Salter civil engineering

Well after 6 years of being a temp driver on the sticks, I’ve finally handed down my machine 🥹. Good luck Mark at the sticks, hope you get the hang of the tiltrotator quickly 😂 enjoy mate.

🚨Plant hire🚨

Did you know Salter civil engineering also do plant hire! We have some plant available at the moment due to short notice off hire, no circumstances of our own!
2x 14t excavator with or without operator
10t dumper
2x 9t dumper
6t swivel dumper
138 bomag ride on roller


Do not hesitate to get in touch
Craig 07584076500
Shaun 07983739083

Our 8t excavator went out on hire this morning with operator to a new costumer.

That’s it for 2022!! What a year it’s been. What we thought was going to be a steady year, and us both saying we’re not buying anything this year. Well that turned out to be no truth in that 🤣. Our plant was sure in high demand, adding a couple more 14t excavators, and a hand full of dumpers ranging from 3t-10t. Roll on next year to see what that brings👍. Thank you to all our customers, It’s much appreciated .

Merry Christmas & a happy new year to everyone 🍻

Happy birthday to us. 5 whole years of me and Shaun working non stop to achieve what we’ve got today. It certainly hasn’t happened over night. We started off with nothing, just the work ethic saying we can do this. no 9-5 job. Going to work most days at 6 in the morning. And still working pass 10/11 at night. thank you to everyone who has supported us over the years It’s much appreciated. Here’s to the next 5 years.

New toy!

Salter civil engineering still investing in new attachments, to get the best out of the machines. This time we’ve gone for a SMP tiltrotator. Thanks to Molson Equipment Matthew Jon Wilson for the great service once again. more pictures to follow, as we needed a rubber dinghy today, rather then a machine! 😂⛈️🛶🛟

Another 10t dumper added to the growing fleet. This time a NC ST10. Delivered early this morning, so we could put it straight to work👍

Salter Civil Engineering take delivery of another sk140 sr. to keep up with demand of work load. Another great service from Molson group. Thanks to Matthew Jon Wilson for the quick turnaround

Templecombe

Reinforced Substation

The lads cracked on with this one. Based poured, lads then finished off the shuttering ready for the next pour. All done and shutters stripped ready for handover. 👍

Templecombe

Reinforced Substation

Lads have been busy this week! Reduce dug, and stoned up ready for the shuttering to be landed. The lads cracking on with the shuttering, all done in house. Then on with the steel fixing, no tie wire allowed on this one, all had to be welded. Ready for the base to be poured Monday morning, so we can finish off the rest of the shuttering for the next pour.

Templecombe

Pumping station

Due to design change, we had to go back to the pumping station to install an additional storage tank to up the capacity. Didn’t have the time to order precast for this one, so traditional was the way forward. A nice 5m dig again, with plenty of rock and water to contend with. Base poured yesterday, giving us a good go at it today. Holes core drill and pipe installed this morning, then backfilled and compacted in layers. Fair play to the lads for getting this one done so quickly. So we can get on with the next job 👍

Templecombe

3 headwalls install yesterday by the team. The pond is now ready for topsoil.

Templecombe

Work started on the pumping station middle of last week. Finally got it all installed today, turned out to be a tricky one. At its deepest we were 7m in the ground, with just over 3m of rock to break through to get there. With plenty of water making it’s way in. All pumping station was precast, so was dealing with some proper weight. The heaviest section weighing in at 10t. But fair play to the lads, all stuck at it through the sun and the rain. To get the job done. Now ready to hand over to the pumping company, to finish there install. So we can pour the concrete slab. 👍

Phase 2 Templecombe

Tarmac finally down, giving a nice clean access to phase 2.
Little change for us, was meant to be doing the head walls. But been asked to make a start on the pumping station. With a lovely depth of 6 meters.

Salter civil engineering will be taking delivery of this excavator on Monday morning. This time a Kobelco sk140sr to add to the forever growing fleet. Big thanks to Matthew Jon Wilson , Simon Bradfield for getting this one over the line👍

Phase 2 Templecombe

That’s another road complete ready for tarmac. Fair play to the lads, smashed the work out to meet deadline with 3 days to spare! Next project headwalls, bring it on 👍

Templecombe phase 2

The lads smashing out the work at the moment, 250m of sacrificial blocks in today. 💪

Phase 2 Templecombe

Last manhole built leaving phase 1 going into phase 2. All perfect manhole from now on. That’s the last of the concrete pipes in at templecombe. All the lads working hard to meet a tight deadline. Road formation now coming along, with capping going down and type1 rolling in.

Salter civil engineering now have S100 pump available for hire

Salter civil engineering take delivery of another set of fork attachment. With 65mm pins and 80mm pins. So can be fitted to 13t to 20t machine.

Salter&Willis Civil and groundwork’s are pleased to say, we have secured the full groundwork package on another new contract with another new client. With this superb 7 house site. Can’t wait to start breaking ground on this one. Salter civil engineering working closely with us, supplying all small plant & plant machinery. #

Due to increasing and on going works, we are currently on the look out for a machine driver,groundworker and labourer, on going works across the southwest, cscs,cpcs or npros tickets required.
Pay negotiable depending on experience,
Please email [email protected]
Phone.
Shaun 07983 739083
Craig 07584 076500
Richard 07803 840754

Salter civil engineering worked closely with Salter&Willis Civil and Groundwork’s Ltd to get this job over the line, by supplying all hand held power tools, and all plant machinery.

1 tonne high lift dumper going back on long term hire as well with diesel reversible wacker plate.
#2022