Ever Glorious Electric Co.,Ltd
Ever Glorious Electric Co., LTD (Abbreviated as EGE) is an officially registered local trading compa
Coordindined: Terminal 3, Yangon International Airport
Dated and time: 05:00 AM
It's time for all people reunion and fight against CoronaVirus # -19 #
For supporting the local utility in Kachin State against the Virus, we're glad and honored to donate our HQ invested CoVid-19 IgM Antibody Testing Kits, as well as disposable facial masks.
This is the first light from YGN to MTN, since the Trafic Control Policy, due to the CoVid-19 Pandemic. All epidemic prevention stuff will be delivered in this first time.
SAFE AND STRONG, WE'RE ALL TOGETHER! #
66KV/115KV/132KV HV high voltage single/three phase oil immersed shunt reactor
The 66KV/115KV/132KV oil immersed shunt reactor manufactured by us has following advantages: reasonable structure, reliable insulation, low loss, low PD, low temperature rise and low noise level, strong short-circuit withstand ability, strong lighting impulse withstand ability and no leakage etc.
Happy Tazaungdaing to everyone who's enjoying the sacred and harmonious days!
Wish all the lights always brightening the way ahead.
Mingarlabar! From EGE Team
When you keep your always open on ASEAN, you will be impressed on their Energy Sector.
Energy sources are there, where more Financial Investment and Technological Introduction shall be brought in, for better improvement of regional economies and social cultivation.
Five Differences Between Air Insulated Substations and Gas Insulated Substations ?
The differences between air insulated substation engineering and gas insulated substation engineering are vast. There are five major considerations in the differences between the two high voltage substations: their construction, installation, operation, ongoing maintenance and total cost of ownership.
We’ll look comparatively at each of those five substation differences below :
Construction
GIS high voltage substation engineering uses the gas sulfur hexafluoride for insulation, whereas AIS uses air insulation in a metal-clad system. Sulfur hexafluoride is five times heavier than air and offers excellent extinction behavior. Another significant construction-based difference between the two switchyards is that a metal-clad AIS uses three-position draw-out circuit breakers (on, off and test). GIS systems use fixed, mounted circuit breakers. The sealed mounted breakers are a ‘sealed-for-life’ technology, whereas the AIS breaker can be removed for maintenance and troubleshooting.
Installation
Installing a GIS high voltage substation can be faster than installing its metal-clad AIS counterpart. This is largely due to the fact that GIS systems are significantly smaller and weigh less (despite the gas weighing more than air). Provided the technician doesn’t need to handle the gas itself, GIS substations are quicker to install. AIS systems need busbar connections and boots on the switchgear. The average installation time is reduced by approximately 30% with a GIS installation (when no gas-handling is required). GIS systems also take up less space than AIS. The physical footprint of a GIS is about 35% less than AIS.
Operation
GIS systems are significantly easier to care for on a regular basis as they offer front instead of rear access. They also contain their own integrated testing instruments.
Arc flashes are rare in GIS because all the interior elements are insulated, with only the cable compartment being accessible. As the parts are fully insulated, no cables or linkage can come in contact with the live parts.
Maintenance
As discussed in point one, GIS switchyards require significantly less maintenance. On average, GIS systems need only be visually inspected every four years or more, depending on the specific manufacturer recommendation for your device. GIS drives only need to be re-greased after about 20 years (again, this varies between manufacturers).
AIS systems should be visually inspected every year to two years (again, based on the specific manufacturer recommendation). When inspected, all compartments must be checked, unlike GIS where the individual compartments and elements are fully insulated and can be monitored. On average, an AIS breaker will need about four hours of maintenance for each two-year period.
In terms of maintenance, AIS systems require significantly more effort, especially due to the thoroughness of the inspections. Inspections include having a technician torque, draw-out, clean, lubricate and vacuum the unit. They also need to be checked for visual signs of copper corrosion, something that doesn’t occur in GIS due to the units being sealed. That sealing also protects the components from environmental damage.
Total Cost of Ownership
On a high-level comparison of AIS and GIS switchgear, you need to weigh the upfront costs against the required lifelong maintenance. These units generally have a 30-year minimum life span. GIS units tend to cost between 10% to 40% more than AIS.
In summary, AIS systems offer upfront cost savings, however they require more man-hours over the long run. GIS high voltage substations’ advanced electrical engineering requires a larger upfront investment, but their sealed technology means lower installation and maintenance costs.
