KAMP - MEPF Consultancy and Build

Looking to collaborate with an experienced Chiller Technician (i.e. York, Carrier, Trane)please PM for possible maintenance scope.

Are you looking for AHU and FAHU with AHRI and Eurovent Certified Products?

Please let us know...but we only entertain confirmed projects.

Country of Origin: Middle East
Factory Test (FAT) - Can be arranged

We need an HVAC experience contractor for dismantling chilled water pumps, screw water cooled chillers, Cooling Towers, control panels and chilled water accessories.

Note, the existing installed equipment is located in Manila and after dismantling it will be shipped from Port of Manila to Port of Cebu.

For those who are interested and experienced in this particular job, please send me your interest thru the KAMP website email. Thank you.

External Street Parking - Light Post Concrete Foundation preparation with underground cabling

Testing 2-sets of Fire Pumps with 2,500 gpm and 1,000 gpm respectively. One for Building Sprinkler system and one for the external Fire Hydrants system.

Only use "Listed Flexible Sprinkler Hose Fittings" if may deemed necessary...

Fire Protection Specialist
Fire Protection Testing and Commissioning

KAMP is experienced in managing the installation, testing and commissioning of Cold Rooms ( Freezer-Chiller) in various sizes.

Calling!

Architects and Developers, KAMP is here to partner and collaborate with you, for your MEPF Design, Construction and Project Management requirements.

KAMP will provide you with our technical expertise for small to large and complex projects.

Why Are Smoke Alarms Important?

A smoke alarm is critical for the early detection of a fire and could mean the difference between life and death. ... In a fire, smoke and deadly gases tend to spread farther and faster than heat. That's one reason why most fire victims die from inhalation of smoke and toxic gases, not from burns. The Fire Protection consultant or specialist contractor should not accept a non-standard, non-certified material, devices and equipment.

KAMP is experienced in Fire Alarm System Testing and Commissioning Process.

Fire Alarm Testing and Commissioning

“Calling Project Developer / Owner / Contractors”

Do not start your project without a
Project Management Team on board….whether they are Big or Small projects…
…otherwise you lost substantial amounts of money due to delays on deliverables, scope gaps and other disputes.

KAMP will provide Project Management for any size and type of Construction Project

Management
Disputes

“Every opening in a fire barrier shall be protected to limit the spread of fire and restrict the movement of smoke from one side of the fire barrier to the other.”

An experienced Architects and MEPF specialist knows the requirements of Building Code and NFPA Standards, when an MEPF services are penetrating a Fire Rated Walls, Slabs and Partition. Fire sealant is a must and should be selected to match the type of material and Fire Rating classification of walls, slabs and partition.

KAMP Engineers are well trained to advise and specify the proper sealant requirements that suits the area of application.

An experienced HVAC specialist should integrate an Automatic Chemical Dosing System for the closed loop chilled water system. Most chillers use water for heat transfer. Being operated at low temperatures, the system experiences more corrosion. Micro biological fouling, corrosion induced by anaerobic bacteria, so the water must be properly treated to prevent scaling, corrosion and biological growth.

KAMP will Design and Build the complete Automatic Chemical Dosing System to protect the HVAC equipments, control and monitoring devices.

As a Plumbing or Public Health specialist, it is important to properly design and size the pumps to suit the project requirements. Some studies have shown that 30% to 50% of the energy consumed by pump systems could be saved through equipment and control system.

KAMP engineerr's is managing the installation and commissioning of these High-pressure and specialty pumps.

KAMP will design and build the complete public health pumping system.

Home - KAMP Engineering Consultancy As a multi discipline company that aims international excellence in Engineering, we use values as foundations on which we built our company.

Pump Room for Chilled water pumps and piping installation

It is a must that the HVAC specialist understand the requirements for the suction and discharge piping, length of pipes, proper fittings, provisions for monitoring/control devices and gauges.

KAMP engineers is managing the installation of this project.

The pressure and flowmeter assembly kit for FHC pressure and flow test.

" The Fire Fighting specialist is to make sure that the hydraulic calculation will justify and meet the actual requirements of the most remotest FHC (Class I) residual pressure and water flowrate at 100psi and 250gpm respectively."

KAMP will strictly adhere RA 9514 - The Fire Code of the Philippines" - Section 10.2.6.7 - "The plans and specifications to be submitted shall be signed and sealed by a Professional Mechanical Engineer (PME).

Hence, no other professional organization is qualified to design, seal and stamp the complete Fire Protection system.

KAMP is a sustainable company and part of our vision, is to be the leader in innovation both in MEPF Design and Construction. KAMP is here to help the architects and developer in delivering their dreamed sustainable projects that we Filipinos can be proud-of, not only locally but across the globe.

For us to materialize this vision, KAMP is crowdsourcing the following Fire Protection products for our future references (see below). And as much as we wanted to entertain all suppliers and manufacturers, KAMP will only consider materials that are certified and manufactured in accordance with relevant standards.

