Smart Home &Consumer Electronics

Product name: K3 flat electric walking machine
Output power: 0.5HP
Peak power: 1.0HP-1.5hp)
Speed range: 1-3km
Features: Wireless remote control HD LED screen time speed
Maximum bearing weight: 110KG
Running area: 475*330(mm)
Product size: 520*410*125(mm)
Packing size: 570*450*170 (mm)
Net weight, gross weight: 14KG/15KG

Smart Home &Consumer Electronics updated their website address.

HCR-05 Window cleaning robot , square design, fashion and amazing, sells very good in Europ, America, Japan, Russia, etc.

Dirty windows of your home annoyed, do not worry about that smart window cleaning mop make your life clean and delight

HCR-08 window cleaning robot

Window cleaning robot HCR-07, which sells good on European market,

Recently loved this window cleaning robot so much!
It could wipe most of smoothly surfaces quickly and kindly. Just need you put it on the windows, it could work better than human cleaning. Wet & Dry clean all well done. You will love this cute 🥰 home assistance absolutely!

Cheapest Robot vacum cleaner!!!!!! STOCK SALE!!!!

New type window cleaning robot 2021!!!

2021 New Smart consumer electrics

BL-03W

Smart Home &Consumer Electronics updated their phone number.

Jason Chen
Email:[email protected]
Whatsapp:0086 18810376223

How to maintain the robot and maintenance knowledge

1.battery maintenance, so that the battery fully discharge and charge, to improve the performance of the battery.Do not forget to open the charging seat before leaving the house, so that the robot can not automatically recharge, often directly cut off the power to stop working is not good for the machine, if a long time do not use the sweeper, it is suggested to remove the battery, put it in a cool and dry place for storage, remember not to expose the battery.

2. We should check the integrity and wear degree of the roller brush seals of the sweeper, replace the seals and roller brushes with more serious wear, and check the tension of the connecting parts when replacing, and use the corresponding tools to tensioning.

3.Open the outer cover of the sweeping machine and remove the dust inside it. We can use tools such as a hair dryer and industrial vacuum cleaner to operate.

4.Focus on the maintenance and cleaning of the dust-collecting box and filter of the sweeper, and focus on cleaning the parts with more serious pollution.And the filter should be replaced and adjusted according to the extent of damage.

5.regular cleaning brush and brush, in the process of use will often be long hair wrapped to the brush group, if you do not manually clean the hair for a long time, it will increase the battery load, which directly affects the life of the battery, and may even lead to the machine can not work properly, or burn the motor.Therefore, it is recommended that the brush group (edge brush and roller brush) be removed and cleaned manually on a weekly basis.

6.Use special lubricating oil to lubricate the bearings and brake systems of the sweeper. At the same time, the oil in the engine also needs to be replaced for the oil-fired sweeper to ensure that the bearing points are lubricated without rust.

7.Check the wear of each circuit of the sweeper, and replace and repair it according to the severity of the wear to ensure that the circuit does not appear short circuit and other phenomena.

8.For electric sweeper, we should focus on the repair and maintenance of its controller and motor, and find professional technicians for maintenance if the operation is abnormal and the noise is too large.

9.Clean up the filter screen regularly. The filter screen is the equipment for filtering garbage.It is recommended to take out the dust collection box every week, spend a little time to clean the filter, and then dry the filter with a cloth, put it in a dry place to dry and dry naturally, otherwise the filter is easy to be corroded.

10.Battery as the main power source of sweeper, we must do its maintenance work well. First of all, check whether the loss of power and discharge are normal after one year of use.And according to the position of the battery acid solution for the corresponding increase.

11.Check the operation status of seat safety contact switch, check the position of battery acid, check the tightness, wear and operation status of drive belt.(V-shaped belt, round belt), check the wear of the brushes on each side, adjust and replace them properly.

Matters needing attention in the use of sweeping robot:

1.do not put the sweeping robot placed in a wet environment, otherwise it is easy to make the motor damp and short circuit, burn the motor.At the same time, non-wet and dry cleaning robot must not be used to absorb water.Store in a dry carton when not in use.

2.Be careful not to inhale matches, cigarette butts and other easy items into the sweeping robot.

3. Do not use the sweeping robot continuously for a long time. If you feel the fuselage is overheating, you should stop it for a period of time and then use it to prevent the motor from burning down due to overheating.

3.The bottom of the robot fuselage is the disaster area where the dust accumulations. If too much dust accumulations there, it will not only cover the infrared sensor, but also may enter the machine to cause a short circuit of the main board, which will burn the machine.

4.When the sweeping robot is not in use, please turn off the switch and shut off the power supply after the power is fully charged, and then use it when it is fully charged.

5. the charging seat is forbidden to put together with other electrical appliances (such as: TV, router, etc.) in order to avoid the use of the remote control by the electrical signal interference remote control is not sensitive.

5.sweep robot is equipped with side brush, brush, in the process of normal use, it is easy to fine content, such as hair could easily lead to motor fever, consuming more power, resulting in a shortened battery life, and even electricity opportunities were stuck in a rotation for burning, so, we need to clean up in time in the process of daily use winding on the side brush, brush hair.

The above is how to sweep the robot maintenance and maintenance knowledge of the first content, a good use habits and maintenance skills can help sweep the robot to have a better cleaning effect and pra

Product name: three-in-one sweeper robot
Model: XFX-003
Input Voltage: DC 5V
Input Current: 0.5~1A
Power Supply: USB/18650
Rated Voltage /Output: DC 2V
Rated Power /Output: 4W
Casing Material /Casing Material: ABS
Product net weight/N. W: 670g
Gross weight/G.W: 750g
Item Size: 230*68mm
Packing Size: 355x290x80mm
Packing quantity: 24
Gross packing weight: 18KG
Net weight of packing: 16KG
Dimensions of outer case: 65.5*35.5*88cm