DKTEC Concrete mixer truck

Concrete mixer truck
Maintenance Tipsd⑤
Tire maintenance
Winter roads can be icy or snowy, so the grip of your tires can be affected. Tire pressure and wear should be checked regularly and replaced if necessary. You can also use professional winter tires or tire chains to improve the vehicle's driving safety on icy and snowy roads.

Concrete mixer truck
Maintenance Tips ④
Hydraulic system maintenance:
Hydraulic oil can become viscous at low temperatures, causing the hydraulic system of a small mixer truck to run poorly. Therefore, it is recommended to choose low-viscosity hydraulic oil in winter and replace it regularly. At the same time, ensure that the hydraulic system has good sealing to prevent the intrusion of moisture and impurities.

concrete mixer truck
Maintenance Tips
Warm up:
Before starting the vehicle, it should be warmed up. Hot water or electric heating can be used to preheat the engine and hydraulic system. The preheating time should not be too long to avoid damage to the vehicle.

CONCRETE MIXER TRUCK
Winter maintenance tips②
Antifreeze: In winter, the freezing point of antifreeze should be lower than the lowest expected temperature. It is recommended to use high-quality antifreeze from professional brands, check the level of antifreeze regularly, and replenish it in time when it is insufficient.

In the cold winter, users of small mixer trucks need to pay special attention to how to protect their vehicles to prevent freezing and damage caused by low temperatures. The following are some practical antifreeze methods, I hope they can be helpful to everyone.
Little tips ①:
Insulation measures: Before winter comes, conduct an inspection and maintenance on the mixer truck to ensure that the vehicle's insulation system is functioning properly. At the same time, professional winter engine oil should be used to reduce engine wear and improve fuel efficiency.

12 cubic meters mixer truck

Debugging is in progress and can be delivered soon
If you want more detailed information and quotation,
please contact：[email protected]

On-site mixing machine——Volumetric Mixer

Application field：
Mortar concrete
Polymer concrete
Foam concrete
Quick-setting concrete
Shotcrete
Self-compacting concrete
Colored permeable concrete
Pervious concrete Ceramsite concrete

DKTEC Volumetric Mixer

1.Aggregate Bin
The integrated bin o fDK-410L series contains central divider, facilities the store of gravel and aggregate.
2.Admixture-Adding System
Made of galvanized steel tank/ stainless steel tank,used for adding all sorts of admixtures to specific concretes.
3.Cement Bin
Containing the patented rotary feeding system.
4.Output Counter
Capable of measuring the output with precision,facilitates the supervision of production.
5.Fiber-Adding System
Capable of adding fiber to the concrete precisely as required.
6.The Mixer
The mixer is equipped with an adjustable (up and down) half-reducing helix and a manual telescopic groove connected to the mixer.
7.Control Panel
Used to control the lifting and lowering of the mixer and the amount of water flow, admixtures.
8.Intelligent Data Uploading and Printing.

If you want to know more details, please contact us.
+86 571 88128581
[email protected]

DKTEC Volumetric Mixer
Suitable for bridge decks , road maintenance, groove filling, concrete mixer production shotcrete, production of precast parts,

With real-time mixing, our volumetric mixers give you total flexibility to finish the job.

Volumetric Mixer

On-site mixing machine:Volumetric mixer is a complete
batching plant for mixing directly on-site holding the
materials in different compartments.
Materials are dosed into the single shaft ribbon mixer
according to recipe and automatically controlled by the
onboard computer.