannabis/
Twitter: - https://twitter.com/JohnBrownCanna
Discord: https://discord.gg/CahhFKZ

Decarboxylation is the process of converting THCA, the non-psychoactive precursor to THC, into THC. This is done by removing the carboxyl group with heat, which allows the THC molecule to fit into the cannabinoid receptors in our brains. To decarboxylate your cannabis, simply set your oven to 122C or 252F for one to two hours. THCA converts to THC at a rate of 87.7%, so 1 gram of THCA will convert to 0.877 grams of THC. It's important to note that THC can be destroyed by heat, but studies have shown that the rate of conversion is so low it is hardly noticeable and not worth worrying about. To make edibles with decarboxylated cannabis, simply mix it into your recipe of choice, such as brownies or cookies. Be sure to store your edibles in a cool, dark place to prevent THC degradation.

►CHANNEL STORE: https://cartandpod.com
►SUPPORT US ON PATREON: https://www.patreon.com/HowToW**d
►CHANNEL WEBSITE: https://howtow**d.ca

FOLLOW ME ELSEWHERE
---------------------------------------------------
Twitter: https://twitter.com/JohnBrownCanna
Instagram: https://instagram.com/johnbrowncannabis/
Discord: https://discord.gg/CahhFKZ

00:00 What is Decarboxylation?

The Cannabis plant does not produce THC (Delta-9-tetrahydrocannabinol) directly. Instead, it first produces a precursor to THC, called THC-A (tetrahydrocannabinolic acid). Decarboxylation is the chemical reaction responsible for the removal of the carboxylic acid group, converting the THCA into THC.

00:22 - What is a carboxyl group?

To keep it relatively simple without going too deep into the chemistry, it is a single Hydrogen and Carbon Atom with two Oxygen atoms that are all grouped together and bonded to the THC. Heat or time causing this bond to break is Decarboxylization.

00:38 - Why break the bond?

THCA is non-psychoactive, meaning it won't get you high. The reason THC-A is non-psychoactive is that the THCA molecule is too large to fit into our brains' cannabinoid receptors compared to a THC molecule due to the additional carboxyl group.

Now you may be thinking, "that doesn't make sense, I smoke w**d all the time and it gets me high. How does that work if there is only THCA and it is not non-psychoactive?"
Well, what happens when you smoke or vaporize cannabis is that you are applying heat to the THCA and decarbing it as you smoke it, breaking down the THCA into THC by destroying the carboxyl group with heat as you smoke it.

01:15 - How to decarboxylate?

Just set your oven to 122C or 252F and you're set. Leave it for an hour or two and you will have decarboxylated your cannabis fully and it will be ready for edibles. You can put the cannabis in a sealed glass mason jar to reduce smell and keep some of the terpenes in. It's also worth noting that THCA converts to THC at a rate of 87.7%, so 1 gram of THCA will convert to 0.877 gram of THC. This rate is used when calculating the percentage of THC in a product in stores. Most of the time there is not THC but THCA instead but they show the converted rate.

02:00 - Can you overcook it and ruin the THC?

There is a lot of misinformation floating around the internet about decarboxylation. Some of it roots from one poorly done study that made this graph:

It leads many to believe that low temperature was needed and higher temperatures above 250F would nearly immediately destroy the THC content. However, this study was flawed as it was heated on an open glass surface exposed to air and oxidization as well as being extremely low thc content to begin with. As you can see there was less than 15mg of THC content per gram at the peak, for 'hexane concentrate' that is a very low THC per gram of less than 1.5%

03:45 - A more modern study found more relevant information.

In the study, they dissolved 25 grams of Kief in 500ml of liquid coconut oil. Their solution sat for two months and before starting lab analysis which found the THCA solution was free from CBN. This gave a baseline of 0.00% CBN concentration.

The THCA solution was set on a Hotplate Stirrer, the probe temperature to 122°C and plate temperature to 350°C. Once the solution reached the set temperature the Multi-Timer automatically engaged the device for 24-hours.

Sample #1(6 Hour Collection) | THC to CBN Conversion: 0.1 mg/ml
Sample #2 (12 Hour Collection)| THC to CBN Conversion: 0.2 mg/ml
Sample #3 (18 Hour Collection)| THC to CBN Conversion: 0.3 mg/ml
Sample #4 (24 Hour Collection)| THC to CBN Conversion: 0.4 mg/ml

I hope this helps out your mind at ease when decarbing in the future. Good luck with making some great edibles!

