VW-Porsche 612 RS
Conseptcar. Basis VW 412 -74. Build on parts from Porsche 911 G-model
Ovner: https://www.facebook. Then I did´t have to do something with the fenders. But no.
A VW 412 with Porsche 911 engine have been a dream for many years. The car was ready for 911 engine and transmission when I bought it. The plan was just to put in a engine and put everything together and drive. But this story wanted a another ending :-) I used some wheels from one of my fathers Porsche´s. I really wanted Ruf (8x17) wheels, but they are really hard to get. But some day I heard from
17/07/2024
Testing of speedo 😊
12/06/2024
Hate those original crappy bushing so new one is made 😊
13/05/2024
Enginecover
11/05/2024
Coilovers: Check 😊
09/05/2024
Rear coilovers from Porsche GT2
17/04/2024
Managed to get hold of a set Bilstein coilovers from Porsche 996 GT2 rear.
And the H&R spring fits like a glove 😊
They are perfect and almost bolt on
First roadtrip ever.
Some more adjustments needed.
But its was powerful.
Didn’t had the guts to floor it even I really wanted 😊
Even the "popoffs" worked well: pffff, pffff
Babysteps 🥰
First time running and after a while no smoke.
Needed badly some temperatur
21/02/2024
Trying out some rear coilovers.
Paired together from here and there😊
Springs/shocks from Porsche
Tubes from Kercher
Need some mods in the botten and top
17/02/2024
The "new" twins in tha house!!
🥰
Upgraded 993 turbos
14/01/2024
New generator in place 😊
Test
11/01/2024
A new generator was badly needed.
It reguired some machining and the local shop Cylmo did a perfect jobb as alwas 😊
03/01/2024
Lights check!
01/01/2024
Details 😊
05/05/2023
Ready for carshow
01/05/2023
Breading brakes/clutch.
Works every time 😊
30/04/2023
Some more brackets needed.
Hydraulic line clutch
22/04/2023
Catch tanks connected
17/04/2023
Clutch cylinder done
08/04/2023
It did look okay 😊
07/04/2023
Making of catch tanks.
Thought it worked without but no 🥲
More work but I hope it will be good
18/03/2023
Here we go again 😊
Yes, the smoke is gone after overhauled the right turbo.
Will take the left one also.
Need some valve adjustment though 😊
12/03/2023
At last the oil leak problem at turbo solved.
The turbos it the only part I didn’t overhauled because I bought this as good used parts.
But the oilrings was pretty worn out.
The exhaust ring was "hammered" on the outside and the intake ring has 0.73mm thickness compare to the new ones who is 0.83mm thick.
And with upgraded bearings
27/01/2023
Have a nice weekend 😊
10/12/2022
Struggeling with oil support to the turbos. They get too much oil.
Need to narrow in the restrictors.
23/11/2022
Videos (show all)
