ACME

ACME

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from ACME, Heating, ventilating & air conditioning service, .

Photos from ACME's post 11/12/2023

Induction Heating Furnace
Furnace can be used for deposition, carbonization, siliconization, graphitization, sintering and other treatment. It can meet the temperature requirement upto 3000℃.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 08/12/2023

Vacuum Carbonization Furnace
This furnace is used for low temperature and high temperature carbonization of composite materials. It can also be used for debinding and sintering of special materials under oxygen atmosphere. It has both horizontal and vertical structures.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 07/12/2023

CVD Furnace(C)
Furnace is used for material CVD/CVI treatment by using hydrocarbon gases (like C3H6,CH4 ) . It has both horizontal and vertical structures.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 06/12/2023

Gas Atomization Powder Production Equipment
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 05/12/2023

Pusher Type Reduction Furnace
Pusher type furnace is mainly suitable for metal powder (like tungsten, moly, etc) reduction and powder metallurgy part sintering.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 04/12/2023

Vacuum Debinding and Sintering Furnace
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 01/12/2023

Vacuum Hot Press Furnace
Vacuum hot press furnace is widely used for all kinds of composite materials, high conduct thermal material, SiC/Si3N4/B4C ceramic materials, copper base iron power materials, iron base materials, iron-copper base power materials shaping, densification.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 30/11/2023

Vertical Bottom Loading Vacuum Brazing Furnace
Vacuum bottom loading furnace is used for vacuum brazing of materials like non-ferrous metal, stainless steel, titanium alloy, high temperature alloy.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 29/11/2023

Vacuum Diffusion Welding Furnace
ACME vacuum furnace is VDP standard type brazing and diffusion furnace mainly used for diffusion treating tubing blade, falcon head, missile fuse process in aerospace and boat area. Diffusion welding is widely used for diffusion welding in different kinds of metal materials, also for different metal and ceramic materials and non-metal material diffusion welding.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 28/11/2023

Horizontal Double Chamber Vacuum Carburizing Furnace
Horizontal Double Chamber Vacuum Carburizing Furnace
Horizontal vacuum carburizing furnace is applied for the carburizing and quenching like structure steel (20CrMnTi, 12Cr2Ni4A, 12Cr2Ni3A,etc), high alloy carburizing steel, stainless steel (1Cr13, etc), quenching of tool steel and die steel, quenching and annealing of gear parts, sleeve parts, precision parts, glib pump and nozze mechanical parts, precision machine parts.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 23/11/2023

Vertical Vacuum Water Quenching Furnace
Vertical vacuum water quenching furnace is applied for the solution of titanium alloy in aerospace industry, such as TC4, TC16, beryllium bronze in aircraft instrument elastic elements. Precision alloy in aircraft sensor like Ni-based and Co-based high elastic alloy 3J1, 3J21, Ni-based constant elastic alloy 3J53, stainless steel in the field of nuclear energy like17-4PH, 410.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 22/11/2023

Vertical Bottom Loading Vacuum Annealing Furnace
Vertical bottom loading annealing furnace is satiable for bright annealing of materials like tool steel, die steel, high-speed steel, ultra-strength steel, magnetic material, stainless steel and non-ferrous metal. It is also specially used for vacuum annealing of large size jobs which is easy to deform, such as long pole-shape parts, shaft parts, board parts, etc.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 21/11/2023

Horizontal Vacuum Water Quenching Furnace
It is used for the solution treatment of titanium alloy in aerospace industry, such as TC4, TC16, TC18, TC21, beryllium bronze in aircraft instrument elastic elements precision alloy in aircraft sensor like Ni-based and Co-based high elastic alloy 3J1, 3J21, Ni-based constant elastic alloy 3J53, stainless steel in the field of nuclear energy like17-4PH, 410.

[email protected]

https://www.acme-furnace.com/

Photos from ACME's post 17/11/2023

Horizontal Vacuum Water Quenching Furnace
It is used for the solution treatment of titanium alloy in aerospace industry, such as TC4, TC16, TC18, TC21, beryllium bronze in aircraft instrument elastic elements precision alloy in aircraft sensor like Ni-based and Co-based high elastic alloy 3J1, 3J21, Ni-based constant elastic alloy 3J53, stainless steel in the field of nuclear energy like17-4PH, 410.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 15/11/2023

HIP and Gas Quenching Furnace
It is used for HIP and rapid cooling gas quench treatment of various metal, copper base, iron base powder, friction resistant material ceramic material and etc.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 14/11/2023

