Bitumat Water Proofing.ph
Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Bitumat Water Proofing.ph, Building Materials, Gracepark, Caloocan.
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
Thank you for trusting Bitumat!
Say goodbye to water leakage problem.
Waterproof your property/building/home today!
Water Proofing!
Email us at [email protected] for your quotation request.
Mesage us directly here at Bitumat Water Proofing.ph
Water Proofing
Email us at [email protected]
Contact Number: 09566844413
Look for John Balingit
Water Proofing
Email us at [email protected]
Email us at [email protected]
Water Proofing!
Just message us for your needs.
Thanks a lot.
Email us at [email protected]
Water Proofing Available!
Message us for your queries.
Water Proofing!
WE have:
- ROOFSEAL - Polymer Modified Bitumen Membrane with
Nonwoven Polyester or Glass Reinforcement
- POLYFLEX - APP Modified Waterproofing Membrane
- POLYBOND - Oxidized Bitumen Membrane with Nonwoven
Polyester Reinforcement
- SYNROOF - Premium Quality Acrylic Waterproofing Coating
Email us at [email protected] for you inquiries.-
POLYBOND - Oxidized Bitumen Membrane with Nonwoven Polyester Reinforcement
Email us at [email protected] for you inquiries.
DESCRIPTION
BITUMAT POLYBOND waterproofing membrane consists of a nonwoven polyester reinforcement, impregnated and coated on both sides with oxidized bitumen. Properly installed, BITUMAT POLYBOND forms an impervious waterproofing blanket which accepts normal structural movement without breaking or cracking.
USER
BITUMAT PREMIERFLEX-4000 is a general purpose waterproofing membrane and is excellent in multi-layer or single layer roofing system. When surfaced with granular slate, BITUMAT PREMIERFLEX-4000 is ideal as an exposed top layer. Also ideal for underground waterproofing systems. When superior performance is required, BITUMAT PREMIERFLEX-4000 is the answer, especially in extreme cold climates.
OUTSTANDING FEATURES
Excellent cost performance ratio.
Good resistance to fatigue and tear.
Outstanding bondability and seam integrity Impact and puncture resistant.
Single layer installation reduces costs.
GENERAL DATA
Nominal Roll Length : 10 Mtr. Nominal Roll Width : 1Mtr Nominal Thickness : 3,4, or 5 mm
APPLICATION
BITUMAT POLYBOND is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together. Peripheries and protrusions are sealed according to specifications.
COVERAGE RATE (Approx.)
(Rate may vary as per site requirement)
Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / linear Mtr. Average wastage : 3 - 5 %
TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the reinforcement. Overlaps should be reheated from the top and resealed with a trowel to ensure seam integrity.
For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.
POLYFLEX - APP Modified Waterproofing Membrane
Email us at [email protected] for you inquiries.
DESCRIPTION
BITUMAT POLYFLEX is a uniquely formulated, prefabricated waterproofing membrane with a special multi-layered design for superior pliability, tensile strength, workability and resistance to elements. The multi-layered design consists of a polyester core coated on both sides with APP modified bitumen. The polyester core gives the membrane high tensile strength, elongation and superior lap joint strength.
USER
BITUMAT POLYFLEX membranes are ideal for a wide range of waterproofing applications including roofs, reservoirs, basements, tunnels and car parks. BITUMAT POLYFLEX may be utilized in exposed and covered applications.
OUTSTANDING FEATURES
Total impermeability for total waterproofing.
Dimensional stability.
Excellent resistance to aging & weathering.
Outstanding bondability & seam integrity.
Very high resistance to impact & puncture.
Stability at high temperatures & flexibility at low temperatures.
GENERAL DATA
Nominal Roll Length : 10 M Nominal Roll Width : 1 M Nominal Thickness : 4mm Nominal Weight : 4mm / 47 kgs per roll
PACKAGING
pallet 4mm - 23 rolls
FINISHES
BITUMAT POLYFLEX is available in two basic finishes:
1. Black smooth finish with polythylene surfaces for covered applications.
2. Coloured granule surfacing for exposed applications.
QUALITY CONTROL
In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Independent Laboratories.
STANDARDS
BITUMAT POLYFLEX - complies with the requirements and tolerance levels of :
1. The American Society for Testing & Material ASTM-D-6222 Type I.
2. UEAtc (European Union of Technical Agreement). MOAT 27 - 1983 and MOAT 30 - 1984.
3. CGSB (Canadian General Standards Board) 37-GP56M-July 1980.
INSTALLATION TOOLS REQUIRED:
Gas torch, Knife, Trowel, Measuring tape, Marking string, Gloves.
