AMable

We are here at exhibiting in hall 12.0 stand b81. Come along and discuss with us about your challenge in

Today@0900CET: for with : Pablo Capellan from Optimus3D in Spain and Demetris Photiou from Simlead in Cyprus talk about optimisation, cost reduction and innovative solutions around design.
The online session is free, you just have to register to receive the link. Click here to the registration page amable.eu/events

We are getting ready for the Design for Additive with Polymers event in our AMable Community tomorrow at 0900 CET. Meet Pablo Capellan from Optimus3D and Demetris Photiou from Simlead and discuss with them Design issues and approaches.
Register now at https://www.amable.eu/events

We are preparing an AMable Community Event: Design for Additive of Polymers – what differs from conventional? This Friday at 0900CET we discuss with two SMEs about the changes from conventional to additive design. Register now at https://www.amable.eu/events/community-events

Costs for manufacturing AM Medical components have a significant impact on the rate of AM technology integration. Therefore, it is necessary to find a cost-effective method for mass surface finishing AM parts. This was the challenge of the team around the experiment MEDISURF had to face.

In today's interview, you can find out how AMable was able to help achieve their goal and face the challenge they had with their idea.

AMable Experiment MEDISURF MEDISURF achieved an innovative solution by 3D printing. Check out how the support from AMable helped them to achieve their goal. AMable has received funding...

As an SME, it is sometimes difficult to establish yourself with the help of additive manufacturing. Especially if it struggles with profitability and financing at the beginning. That's why we offer our business service to SMEs. With this service, you receive a plan with recommendations for make-or-buy at the end.

Feel free to contact us, and we will take a look at the project together with you.

https://buff.ly/3SxsX4G

Today's experiment we are presenting to you focused on the development of polymer AM components to replace conventional metal components in a satellite. To achieve this, the team had to face several challenges. Among them was, for example, the problem of how material properties would not be compromised when additive manufacturing is used.

Read more on our website and discuss it with us. https://buff.ly/3zczWcs

Visit us at hall 110 booth b32 and see all the products that were done by European innovators.

Formnext

Additive manufacturing makes producing complex shapes with auxetic properties possible, which could not have been made with traditional manufacturing. With additive manufacturing, some challenges are made much easier and more precise, such as control of geometry and material composition of complex shapes.

In one of our most recently published interviews, a project member talks about the challenges the project faced and how AMable was able to help overcome them. Write down how AMable was able to help you or could help in future projects.

AMable Experiment AUXPRINT AUXPRINT achieved an innovative solution by 3D printing. Check out how the support from AMable helped them to achieve their goal. AMable has received funding...

Additive manufacturing comes with many challenges. One of them is the right choice of material for the product. Our AM experts will find the right material for you, taking into account the application, handling and processing. Even if you think there is no suitable material, our experts will help you.

Feel free to contact us, and we will take a look at the project together with you. https://buff.ly/3SxsMGy

Wanna be additive? We have trained more than 2000 people and supported more than 70 product ideas on their way into the market. Come to our booth and tell us what you need. Meet us at hall 11 booth b23.

Find more information on our website 👉 https://buff.ly/3fSKSp9

An accordion from a 3dprinter? Indeed, not only the shell, but also the components. Come and discuss with Casper from PIGINI which components are made by 3D printing and why. Hall 11.0 booth b32

➡️ https://buff.ly/3fSKSp9

World-famous Tiramisu. From a 3D printer? Come and see how the FOODINI from Natural Machines works. Visit us in Hall 11.0 booth b32. https://buff.ly/3fSKSp9

Wanna grow your business with additive? We have many success stories where innovators made their way from their first idea to a final product. Come to our booth and discuss what is in for you. Meet us at formnext hall 11 booth b32.

You can find more information on our website 👉 https://buff.ly/3fSKSp9

The team around the AM project AEROFLOAT aims to enable the printing of an aerostatic bearing. With the support of the supplier KOMETA TECHNOLOGIES, the production of metallic aerostatic porous bearings is to be ensured thanks to the new possibilities of Cold Spray Additive Manufacturing (CSAM) technology.

Read about the challenges the team is facing and discuss them with us. https://buff.ly/3SCYxhf

AMable aims to support SMEs towards certification through a set of targeted services - from the business idea to materials, certification support and the final simulation process. Our experts understand the difficulties in the AM area and with the AM certification knowledge support help is there such as mapping out supply chain and manufacturing chain requirements, workshops and trainings, assessments and review of current quality assurance practices.

Would you like to know more about how our AMable support can help you? https://buff.ly/3C2ucQY

Increasing the efficiency of exhaust gas cleaning systems by manufacturing microwaved structures - that is the aim of Daphne Technology. The team evaluates and analyses wires against their pollutant removal efficiency. With our support, solutions to emerging challenges and problems are developed, e.g. which formats and performances are possible with the help of AM.

