HolyBro

The Holybro M10, M9N, F9P and Matek M10Q GPS was put to an ultimate test to determine which GPS units could keep pace with a high-speed drone in acro mode while ensuring precision during RTL and autonomous missions.

Find out more here: https://discuss.ardupilot.org/t/the-great-gps-showdown-speed-precision-and-a-few-surprises/122661

📢 Introducing the H-RTK ZED-F9P Rover

Product Link: https://holybro.com/products/h-rtk-zed-f9p-rover

🔧 Advanced GNSS Receiver:
Equipped with the high-precision u-blox ZED-F9P GNSS receiver, providing superior accuracy and reliability for critical applications.

🧭 Integrated RM3100 Compass:
Delivers accurate orientation and stability, ensuring exceptional performance even in challenging environments.

📡 High-Gain Antenna:
Features an integrated large, high-gain dual-band stacked patch antenna that enhances signal reception across multiple GNSS frequencies.

💪 Durable Design:
IP66-rated for robust protection against dust and water, making it ideal for use in harsh environmental conditions.

🎛️ Advanced Filtering & Amplification:
Utilizes a Hybrid Coupler + SAW + LNA + Hybrid Coupler architecture, ensuring superior signal clarity and effective interference rejection.

🛡️ Robust EMI Shielding:
Minimizes the impact of electromagnetic interference, ensuring consistent signal integrity and reliable operation.

🛠️ Versatile Installation:
Designed for easy mounting on a flat surface or with an elevated mount, allowing for optimal positioning and flexibility in various setups.

🚁 DroneCAN Option:
Includes MCU, IMU, barometer, and robust communication capabilities, tailored for advanced UAV systems requiring high performance and reliability.

We are thrilled to announce the release of the Pixhawk Baseboard v2A & v2B, an upgrade from the v1. This new version comes with several enhancements designed to improve performance, reliability, and ease of integration.

More info: https://holybro.com/products/pixhawk-6x

🔧 Smaller and More Compact Design: The overall footprint of the board has been reduced, making it easier to integrate into various applications.

🛡️ New Robust Pin Header Design: We’ve introduced an improved pin header housing for greater reliability in the most demanding environments.

⚙️ Added PWM Level Shifter: Now, PWM output signal levels can be switched from 3.3V to 5V via a resistor, offering more flexibility in your setups.

💪 Change to Aluminum CNC Case: Our new high-quality aluminum CNC outer case ensures durability, efficient heat dissipation, corrosion resistance, aesthetic appeal, and EMI shielding.

📏 Two Models Available: With Model A and Model B, each featuring a pin header facing different directions, you get more flexibility in installation.

🚀 Introducing the Holybro PM08-CAN Power Module! 🚀

Supports up to 14S batteries with a continuous current of 200A. Compact design with DroneCAN Protocol. Two 5V Output with Independent BEC IC and Circuitry. Separated sensor and BEC PCB Board to minimize electrical noise interference. Featuring a highly accurate, hall-effect-based, galvanically isolated current sensor, qualified to automotive AEC-Q100 Grade 1 standards.

More Info: https://holybro.com/products/dronecan-pm08-power-module-14s-200a

Another batch of the new Pixhawk 6X version tested and ready to ship!

All our products undergo rigorous aging and functional testing to ensure they meet the highest standards of quality and reliability.

We are thrilled to announce that we have significantly reduced the prices of our most popular products, including the Pixhawk 6C Series, F9P Series, Kakute H7 Series, and more.

This price drop is due to several key factors, most notably the steady decline in component costs following the resolution of the global chip shortage. We understand the challenges you have faced over the past few years with supply chain disruptions and increased costs. As conditions have improved, we are committed to passing these savings on to you, making our high-quality products even more accessible and affordable.

This price reduction is part of our ongoing effort to provide exceptional value and support to our customers. We believe these new prices will help you continue innovating and achieving your goals with our products.

Product Links
Pixhawk 6C: https://holybro.com/products/pixhawk-6c
Pixhawk 6C Mini: https://holybro.com/products/pixhawk-6c-mini
RTK Series: https://holybro.com/collections/h-rtk-gps
M9N: https://holybro.com/collections/gps
Kakute H7: https://holybro.com/products/kakute-h7
Kakute H743 WIng: https://holybro.com/products/kakute-h743-wing

Introducing an all new sensor set for the Pixhawk 6X!

With Triple ICM-45686 IMU sensors (±32g) BalancedGyro™ technology, ICP20100 & BMP388 Barometer, BMM150 Magnetometer and Ethernet Support.

Product Link: https://holybro.com/products/pixhawk-6x

Supported in: PX4 1.14.3 & Ardupilot 4.5.0 and later.

Amazing first day in the UAS Expo Shenzhen, if you are here, make sure you come visit us at booth 1B167!

If you are in Shenzhen and coming to the UAS Expo, be sure to visit us at our booth!

Introducing the Pixhawk Jetson Baseboard, it combines the power of Pixhawk & Nvidia Jetson in a small form factor.

The Jetson & Autopilot are connected via UART, CAN, and Ethernet Switch. It comes with 2x M.2 Key for Wifi/Bluetooth & NVMe SSD, and follows the Pixhawk Autopilot Bus Open Standard.

Product Page: https://holybro.com/products/pixhawk-jetson-baseboard

The Pixhawk 6X and Pixhawk 6X Pro follows the Pixhawk Autopilot Bus (PAB) Community Driven Open Standards. This allow you to use our Pixhawk with any PAB compliant carrier/baseboard. You can either use the baseboard we manufacture or customize your very own.