Horizontal Double Chamber Vacuum Oil Quenching Gas Cooling Furnace
It is used for vacuum oil quenching of materials like alloy steel, bearing steel, spring steel, die steel, high-speed steel etc. also for annealing and gas cooling foe the above materials.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 08/11/2023

Batch Type Purification Furnace
Furnace is used for purify treatment of graphite powder, graphite part, insulation materials and etc

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 07/11/2023

C-C / Carbon-ceramic Brake Disc Preparation Equipment
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 06/11/2023

Vacuum Graphitization Furnace
Furnace is used for high temperature graphitization treatment of composite material. It has both horizontal and vertical structures.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 02/11/2023

SS powder, Stainless steel powder, sphere metal powder, Alloy powder
ACME uses PREP method, which is using metal or alloy as the consumable electrode, and under the centrifugal force to produce spherical metal powder. This method avoid the slug and contact with refractory material, eliminate the non-metal impurities, and produce high purity spherical powder.

[email protected]

https://www.acme-furnace.com/

Photos from ACME's post 01/11/2023

Spherical High-temperature Alloy Powder
ACME uses PREP method, which is using metal or alloy as the consumable electrode, and under the centrifugal force to produce spherical metal powder. This method avoid the slug and contact with refractory material, eliminate the non-metal impurities, and produce high purity spherical powder.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 25/10/2023

Horizontal Double Chamber Vacuum Carburizing Furnace
Horizontal vacuum carburizing furnace is applied for the carburizing and quenching like structure steel (20CrMnTi, 12Cr2Ni4A, 12Cr2Ni3A,etc), high alloy carburizing steel, stainless steel (1Cr13, etc), quenching of tool steel and die steel, quenching and annealing of gear parts, sleeve parts, precision parts, glib pump and nozze mechanical parts, precision machine parts.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 25/10/2023

Vacuum Aging Furnace
It is used for vacuum aging and re-crystallize annealing after solid solution of tool steel, die steel, high speed steel, super high strength steel, stainless steel, high temperature alloy Ti alloy and etc.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 20/10/2023

Horizontal Vacuum Annealing Furnace
Horizontal Vacuum Annealing Furnace
Horizontal vacuum annealing furnace is applied for bright annealing of materials like tool steel, die steel, high speed steel, ultra-strength steel, magnetic material, stainless steel, non-ferrous, etc.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 18/10/2023

Vacuum Hydrogen Furnace
It is used for heat treatment of materials like tool steel, die steel, high-speed steel, ultra-strength steel, magnetic material, stainless steel, non-ferrous metal, and other materials in the state of hydrogen atmosphere.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 17/10/2023

Vacuum Sintering Furnace(SiC/Si3N4/AlN)
The furnace is used for reaction sintering, low pressure sintering, re-crystal sintering of ceramic product, and it can also used for production of ceramic powder. It has both horizontal and vertical structures.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 16/10/2023

Vacuum Pyrolysis Furnace
DescriptionIt used for vacuum pyrolysis process of Carbon-Ceramic composite , ceramic matrix composite material. It has both horizontal and vertical structures.Application: carbon-ceramic composite, c...

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 11/10/2023

Furnace can be used for deposition, carbonization, siliconization, graphitization, sintering and other treatment. It can meet the temperature requirement upto 3000℃.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 08/10/2023

Automatic High Temperature Sinter/Carburizing/Graphitization Furnace
Automatic carburizing furnace is mainly used for carburizing of tungsten powder, reduction of metal powders, sintering of tungsten copper alloy and sintering of tungsten and moly heavy alloy.

https://www.acme-furnace.com/

[email protected]

if you are interested in our products, please visit our official website for more details and then send your inquiry to our email

20/09/2023

Gas Atomization Powder Production Equipment
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 18/09/2023

Plasma rotating electrode atomization equipment processes metal or alloy powders with good sphericity, fewer defects, uniform and narrow particle size distribution, low impurity content, low oxygen content and low growth, which is applied for aerospace materials and addictive manufacture of special metal-based powder material.

https://www.acme-furnace.com/

[email protected]

Photos from ACME's post 15/09/2023

Mesh Belt Sinter Furnace
Mesh belt sinter furnace is mainly used for high temperature sinter of powder metallurgy ferrous and copper parts, such as oil bearing, gear, clutch plate, bushing, sleeve, etc.

https://www.acme-furnace.com/

[email protected]

12/09/2023

Batch Type Purification Furnace
Furnace is used for purify treatment of graphite powder, graphite part, insulation materials and etc.

https://www.acme-furnace.com/

[email protected]