Find out more on our website about current projects we are involved in. https://buff.ly/3CgHtsE

Advanced and efficient production of strong and highly conductive connections of 2D and 3D structures - this is what the ADIESSN project wants to achieve. However, a feasibility study must first show to what extent this is possible. In doing so, they have to overcome some challenges, namely developing a method and material that can withstand 3D printing using silver-containing filaments.

https://buff.ly/3dSBP6M

With our post-processing service and technologies, we want to make it as easy as possible for SMEs to get as close as possible to the specifications for the AM parts. This service is one of the last steps to go through in the process. Therefore, this step often includes the final touches such as surface smoothing, cosmetic surface treatments for general aspects.

Do you also need support with your project and product? Then get in touch with us. You can find out how to reach us on our website. https://buff.ly/3BOpmc9

Documenting the existence of your data without showing your data can be quite difficult, but with our AMable Blockchain it's as easy as a mouse click. Our AMable Blockchain technology allows you to create a digital fingerprint of your data on premise.

On our website, you can find out more about the digital data chain. https://buff.ly/3Dno884

The team around the project PLAFLYADD has set itself the goal to produce flying parts built with polymers additives technologies. The idea for this project came up because in commercial aircraft, there are a number of non-structural parts that are required for several functions. With the use of additive manufacturing features like weight, cost or volume can be reduced to a minimal amount.

But with every project, there are some challenges that have to be overcome. Read more on our website. https://buff.ly/3UIFdl7

Ulia Pharma's 3DPILL project deals with the feasibility of a 3D printer for medicines based on a dispensing technique. Ulia Pharma aims to develop a first compact, automatic and economical machine that will enable the production of tablets with customised active ingredients.

Challenges they have to face are that the system has to work at low temperatures and biocompatible materials have to be compatible.

AMable Experiment 3DPILL 3DPILL achieved an innovative solution by 3D printing. Check out how the support from AMable helped them to achieve their goal. AMable has received funding f...

Don't miss out on Formnext 2022 taking place from November 15th to 18th in Frankfurt am Main. Formnext is an international meeting platform for additive manufacturing and industrial 3D printing. You can expect high-caliber talks by industry experts, special areas and much more. The event will be held remote and in-house. Get more information and your ticket on our website. https://buff.ly/3Cdacyy

28.09.2022

Find out in our today's interview, AMable was able to help around the project of SINTAG. The team has invented an alternative system for powder recoating. The powder is used for selective multi-material powder deposition technology to mask chemical markings on AM parts.

You can find the interview on our YouTube channel

➡️

AMable Experiment SINTAG SINTAG achieved an innovative solution by 3D printing. Check out how the support from AMable helped them to achieve their goal. AMable has received funding f...

Today we present the AMSINTERACT project. The team around the project is building a photocatalytic reactor for NOx treatment of sintered gas using AM.

The aim is to find an efficient and innovative solution for heavy industry to treat and remove residual gases.

If you would like to read more about this and other projects, please visit our website. https://buff.ly/3R4XVkb

The proper usage of data is essential to gather important information for your business. Our service provides you with tools to extract meaningful knowledge and therefore enables SMEs to take qualified AM technology and process/product quality related decisions faster. From data pre-processing to data visualization.

Get in contact with us for more information. ➡️ https://buff.ly/3PKnYMI

On our website, we provide you with publications under the Downloads section. On it, you will find the Booklet "Training Material". It will provide you with an overview on additive manufacturing technologies and their associated application areas.

Besides English, the document is available in Portuguese, Greek, Finnish, Spanish, Polish, Italian, Dutch. Download it here: https://buff.ly/3CtnwPL

In today's interview, you can find out how the team around I-HEMAM was able to find a solution for their challenges. The project itself rethinks heat exchangers and created them in lighter weight and smaller size.

Let's check out our YouTube Channel for more information.
➡️ https://buff.ly/3TfSKQg

AMable Exepriment IHEMAM IHEMAM achieved an innovative solution by 3D printing. Check out how the support from AMable helped them to achieve their goal. AMable has received funding f...

Our AMable experts support SMEs in all AM matters. This also includes the implementation of computer-aided solutions that are used for the result-generating simulations. With this service, we want to reduce costs and time for SMEs as much as possible, which trial and error methods entail.

If you and your SME are in the process of carrying out simulations and experiments on your AM product idea, please contact us. We will help you find an efficient solution!

➡️https://buff.ly/3QLc6eI

The idea behind NAMAC-II was already set when the team behind the project approached us. Our task was to optimise the technology in design, weight and performance.

The product idea behind NAMAC comprises components for hydraulic hand tools manufactured with AM. These newly manufactured hand tools are to be incorporated into https://buff.ly/3PJY8Ir tools.

Do you want to find out more about how AMable can help SMEs? Then check out our website! ➡️ https://buff.ly/3PKk1HJ