Elite Crete Systems Jamaica

Before & After - A seamless HERMETIC™ Stout Floor installed in a warehouse. This slip-resistant protective floor coating is ultra-tough, chemical & abrasion resistant and a cost effective way to protect the concrete substrate.

Step by step before & after installation of a fluid-applied, protective floor coating in a warehouse.

Commercial Kitchen - Installation of a HERMETIC™ 4.8S Urethane Cement Floor with full flake broadcast. This new protective coating is thermal shock resistant, easy to clean & maintain, anti-microbial, slip resistant when wet and more cost effective than most people think.

Before & After - Permanent concrete restoration & repair using THIN-FINSIH™ Pre-Mixed Overlay. Believe it.

A simple, clean, durable and cost effective REFLECTOR™ Enhancer Floor installed in an Irish Pub & Restaurant.

Before & After - Removal of old VCT (vinyl composition tile) and replaced with a seamless, fluid-applied HERMETIC™ Flake Floor in a public school.

Installation of a seamless, fluid-applied protective floor coating.

Thermal shock resistant floors are capable of withstanding high temperature fluctuations you may experience when using forced steam to clean, or underneath a commercial kitchen oven. It also means that rapid temperature changes will not loosen the bond to the concrete.

HERMETIC™ 4.8S Urethane Cement Slurry is designed to protect concrete from thermal shock and hold up against rapid changes in floor surface temperature. Learn more about our urethane cements in the comment section below.

HYDROPHO™ CS14 is a 0 VOC, highly concentrated, silicate free, colloidal nano-silica densifier that creates new calcium silicate hydrates within the pore structure of concrete substantially improving: density, compressive strength, freeze thaw resistance and reduces dusting of new and existing concrete structures. Can be used on interior, polished or exterior concrete surfaces.

Another seamless, fluid-applied, protective floor coating installed for NASA - National Aeronautics and Space Administration at Kennedy Space Center Visitor Complex using our specialty engineered products.

Just a few examples of the floors that our engineered resinous products can create. We can teach "professional contractors" how to install these and more.

Find a Technical Office near you: www.elitecrete.com/locations

Before & After - Permanent concrete surface restoration using THIN-FINISH™ Pre-Mixed Overlay.

Prepare the surface, just add water, mix and apply. You cannot remove the coating without a pick ax or equipment or without damaging the concrete substrate below.

THIN-FINISH™ has been making real concrete finishers skeptical for over 25 years.

Parking garage deck resurfaced & restored with E100-PC2™ Coal Tar Epoxy increasing the lifespan 4 to 5 times that of conventional asphalt sealcoat emulsion.

www.elitecrete.com/wp-content/uploads/TD.499-Technical-Data-E100-PC2-Coal-Tar-Epoxy.pdf

Indoor basketball court has a HERMETIC™ Neat Floor installed.

HERMETIC™ 4.8S Urethane Cement installed in a commercial kitchen. These specialty floor coatings were engineered specifically for food & beverage environments and withstand high temperatures including forced steam cleaning.

BEFORE & AFTER - A flawless installation & example of a commercial kitchen floor restoration with HERMETIC™ 4.8S Urethane Cement.

Thermal shock resistant surfaces can withstand high temperature fluctuations, such as underneath ovens or where forced steam cleaning is used. It also means that temperature fluctuations will not cause a loosening of the bond to the concrete. Urethane cements are designed to protect concrete from thermal shock, as an alternative to epoxy coatings, which do not allow the proper transfer of heat.

Before & After - Concrete repair without replacement using THIN-FINISH™ & TEXTURE-PAVE™ Pre-Mixing Overlay. These polymer-modified, cementitious restoration products when properly installed are permanent solutions for situations shown below.

Installation of a HERMETIC™ Neat Floor in an industrial warehouse. These fluid-applied, protective floor coatings are ultra-durable, engineered for longevity and simple to clean & maintain.

A blue fluid-applied, protective floor coating installed in a marina showroom made to resemble water.

Specialty Floors for Fire, Rescue & EMS Facilities - This fire station had their apparatus bay floors restored & protected with an ultra-durable HERMETIC™ Stout Floor. This is not a thin "epoxy paint". 🚒 🚓 🚑

Another automotive service center has their floors restored & protected with a HERMETIC™ Stout Floor. This new coating is slip-resistance (even when wet), easy to clean, extremely durable & resistant to petrochemicals.

Our team from elitecreteireland oversaw the installation of a completely smooth & level HERMETIC™ Neat Floor for Virgin Media television studios. 🎥

Installation of a HERMETIC™ Neat Floor in a commercial automobile repair shop. These floors are not pretty but they are ultra-durable, resistant to petrochemicals and simple to maintain.

Before & After - Installation of a HERMETIC™ Neat fluid-applied, protective floor coating in an industrial warehouse.

Prep, Apply & Protect 💪

Before & After - Installation of an ESD (electrostatic dissipative) floor in a manufacturing facility.

Learn more about ESD floors & their purpose at: www.elitecrete.com/esd-electrostatic-dissipative

A few examples of REFLECTOR™ Enhancer Floors installed in retail environments.

Learn more about the application methods & products used at: www.elitecrete.com

Before & After - An automobile dealership service center had their floors restored & repaired with a HERMETIC™ Neat Floor.

Hefner Public Middle School had their old and failing VCT floors removed and replaced with a seamless REFLECTOR™ Enhancer Floor.

Installation of a HERMETIC™ Quartz Floor in a manufacturing facility to restore & protect the deteriorating concrete surface. Imagine having to tear out & replace an existing concrete floor.

Durability Matters

REFLECTOR™ Enhancer Floor installed at the University of Memphis for the Memphis Tigers athletic department.

Installation of a HERMETIC™ Neat fluid-applied, protective floor coating in a warehouse & manufacturing facility.

Protect Your Concrete.

BEFORE & AFTER - Oil change center had their old & failing "epoxy paint" floor repaired & restored with a new, ultra-durable HERMETIC™ Neat protective floor coating.

Durability & Cost Effectiveness Matters.

The architect for this Honda automobile museum specified a seamless, fluid-applied REFLECTOR™ Enhancer Floor for their remodel.

Contact us to learn more or how to install these unique flooring systems.

Automobile oil change center had their floors restored and protected with a HERMETIC™ Stout Floor. This fluid-applied, protective coating is extremely durable, abrasion resistant and withstands deterioration & stains from petrochemicals.

Excellent work by: Dornbrook-Concrete-Coatings

VCT (vinyl composition tile) was removed and a seamless, fluid-applied protective floor coating was installed in this public school. This new floor is anti-microbial, ultra durable, easy to clean, slip resistant (even when wet) and just as cost effective for large spaces.

Contact us for more information about these unique flooring systems.

Architects, specifiers & general contractors know that we are here to help them understand and specify the correct flooring systems or surfaces to meet their client’s specific requirements. These flooring systems are specialty engineered for various applications including interior or exterior surfaces, vertical wall coatings, restoration projects, secondary containment systems and more.

Find our 3-Part Specifications on Sweets Products at: https://sweets.construction.com/SearchResults/Internal/Manufacturer-Elite-Crete-Systems-