Sources:

https://catscientific.com/decarboxylating-cannabis/

https://kundoc.com/pdf-determination-of-cannabinoid-acids-by-high-performance-liquid-chromatography-of-.html

Purchase Powdered Peanut Butter - https://howtow**d.ca/recommends/pb2-powdered-peanut-butter/
Purchase Ardent Nova - https://howtow**d.ca/recommends/ardent-nova/
Support me on Patreon: https://www.patreon.com/HowToW**d
In this video, I show you how to make some peanut butter cannabis.

All you need is Coconut oil, Cannabis, and PB2 peanut butter, which you can purchase using this link to support the channel: https://howtow**d.ca/recommends/pb2-powdered-peanut-butter/

Simply decarb the Cannabis, for this step I use the Ardent Nova which you can purchase here and support the channel by doing so: https://howtow**d.ca/recommends/ardent-nova/

Then infuse the Cannabis with the coconut oil. You can do so by heating the oil and the cannabis to infuse. The Ardent Nova also works for this step.

Then simply strain the oil, and mix with the peanut butter powder and you have cannabis peanut butter!

Instagram - - https://instagram.com/johnbrowncannabis/
Twitter: - https://twitter.com/JohnBrownCanna
Discord: https://discord.gg/CahhFKZ

Support me on Patreon: https://www.patreon.com/HowToW**d

In this video, I show you how to make THC Gummie candies super easily. This requires no recipe. Simply melt down some previously purchased gummy candy and add in some THC concentrate (decarboxylated), stir, then pour into a mold. Place the mold in the freezer for about an hour to set and your candy is good to go! You can also roll the candy in sugar to make it less sticky to the touch.

Link to Purchase Gummy Bear Mold: https://howtow**d.ca/recommends/gummy-bear-mold/
Link to Purchase 1000 mL Beaker: https://howtow**d.ca/recommends/1000-ml-beaker/
Link to Purchase Hot Plate with Stirrer - https://HowToW**d.ca/recommends/hotplate-with-magnetic-stirrer/
Link to Purchase Temperature Gun - https://HowToW**d.ca/recommends/temperature-gun/

Support me on Patreon: https://www.patreon.com/HowToW**d
Instagram - - https://instagram.com/johnbrowncannabis/
Twitter: - https://twitter.com/JohnBrownCanna
Discord: https://discord.gg/CahhFKZ

Check out https://CartAndPod.com Shopping at Cart&Pod helps support this channel!

In this video, I take 7 different kinds of cannabis concentrate and make them all into THC Carts. I show you how to turn: Shatter, Sugar Wax, Live Resin, Caviar, Terp Sauce, Budder, and Distillate into individual Cartridges.

Purchase Terpenes from me personally at https://HowToW**d.ca/recommends/terpenes/

►CHANNEL V**E STORE: https://cartandpod.com
►SUPPORT US ON PATREON: https://www.patreon.com/HowToW**d
►CHANNEL WEBSITE: https://howtow**d.ca

AFFILIATES & REFERRALS
---------------------------------------------------
►Terpenes: https://HowToW**d.ca/recommends/terpenes/
►Vials: https://howtow**d.ca/recommends/dram-vial/
►Hot Plate with Stirrer - https://HowToW**d.ca/recommends/hotplate-with-magnetic-stirrer/
►Syringe: https://HowToW**d.ca/recommends/5ml-syringe-sterile/
►Temperature Gun: https://HowToW**d.ca/recommends/temperature-gun/
►510 V**e Carts: https://howtow**d.ca/recommends/v**e-cartridges/

FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: https://twitter.com/JohnBrownCanna
Instagram: https://instagram.com/johnbrowncannabis/
Discord: https://discord.gg/CahhFKZ

YOUTUBE MAGIC
---------------------------------------------------
00:00 - Live Resin
00:20 - Caviar
00:39 - Terp Sauce
00:58 - Shatter
01:06 - Budder
01:19 - Sugar Wax
01:35 - Distillate
01:47 - Transfer to Dram Vials
03:15 - Decarb
05:50 - Fill the V**e Carts
08:06 - Hitting the V**es

**e