Howard Marshall Engineering Ltd
Howard Marshall Engineering Ltd. offers engineering solutions to manufacturers, dealers and operator
The pull out gun drawer with drinks cabinet attracted a lot of interest at Lamma 24…
One of four cracking John Deere Gator’s fitted with top of the range HME accessories supporting the Chatsworth Country Fair this weekend..
They look great…
Thank you for your business..!
So many positive things have been happening at the club over these past few weeks;
1. Just look at our pitches - just over three weeks ago they were looking a little bit sad, but with a lot of hard work they now look amazing.. A HUGE thank you must go to Howard Marshall Engineering Ltd and his team.
2. A Delivery of outdoor furniture to be used whilst the clubhouse undergoes a major refurbishment. Thank you to Duane at Broddell Construction for the furniture and Oli at CF Storage - Combs Farm Ltd for the transport, members of the Senior team & Board and the girl's parents for helping with the loading and unloading.
3. New fridges arrived for the bar ready for the new season.
4. And finally, as you have seen from Graham Turner's recent email, we are finally ready to start the BIG build to give us some much-needed improved changing facilities.
We really do have some amazing volunteers who give up lots of their time to make sure we all have the best facilities we can.
Many thanks for your ongoing business… Team HME
Looks great, many thanks for your ongoing business.. Team HME..
After a successful LAMMA show our focus turns to the BTME show in Harrogate, where we will be displaying the range of Golfco competition rollers.
We look forward to seeing you all there.
HME & BEMA Sweepers are at the LAMMA show again this year showcasing a wide range of our products. If you are attending, come and pay us a visit 😊
Hall 20, Stand 20.320
Going away for the evening?…we’ll just drop this Stunning 2023 Polaris Diesel Ranger off on the way and leave the trailer at the customers to collect with the Part Exchange tomorrow 👍
(wait till you see it in the daylight…mercy, mercy, Uncle Percy…The new HME rear canopy is the Mutts Nutts!)

Polaris Off Road
Howard Marshall Engineering Ltd
We are very happy to be supporting the event crew with our utility vehicles..
LAMMA is celebrating its 40th show in the New Year, and we will be there with Bema Sweepers to mark the occasion. If you're going to the NEC on 11 or 12 January, make sure you come and say hello! We will be in Hall 20 Stand 20.320
Did you know that we have over 130,000 different spare parts in stock? We have parts from most leading brands available:
• Witham Oils
• Wiedenmann
• Trimax
• Sparex
• Kramp
• John Deere
• Granit
• Gates Hose
• Flemming
• Vapormatic
If you need a part, we offer next day dispatch or to arrange to pop-in in person, email [email protected]
It's time for another short trip to earlier in the year when we bespoke manufactured this solution for Dealer Henton & Chattell. This John Deere 3045R is fitted with our bale grab and a specialist adapter to enable the grab to handle root balled trees on landscaping projects. We have also supplied a bespoke rear transport box to support the trees during transit.
We've just fulfilled an order for several of our Striping Rollers which fit on the rear of the John Deere X950R. The rollers are hydraulically raised and lowered in unison with the deck, this innovative design means there's no new switch work to be done. The zinc-plated steel roller matches the X950R perfectly and we offer both a 54” and 48” widths to match your deck. They've proved very popular since we launched them in the summer, and if you'd like to know more about them just give us a call on 0115 9630011 or email [email protected]
Entrepreneurship runs in the Marshall family! Alex Marshall set up during the lockdown, and we're delighted to see it going from strength to strength! Check out their page for more details.
With winter just around the corner, it's good to know that we have a variety of Snow Blades in stock! We offer two different sizes and two different mounting options - loader and bolt-on to the chassis with width options of 60 or 72 inch. Make sure to get hold of one before the snow arrives. Just call 01159 630011!
We will remember them.
The HME livestock canopy still allows you to access the engine for maintenance by tipping the bed with it still attached. This also allows you to tip the bed to pour out loose material stored inside the canopy too!
When we designed our livestock canopy, we thought about the fine detail and how to make it really user-friendly. That's why we fitted slam lock bolts to the zinc-plated doors, which means the doors latch themselves when pushed into position.
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Website
Address
Nottingham
NG158FG
Opening Hours
Monday | 7:30am - 5pm |
Tuesday | 7:30am - 5pm |
Wednesday | 7:30am - 5pm |
Thursday | 7:30am - 5pm |
Friday | 7:30am - 5pm |
Nottingham, NG72SB
Foresight Innovations Ltd focus on developing industry leading composite material technologies. Our
Nottingham, NG177LF
Metalcraft Group are an innovative company specialising in manufacture and industrial supplies
Unit 10 Prospect Court Nunn Close
Nottingham, NG172HW
Nationwide Forklift battery and charger services, From Brand new battery sales to small repairs. With great products, Low costs and over 30+ years experience.
Harris House Moorbridge Road East
Nottingham, NG138GG
Transformative Sustainable Engineering
Riverside Way
Nottingham, NG21DP
Bridgeway Consulting Ltd is one of the leading consulting and contracting companies in the UK today, covering many aspects of civil engineering and asset management. We always aim ...
62 Mansfield Lane, Calverton, East Midlands
Nottingham, NG146HL
Over 35 years experience supplying, fitting, repairing and calibrating hydraulic vehicle lifts, brake testers, MOT stations, and all types of garage equipment
Nottingham
Our company provides a world wide service for the Er****on & dismantle of Rides & Attractions
Clifton
Nottingham, NG118EZ
Carrying out steel and fabrication work from gates, railings, balconies, staircases, fire escapes etc
Abbot Street, Awsworth
Nottingham, NG162QJ
Installation,Repairs,Service And Maintenance On Roller Shutter Doors,Over Head Sectional Doors,Domes