DWA Trading For Commercial Agencies and Lab Supplies

The CanNeed-TT-200 Digital Torque Tester are specially designed for testing the cap closing and opening torque value of the bottled products. Its excellent performance makes it the industrial standard.
Technical data:
􀁺 Measuring range A : from 00.00 to 99.00 inch.Lbs
􀁺 In High-accuracy mode: from 0.000 to 4.500 inch.Lbs
􀁺 Accuracy:± 0.5 % of the full scale
􀁺 Units available : Kgf.cm / Inch.lbs / daN.cm / N.cm / N.m

Dwa trading inspection devices # Pet bottle range #

The “CPG-200 Canners Pressure Gauge” is for measuring the inner pressure of the beverage or other
containers.
Technical data:
Measure range: 0 – 0.1 Mpa (other range by order)
Accuracy: ±2.5%

DWA Trading #
Can Need inspection devices # PET # Canmaking #

DWA For Trading

The CanNeed “ FWG-200-D,Flange Width Gauge” is used to measure the fl**ge width of empty cans. Reliable design, invariableness measuring pressure and measuring angle
which enable the inexperienced operators can also perform the measurement accurately.

Technical data:
Measurement range : 0-4mm
Resolution : 0.01mm
Dwa Packaging #
CanNeed Inspection Devices #

The “CLT-100 Leak Tester for can “is used for checking the leakage of 3-piece cans in a water bath. It can test one can in each test.
The test procedure is performed semi-automatically and the CLT-100 is suitable for different
sizes of round 3-piece cans.
Technical data (changes reserved):
Max. Working pressure : 0.4 Mpa (4 bar)
Sample diameter : 65-170mm (bigger by order)
Max. can height : 200 mm (custom made up to 300mm)
Bath dimensions : 500 x 400 x 260 mm (W x D x H)
Dimensions : 590 x 420 x 480 mm(W x D x H)
Weight : 30 kg

#

CanNeed-DER-400 Digital Enamel Rater is used to detect the exposed metal position more easily compare to the former models.

Technical Specifications (changes reserved):
Sample type : 2- and 3-piece cans, aerosol-cans
and different kinds of ends
Range : 0 to 500 mA
Resolution : 0.01mA
Accuracy : ± 2%
Power supply : AC115 V/230V to DC9V
Rear Panel : RS232 serial output
Can holder Dimensions : 210 x 228 x 250 mm (W x L x H)
Configuration:

The CSS-2000 Seam saw is a special seam circular saw with double cut for double seam
inspections that is needed for any type of can seam inspection used along with our seam sight
device for 2-piece and 3-piece cans.

Technical data (changes reserved):
Sample can dia. : 45-260 mm (Bigger by ordering)
Sample type : 2- and 3-piece cans
Saw blades : 100 x 22 x 0,5 mm
Speed : approx. 1.000 r/min.
Power supply : 200 V
Power : 100 W
Dimensions : L370 x W340 x H200 mm
Weight : 20kg

Can need devices #
saw

Can Seaming inspection made easy, clear and time-saving
using our SeamSight-C device used for checking on can overlap.

Technical data (changes reserved):
Power supply : USB port of PC
Serial interface : RS 232 C
Resolution : 0.001mm
Accuracy : 0.005 mm
Magnification factor : 60 X
Line positioning magnification factor : 180 X
Languages : Chinese/English/French/Italian
Cans dia. : 52-200 mm, customized made up to 300
Dimensions : 400 x 200 x 150 mm(W x D x H)
Net Weight : 6 kg

Dwa Packaging #
CanNeed Inspection devices #

DWA For Trading

T&S Cosmetics

Afia Lab

Cupboards

ARMA Labs

Johnson & Johnson Lab