Taiyuan PLS Engineering & Technology CO.,Ltd

No. 2 Flying Shear of Hot Rolling Mill Production Line
Uses: head-cut and tail-cut , and chopped pieces in accident
Cutting area : Max. diameter 12-70mm
Cutting temperature: Min.650¡ãc
Max. cutting force: 300
Rotate semi-diameter: 215-455mm
Cutting speed: 2.6-16m/s
Speed of roller: 2.6-16m/s
Effective cutting width:160mm
Length of cutting head:Max.200mm
1.Uses:
head-cut and tail-cut , and chopped pieces in accident
2.Location:
It can be Installed between the second mill and finishing mill
3.Technical Data:
The max shearing section:1250 mm2
Rolling temperature:¡Ý 650¡ãc
Shear speed:2.2-18 m / s

300t Cold Pendulum Shear of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Fast Heating Induction Furnace of Hot Rolling Mill Production Line
The matched heating furnace in our company is such a continuous system heating from billet to the rolling.
According to differentiate of heat source,there are fuel heating furnace and induction heating furnace.According to the fuel,there are natural gas furnace and coal gas heating furnace.
And these pusher-type heating furnace,walking beam furnace and roller hearth heating furnace belong to continuous heating furnace.
Equipment features
Billet black print small is for getting the rolling of high precision thickness, width, and cross-section size.
Furnace's length is short..
Eliminate the scratch of sliding rail, high product quality.
Furnace's sealing, safety and thermal efficiency are high.
When stop rolling the billet will be out, without iron oxide damage of staying in high temperature furnace
Billet replacement is simple.
Bonded steel and arch steel will not happen, the length of furnace can be designed for longer.

Crank Flying Shear of Hot Rolling Mill Production Line
Equipment features:
1. The crank mechanism of flying shear make the two shearing blade translational motion, in the shearing area the blade nearly perpendicular to the rolling, thus the cutting quality is very good.
2. With adjustable blade slack adjuster, can eliminate the gear clearance and guarantee the reasonable gap between up and down blades.
3. Shear driven with a DC motor by braking-wheel coupling, transmission device connected with the gear box which is in the shear box, with meshing down crank gear.
4. Motor shaft with the brake.
Technical data:
Blanking section: 7000mm2
Shearing temperature: Min 900
Max shearing force: 700KN
Gyration radius: 120/125mm
Rolling speed: 0.5~2m/s
Blade shearing speed: 0.5~2m/s

Hot Rolling Mill Stand of Hot Rolling Mill Machine Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

650 3-High Rolling Mill of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Heating Furnace of Hot Rolling Mill Production Line
The matched heating furnace in our company is such a continuous system heating from billet to the rolling.
According to differentiate of heat source,there are fuel heating furnace and induction heating furnace.According to the fuel,there are natural gas furnace and coal gas heating furnace.
And these pusher-type heating furnace,walking beam furnace and roller hearth heating furnace belong to continuous heating furnace.
Equipment features
Billet black print small is for getting the rolling of high precision thickness, width, and cross-section size.
Furnace's length is short..
Eliminate the scratch of sliding rail, high product quality.
Furnace's sealing, safety and thermal efficiency are high.
When stop rolling the billet will be out, without iron oxide damage of staying in high temperature furnace
Billet replacement is simple.
Bonded steel and arch steel will not happen, the length of furnace can be designed for longer.

Walking Beam Induction Heating Furnace of Hot Rolling Mill Production Line
The matched heating furnace in our company is such a continuous system heating from billet to the rolling.
According to differentiate of heat source,there are fuel heating furnace and induction heating furnace.According to the fuel,there are natural gas furnace and coal gas heating furnace.
And these pusher-type heating furnace,walking beam furnace and roller hearth heating furnace belong to continuous heating furnace.
Equipment features
Billet black print small is for getting the rolling of high precision thickness, width, and cross-section size.
Furnace's length is short..
Eliminate the scratch of sliding rail, high product quality.
Furnace's sealing, safety and thermal efficiency are high.
When stop rolling the billet will be out, without iron oxide damage of staying in high temperature furnace
Billet replacement is simple.
Bonded steel and arch steel will not happen, the length of furnace can be designed for longer.