For interested parties, you may send us your documents at [email protected] or visit our website at https://www.kampconstruct.com

Crowdsourcing for Fire Protection Materials and Equipments:
1. Fire Pumps (Electric/Diesel) – UL Listed – Non-UL (optional-for temporary and during construction purposes only)
2. Jockey Pumps – UL Listed – Non-UL (optional-for temporary and during construction purposes only)
3. Fire Pump Controlers
4. Steel Pipes
5. Pipe Fittings _Groove Type
6. Pipe Hangers, clevis and clamps
7. Zone control valves, sight glass, isolation valves, check valves
8. Post Indicator Valves (PIV), OS&Y Valves
9. Flow meters
10. Fuel Day Tank and accessories
11. Alarm Check Valve Assembly
12. Fire Hose Cabinets and Fire Hose Accessories
13. Fire Hydrants
14. Fire Department Connection (FDC or Breeching Inlets)
15. Sprinklers – UL Listed
16. Suppression System and accessories
17. Smoke Detectors and Fire Detection system
18. Fire Alarm Panels and accessories
19. Voice Evacuation System
20. Fire Rated cables

Home - KAMP Engineering Consultancy As a multi discipline company that aims international excellence in Engineering, we use values as foundations on which we built our company.

KAMP is a sustainable company and part of our vision, is to be the leader in innovation both in MEPF Design and Construction.

KAMP is here to help the architects and developer in delivering their dreamed sustainable projects that we Filipinos can be proud-of, not only locally but across the globe.

For us to materialize this vision, KAMP is crowdsourcing the following HVAC products for our future references (see below). And as much as we wanted to entertain all suppliers and manufacturers, KAMP will only consider materials that are certified and manufactured in accordance with relevant standards. For interested parties, you may send us your documents at [email protected] or visit our website at https://www.kampconstruct.com

Crowdsourcing for HVAC Materials and Equipments:

1. HVAC Ducting Materials - G.I, MS, pre-insulated.
2. Ducting Manufacturer - Ducts that are only manufactured as per SMACNA or DW 144.
3. Fire Rated Ducting material - MS and G.I.
4. Fire rated duct lining tape
5. Duct Insulation, matching tape, solvent
6. Duct cladding material, rivets, sealant
7. Fire Dampers, MSFD, with UL listed and VCD’s
8. Fire and Smoke Damper Actuators
9. Sandtrap Louvers
10. Air Grilles, Diffusers, with technical catalogue
11. Circular Flexible air duct
12. Duct sealant
13. Sound attenuators
14. FAHU - Fresh Air Handling Units - CHW System
15. AHU - Air Handling Units - CHW System
16. FCU - Fan Coil Unit (Ducted/Non-Ducted)-CHW System
17. VAV
18. Split DX Unit - Ducted/Non-Ducted
19. DX Packaged Units - Ducted
20. Cooling Towers
21. Inertia Bases
22. Vibration pads and springs
23. Chilled Water Pumps
24. CHW Expansion Tanks
25. CHW Pressurization Units
26. Flowmeters
27. CHW PLC’s
28. CHW System-monitoring devices and guages
29. CHW Pipe Hangers & Clevis supports
30. CHW pipe inserts
31. Ventilation and Fire Rated Fans
32. CHW pipes, carbon steel, AP
33. CHW pipe fittings and Flanges (PN or Class Rating)
34. CHW pipe insulation
35. Welding rods for ducts and pipes
36. Bolts and Nuts

As an HVAC specialist, it is a must that all relevant standard code of practice should be strictly followed, particularly in maintaining correct mounting location of the flow meters, PICV’s, isolation valves and monitoring devices in the chilled water PHEX and pumping system.

KAMP engineer’s is managing the installation and commissioning of the ETS and pumping station.

KAMP will design and build the complete automated ETS and Chilled water system, using only certified products and will install in accordance with the best industry practice.

It is very important that MEPF specialist must know and understand the standard code requirements, particularly if fire fighting pipes are crossing building expansion joints.

This is the proper fittings and supports where fire fighting pipes are crossing building expansion joints.

KAMP will design and build the complete Fire Fighting piping system, taking into consideration the International and local Building Code requirements.

"Radiator air discharge shall be ducted outdoors or to
an exterior opening by a 2-hour rated air transfer system.
Ventilation air supply and discharge for radiatorcooled, EPS shall have a maximum static restriction of 125 Pa
(0.5 in. of water column) in the discharge duct at the radiator outlet."

This is the proper ducting arrangement for the Genset radiator. KAMP engineers are involved in managing the installation of this Genset.

KAMP will design and build the complete Genset to include the fuel and ventilation system.

"Fire Pump Buildings or Rooms with Diesel Engines.
Fire pump buildings or rooms enclosing diesel engine pump drivers and day tanks shall be protected with an automatic sprinkler system installed in accordance with International Standards" or as stipulated in the Code and Standards of the local AHJ.

This is how to arrange and support the different components and devices of the Fire Pump System (Electric & Diesel).

KAMP will design and build the complete Fire Pump system in accordance with the relevant codes and standards.

KAMP - MEPF Consultancy and Build updated their website address.

KAMP - MEPF Consultancy and Build updated their business hours.

Fire Protection - Wet Risers with Pre-Action System
" This is how to install and properly support the piping and arrange in accordance to prevailing standards and practice"
KAMP is well experienced in design and installation for complex Fire Protection projects and well versed in local and international standards.

Fire Protection - Wet Risers with Pre-Action System
" This is how to install and properly support the piping and arrange in accordance to prevailing standards and practice"

KAMP is well experienced in design and installation for complex Fire Protection projects and well versed in local and international standards.