For more information about Pixhawk Standard, see https://pixhawk.org/ & Dronecode Foundation

This exploded diagram shows the internal architecture of the Pixhawk 6X Pro. It has a high grade ADIS 16470 IMU (±40 g), and a all-new vibration isolation system with custom-formulated isolation material for optimal IMU damping characteristics and superior durability.

Product Page: https://holybro.com/products/pixhawk-6x-pro
Vibration testing blog: https://discuss.ardupilot.org/t/introducing-the-holybro-pixhawk-6x-pro/116398

Introducing the Pixhawk 6X Pro. It has a high-performance ADIS16470 Industrial IMU with a high accelerometer dynamic range (±40 g).

All new IMU vibration isolation material with a resonance frequency in the higher spectrum, and optimized IMU damping characteristics and durability.

More information: https://holybro.com/products/pixhawk-6x-pro

That's a wrap for XPONENTIAL 2024 San Diego!

Introducing the Kakute F722, a low-cost F7 flight controller for Betaflight and INAV. It has an ICM42688P gyroscope, 5V/2A and 9V/3A BEC, plug-and-play with the O3 Air Unit, and various ports for quick setup.

More information: https://holybro.com/products/kakute-f722.

Introducing the Holybro mosaic-H. This is a cutting-edge RTK GPS module that harnesses the power of Septentrio's elite mosaic-H GNSS receiver. It is packed with versatile features such as effortless configuration, spectrum analysis, data logging, and post-processing for a wide range of applications.

With its dual-antenna input, mosaic-H can provide compass-less YAW information to the autopilot and eliminate the inaccuracies caused by magnetic interference.

More info: https://holybro.com/products/h-rtk-mosaic

Due to popular demand, we're thrilled to announce that the Pixhawk 4 is back in stock and available to be purchased!

Purchase Link:

Pixhawk 4 Pixhawk​®​ 4 is a advanced Autopilot flight controller that is supported in PX4 and Ardupilot since 2018. It features advanced technology from STMicroelectronics​®,​ Bosch®​​, InvenSense®​,​ delivering incredible performance, flexibility, and reliability for controlling any auton...

The Pixhawk Rasberry Pi CM4 Baseboard allows users to combine the Pixhawk 6X module with the Raspberry Pi CM4 companion computer in on compact form factor with all the connections you need for development.

More Info: https://holybro.com/products/pixhawk-rpi-cm4-baseboard

Here is a VTOL Fixed-Wing sample wiring diagram with the Holybro Pixhawk 6X and Dual Antenna H-RTK Unicore UM982 GPS. This dual-antenna GPS allows the UAV to calculate heading/yaw with the GPS in setup or situations with high magnetic interference.

More Info
Pixhawk 6X: https://holybro.com/products/pixhawk-6x
H-RTK Unicore UM982: https://holybro.com/products/h-rtk-unicore-um982
Microhard Telemetry: https://holybro.com/products/microhard-radio
DonreCAN RM3100 Compass: https://holybro.com/products/dronecan-rm3100-compass

Here is a sample wiring diagram for the Holybro Pixhawk 6X Autopilot Flight Controller.

Getting new batch of Kakute G4 AIO tested!

H-RTK F9P Ultralight is an ultra-lightweight (21 gram) RTK GNSS module with U-blox ZED-F9P, an IST8310 compass, and an integrated helical antenna.

It is designed specifically for weight-conscious applications where every gram counts.

More info: https://holybro.com/products/h-rtk-f9p-ultralight

Introducing the Kakute G4 AIO FC w/ 35A ESC (AM32). It is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power.

It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX, and 35A 4in1 ESC, all in a small form factor weighing only 7.5g.

More Info: https://holybro.com/products/kakute-g4-aio-35a

PX4 Developer Summit 2023 was amazing, hope to see you next year. Dronecode Foundation PX4

💡 Highlights from in New Orleans: 45+ talks, international networking, and a dazzling drone show! 🎇 Big thanks to our community, speakers, and sponsors. 🌟 Catch the recap and sessions on our blog. https://hubs.la/Q028nPcx0

Digital Power Module PM08D is now available, rated for 200A continuous, up to 14S. Designed for Pixhawk 6X as it uses I2C protocol for voltage & Current data transmission. Two 5.2V power output port with independent circuits, BEC IC and circuitry that can provide redundant power to the flight controller. Perfect for high power application.

More Info: https://holybro.com/products/pm08d-digital-power-module-14s-200a

30° Antenna Mount of GPS for YAW (aka GPS Heading, moving baseline) is now available.

We are now pleased to announce that the price of the H-RTK Unicore UM982 has been significantly reduced, making this exceptional RTK even more accessible and affordable.

More Info:

H-RTK Unicore UM982 (Dual Antenna) The Holybro Unicore UM982 Dual Antenna RTK GPS provides high-precision positioning information and is capable of generating non-magnetometer moving baseline yaw determinations for autopilots.

We are now pleased to announce that the price of the H-RTK has been reduced, making these exceptional GPS even more affordable than before.

More info: https://holybro.com/collections/h-rtk-gps

Introducing the Holybro H-RTK F9P Ultralight!

This is an ultra-lightweight RTK GNSS module with U-blox ZED-F9P, an IST8310 compass, and an integrated helical antenna. It is designed specifically for weight-conscious applications where every gram counts.

Product Link: https://holybro.com/products/h-rtk-f9p-ultralight

Holybro RemoteID Module is a low-cost, small-size, and light-weight module that broadcasts information about UAVs in flight through WiFi and Bluetooth. There are options with an CNC case or without a case.

Please Note: This product is designed for the Standard Remote ID Solution, primarily targeting drone manufacturers and system integrators, as you need to do your own approval process at the FAA (DoC submission) if you are in the USA.

More Info: https://holybro.com/products/remote-id