Any suggestions and enquiries to us
09 409109529
[email protected]
No.291(A), Cheery Garden, Cherry (3) Road, FMI City, Hlaing Thar Yar, Yangon
#
🧐Sectionalizer Definition🧐
A sectionalizer is an automated switching device that is intended to isolate faults, and will recognize a permanent fault and open while the upstream recloser is open, after a predetermined number of counts within a set time-period.
🤓Key Note🤓 A sectionalizer is not designed or intended to interrupt fault current, which means it doesn't have time-current characteristics.
💪Sectionalizer Advantages💪
🤙Determine whether the fault is temporary or permanent.
🤙correctly locate and automatically isolate faults, and recover power supply in non-fault area.
🤙Free from external power supply (PT).
🤙Without Protection Dead Zone.
🤙Accessible for load switch function, switching load current via load breaking tool.
🤙Transmit fault info. to handphone or background.
🤙Maintenance free.
👇For more informatin, please feel free to contact us!🤝
📲09409109529
📩[email protected]
Ever Glorious Electric Co., LTD is a trading company.Our company can supply the goods and technological service for electric power with good quality and competitive price. Our Company can supply list of electrical equipment are below;
(1)Switchgear Products
(2)Transformer Products
(3) Switch Panels
(4) Automation Products
(5)Cables .
We are responsibility distributer with world standard brand from EU and China to Myanmar .If you want to detail of our products , You can contact to us .
Our address
Contact info
- 📩[email protected]
- ☎️+959409109529
- 🏢No. CA291A,Cherry Garden,Cherry(3) FMI City, Hlaing Thar Yar,Yangon, Myanmar.
Photo from internet - credit uploader
Ever Glorious Electric Co., LTD (Abbreviated as EGE) is an officially registered local trading company, who is engaged in offering goods supply and technological service for electric power and energy sector, with good quality and competitive price. As the trustworthy partnership of major equipment and materials manufactures in China and EU, more than dozens of factories are acted for by EGE.
EGE’s business offers a wide range of products and services in energy and electricity sector including Power Transmission and Distribution (T&D), LNG-fired generating solutions, lubricants and greases supply, which help customers to improve productivity, save energy, and improve quality.
Our company aims to introduce advanced equipment, materials, instrumentations and technology from all over the world to Myanmar, for keeping pace with the development of Myanmar Economy, especially in Electricity improvement. Besides, we offer procurement and technology agency services to consumers and engineering companies, including equipment and materials supply, urging delivery and transport, carrying out tests and after-sale service and etc.
Contact info
- 📩[email protected]
- ☎️+959409109529
- 🏢No. CA291A,Cherry Garden,Cherry(3) FMI City, Hlaing Thar Yar,Yangon, Myanmar.
Click here to claim your Sponsored Listing.
Contact the business
Telephone
Website
Address
Yangon
Opening Hours
Monday | 09:00 - 16:30 |
Tuesday | 09:00 - 16:30 |
Wednesday | 09:00 - 16:30 |
Thursday | 09:00 - 16:30 |
Friday | 09:00 - 16:30 |
Saturday | 09:00 - 16:30 |
Than Thu Mar
Yangon
Insurance, Logistics & General Services
22nd Floor, Junction City Tower, Bogyoke Aung San Road
Yangon
💓မိသားစုကိုချစ်သောသူများအတွက်💓
Yangon, 11071
If you're interested in protecting families from the comfort of your home, send me a message. I would be happy to discuss our opportunity with you. Keep dreaming!
Lanmadaw Street
Yangon
𝙋𝙖𝙮𝙋𝙖𝙡 𝘼𝙘𝙘𝙤𝙪𝙣𝙩 & 𝙀𝙭𝙘𝙝𝙖𝙣𝙜𝙚 𝙎𝙚𝙧𝙫𝙞𝙘𝙚𝙨 Viber - 09959877552 , 09980385770
Urban Asia Center, Room No 254, 2nd Floor , Corner Of 48th Street & Maha Bandula Road, Botataung Tsp
Yangon, 11221
We provide an official platform for receiving and recording the amount of money transferred to/from
Yangon
Learning and Development, Organizational Development and Business Development
22nd Floor, Junction City Office Tower, Bogyoke Aung San Road, Pabedan Township
Yangon
သင်နှင့် သင့်မိသားစုအတွက်