Cold Shear of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Rebar Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Crank flying shear of Hot Rolling Mill Production Line
The crank mechanism of flying shear make the two shearing blade translational motion, in the shearing area the blade nearly perpendicular to the rolling, thus the cutting quality is very good.With adjustable blade slack adjuster, can eliminate the gear clearance and guarantee the reasonable gap between up and down blades.Shear driven with a DC motor by braking-wheel coupling, transmission device connected with the gear box which is in the shear box, with meshing down crank gear.Motor shaft with the brake.Overload overflow protection can assure no leakage. Able to work under rated load continuously,stable working and high precision.Integrated hydraulic transmission system, pneumatic linked return, with good reliability. All seals in cylinder is VALQUA from Japan,the most famous brand,best quality.

Sizing Cold Shear of Hot Rolling Mill Production Line
Uses: head-cut and tail-cut , and chopped pieces in accident
Cutting area : Max. diameter 12-70mm
Cutting temperature: Min.650¡ãc
Max. cutting force: 300
Rotate semi-diameter: 215-455mm
Cutting speed: 2.6-16m/s
Speed of roller: 2.6-16m/s
Effective cutting width:160mm
Length of cutting head:Max.200mm
1.Uses:
head-cut and tail-cut , and chopped pieces in accident
2.Location:
It can be Installed between the second mill and finishing mill
3.Technical Data:
The max shearing section:1250 mm2
Rolling temperature:¡Ý 650¡ãc
Shear speed:2.2-18 m / s

No. 3 Flying Shear of Hot Rolling Mill Production Line
Uses: head-cut and tail-cut , and chopped pieces in accident
Cutting area : Max. diameter 12-70mm
Cutting temperature: Min.650¡ãc
Max. cutting force: 300
Rotate semi-diameter: 215-455mm
Cutting speed: 2.6-16m/s
Speed of roller: 2.6-16m/s
Effective cutting width:160mm
Length of cutting head:Max.200mm
1.Uses:
head-cut and tail-cut , and chopped pieces in accident
2.Location:
It can be Installed between the second mill and finishing mill
3.Technical Data:
The max shearing section:1250 mm2
Rolling temperature:¡Ý 650¡ãc
Shear speed:2.2-18 m / s

High Pressure Water Descaling of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Crank Rotary Flying Shear of Hot Rolling Mill Production Line
Uses: head-cut and tail-cut , and chopped pieces in accident
Cutting area : Max. diameter 12-70mm
Cutting temperature: Min.650¡ãc
Max. cutting force: 300
Rotate semi-diameter: 215-455mm
Cutting speed: 2.6-16m/s
Speed of roller: 2.6-16m/s
Effective cutting width:160mm
Length of cutting head:Max.200mm
1.Uses:
head-cut and tail-cut , and chopped pieces in accident
2.Location:
It can be Installed between the second mill and finishing mill
3.Technical Data:
The max shearing section:1250 mm2
Rolling temperature:¡Ý 650¡ãc
Shear speed:2.2-18 m / s

850 T Cold Shear of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

No. 1 Flying Shear of Hot Rolling Mill Production Line
Uses: head-cut and tail-cut , and chopped pieces in accident
Cutting area : Max. diameter 12-70mm
Cutting temperature: Min.650¡ãc
Max. cutting force: 300
Rotate semi-diameter: 215-455mm
Cutting speed: 2.6-16m/s
Speed of roller: 2.6-16m/s
Effective cutting width:160mm
Length of cutting head:Max.200mm
1.Uses:
head-cut and tail-cut , and chopped pieces in accident
2.Location:
It can be Installed between the second mill and finishing mill
3.Technical Data:
The max shearing section:1250 mm2
Rolling temperature:¡Ý 650¡ãc
Shear speed:2.2-18 m / s

Rebar of Hot Rolling Mill Machine Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

Shifting Reversing Mill SRM of Hot Rolling Mill Machine Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.

450 T Cold Pendulum Shear of Hot Rolling Mill Production Line
High speed wire rod rolling mill and finishing mill with rolling speed from 36m/s to 120m/s can turn billets with cross section areas of 150 x 150 mm into wire rod with diameters of 5.5 - 14 mm. Its annual output can reach 200000 - 750000 tons.
Various specifications of Roughing Mill, Intermediate Rolling Mill, Pre-Finishing mill, Finished Mill could be designed and manufactured.
We supply the whole production line, from induction furnace, to rolling mills, walking beam cooling bed, auto packing etc.
We can send engineers to your factory to install the machines. We have 30 years' experience in producing these products, and 2 years' experience in exporting these products.
We can design according to our customers' requirements and we will do our best to meet their needs .For the above reasons, our products not only have a ready sale in domestic market but are also exported to Armenia, Russia, Kazakhstan, Iran and other countries and regions.