NTM Electronics
NTM Electronics specializes in component level repair of most electronics. NTM also works on custom cable assembly and repair.
As of this time I do not work actively on most cellphones, tablets, or computers.
16/08/2024
Supplied and replaced the speed control part for a TX66 combine.
11/08/2024
Making a couple custom weather pack extension cables
29/06/2024
Working on some 23 conductor extension cables for mining equipment.
22/06/2024
I don't always repair expensive things... Lamps are fun too
18/06/2024
Been busy with Eaton T110 remotes during the warm season.
24/04/2024
A relaxing 2 hour drive one way to get a few wiring issues figured out on some farm equipment before the season starts makes for a great day.
13/04/2024
Have been busy with tethered remotes the last few weeks.
Whether you need a repair or a replica made, I can likely help you out for a fraction of the cost of brand new.
24/03/2024
Serviced a few angle grinders.
23/02/2024
Custom pigtail for a skidoo.
19/02/2024
Hot tubs usually fail at the worst times. I recommend heater/failsafe relay replacements every 5 - 7 years (or when your element is replaced).
Most hot tub main board repairs can be completed within a couple business days.
13/02/2024
Had this lil beauty dropped off to repair. Got this one up and running in a couple days.
03/02/2024
Repaired a mini lathe control board. The previous shop was unable to repair after several months. Got this customer up and running in a couple weeks and provided additional support to make sure the wiring was correct!
22/01/2024
If you think ribbon cables are a thing of the past, they kind of are.... But I've made and repaired lots of these cables. Even came up with solutions to replace obsolete/proprietary ends and even made solutions to nearly eliminate pesky service calls.
13/01/2024
This grease gun had intermittent power issues. Found the board issue and it seems to be working good now.
Will be doing more off warranty tool repairs on a case by case basis depending on part availability.
29/10/2023
These pads should be touching, but they aren't... Let's play matchmaker and connect these
20/10/2023
T110 remote repairs never stop.
17/10/2023
It can be a challenge to replace USB ports when there are virtually no anchor points or pads left.
Using a hobbiest "trade secret" remedy will almost ensure this port will never come off again.
08/10/2023
Supplied and replaced a set of joysticks for a GL300C Phantom 4 remote.
Customer did a quick calibration through the app and was set to fly in no time.
07/10/2023
Replaced a speed control pot for a TX66 New Holland combine for a fraction of the cost of the OEM part.