APPLICATION
BITUMAT POLYFLEX is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together. Peripheres and protusions are sealed according to specifications.
COVERAGE RATE (Approx.)
(Rate may vary as per site requirement)
Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / Linear Mtr. Average wastage : 3 - 5 %
TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement.
Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity
For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.
POLYFLEX - APP Modified Waterproofing Membrane
DESCRIPTION
BITUMAT POLYFLEX is a uniquely formulated, prefabricated waterproofing membrane with a special multi-layered design for superior pliability, tensile strength, workability and resistance to elements. The multi-layered design consists of a polyester core coated on both sides with APP modified bitumen. The polyester core gives the membrane high tensile strength, elongation and superior lap joint strength.
Polyflex PDF
USER
BITUMAT POLYFLEX membranes are ideal for a wide range of waterproofing applications including roofs, reservoirs, basements, tunnels and car parks. BITUMAT POLYFLEX may be utilized in exposed and covered applications.
OUTSTANDING FEATURES
Total impermeability for total waterproofing Dimensional stability Excellent resistance to aging & weathering Outstanding bondability & seam integrity Very high resistance to impact & puncture Stability at high temperatures & flexibility at low temperatures
GENERAL DATA
Nominal Roll Length : 10 M Nominal Roll Width : 1 M Nominal Thickness : 3,4 or 5 mm Nominal Weight : 4mm / 47 kgs per roll
PACKAGING
3mm - 28 rolls / pallet 4mm - 23 rolls / pallet 5mm - 16 rolls / pallet
FINISHES
BITUMAT POLYFLEX is available in two basic finishes:
1. Black smooth finish with polythylene surfaces for covered applications.
2. Coloured granule surfacing for exposed applications.
QUALITY CONTROL
In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Independent Laboratories.
STANDARDS
BITUMAT POLYFLEX - complies with the requirements and tolerance levels of :
1. The American Society for Testing & Material ASTM-D-6222 Type I.
2. UEAtc (European Union of Technical Agreement). MOAT 27 - 1983 and MOAT 30 - 1984.
3. CGSB (Canadian General Standards Board) 37-GP56M-July 1980.
INSTALLATION TOOLS REQUIRED:
Gas torch, Knife, Trowel, Measuring tape, Marking string, Gloves.
APPLICATION
BITUMAT POLYFLEX is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together. Peripheres and protusions are sealed according to specifications.
COVERAGE RATE (Approx.)
(Rate may vary as per site requirement)
Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / Linear Mtr. Average wastage : 3 - 5 %
TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement.
Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity
For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation
ROOFSEAL - Polymer Modified Bitumen Membrane with Nonwoven Polyester or Glass Reinforcement
BITUMAT ROOFSEAL is a pre-fabricated polymer modified bitumen membrane designed for economy and easy applications.
BITUMAT ROOFSEAL “P” is re-inforced with a non-woven polyester fabric, whereas BITUMAT ROOFSEAL “G” is reinforced with a glasfiber mat. The re-inforcement is impregnated and coated on both sides with polymer modified bitumen.
Email us at [email protected].
USER
BITUMAT ROOFSEAL membrane is ideal for a wide range of waterproofing applications including roofs, basements, tunnels, car parks and reservoirs.
OUTSTANDING FEATURES
Total impermeability. .
Good bondability & seam integrity.
Stability at high temperature.
Good flexibility.
Compatible with all normal roofing and building components.
GENERAL DATA
Nominal Roll Length : 10 Mtrs. Nominal Roll width: 1 Mtr Nominal Thickness: 3&4 MM Nominal Weight : 4mm / 47 Kgs per Roll Re-inforcement : Non-woven polyester / Glasfibre mat
FINISHES
BITUMAT ROOFSEAL is available in two basic finishes:
Black smooth finish with polyethylene surfaces for covered applications.
Granule surfacing for exposed applications.
QUALITY CONTROL
In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Independent laboratories.
STANDARDS
GLASFLAME complies with the requirements and tolerance levels of UEAtc (European Union of Technical Agreement) MOAT 27-1983 and MOAT 30-1984 and CGSB (Canadian General Standards Board) 37-GP-56M - July 1980.
Installation Tools Required
Gas torch Knife Trowel Measuring tape Marking string Gloves
COVERAGE RATE (Approx.)
(Rate may vary as per site requirement)
Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / Linear Mtr. Average wastage: 3 - 5 %
PACKAGING
3mm - 28 Rolls / Pallet 4mm - 23 Rolls / Pallet
TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement.
Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity.
For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.
APPLICATION
BITUMAT ROOFSEAL is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together.
Peripheries and protrusions are sealed according to specifications
SYNROOF - Premium Quality Acrylic Waterproofing Coating
BITUMAT SYNROOF is a versatile acrylic elastomeric waterproofing coating. It cures to a highly flexible, tough, seamless membrane for the protection of all kinds of roofs.
Email us at [email protected] for your inquiries.
INSTALLATION
SURFACE PREPARATION Roof and other surfaces must be thoroughly clean, dry, free from moss, dirt, oil, grease and loosely adhering materials. In case of metal surfaces, remove rust and contamination and apply a coat of anti-corrosive primer. To achieve best results, a fiber mesh reinforcing mat should be embedded into first coat of BITUMAT SYNROOF whilst still wet mainly at expansion areas and joints with parapet. Depending on the nature of substrate, a priming coat with BITUMAT SYNROOF diluted with 20% water may be required.
USER
BITUMAT SYNROOF is suitable for application to most types of roofs, flat or pitched eg., concrete, metal, asbestos, wood etc. It also forms a heat and solar reflecting membrane.
OUTSTANDING FEATURES
Strong and flexible.
Excellent adhesion to substrate.
Vapour permeable.
Resistant to aging and UV radiation.
Designed to be used in severe climatic conditions.
Single pack.
Labour saving.
Safe, non-flammable, non-toxic.
Easy to apply!
PACKING
20 Kg. Metal Pail
Note : BITUMAT SYNROOF is tested as per ASTM test methods and report is available on specific request.
APPLICATION
By soft bristle brush, roller or airless spray. Minimum 1 mm thick dry film is recommended for a satisfactory performance and perfect recoating interval is 8 hours at 30 Deg. C., 65% RH
CURING
Allow 24 hours for the final curing to take place at normal working temperatures. Complete curing is required before any insulation or protection board is placed.
STORAGE
Store under cover at temperature above 5° C. and below 30° C. Minimum shelf life of one year in unopened containers can be expected.
COVERAGE
Sq. mtr/kg to obtain 500 micron dry film thickness.
MECHANICAL PROTECTION
Traffic roofs : Maximum protection can be achieved by insitu screed. Use a Kraft paper or polyethylene separation layer over the insulation boards. Then lay a topping screed of 4 cm to 5 cm thickness
Non-Traffic roofs : Place a non woven polyester separation layer BITUMAT BITUTEX, over the insulation boards. Then cover to a minimum depth of 5 cm with 15/30 gauge washed gravel. For thicker insulation boards, the gravel depth should at least be equal to that of the board thickness.
PRECAUTIONS
Bitumen or asphalt roof surfaces receiving a coating of BITUMAT SYNROOF should be thoroughly dry.
Never apply if rain is imminent.
Application at temperatures below +5° C may result in incomplete film formation, with reduced elasticity and the possibility of cracks forming.
Do not use BITUMAT SYNROOF on areas that will be constantly submerged in water.
HEALTH AND SAFETY
Generally safe, non-toxic and non-flammable whilst wet. However, avoid prolonged skin contact. Use of cream, gloves is advisable. If eyes are affected by BITUMAT SYNROOF, rinse with copious amount of clean water. If ingested, seek medical attention immediately.
Water Proofing!
Bitumat Philippines
For inquiries email us at
[email protected]
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Website
Address
Caloocan
1421
Caloocan, 1400
Roller Shades / Korean Blinds / Motorized Blinds / Combination Blinds / Venetian Blinds / Wood Blinds
Brgy. 178, Metro Manila
Caloocan, 1421
We supply different types of aggregates and boulders from 3/4 up to Class I boulders
Blk 1 Lot 16 Almar Subdivision Camarin Road Caloocan City
Caloocan
Caloocan City
Caloocan
We Supply and Install- granite, quartz,marble & modular cabinet. Excellent quality. Reasonable price.
Caloocan
Powertools � � Direct warehouse �FREE SHIPPING NATIONWIDE � CASH ON DELIVERY � BRANDNEW WI
Brgy. 177 Camarin
Caloocan
Construction Supply Materials Etc..
#11avocado Street Pangarap Village
Caloocan
-TILE SETTER /GRANITE INSTALLER/MASON & QUARTS -FINISHING CARPENTER/ELECTRICAL (framing, sheathing,
Phase 9 Pckg 3 Blk 15 Lot8 Maharlika Street
Caloocan, 1428
we do supply and install all kinds of product.glass n aluminum we also fabricate and install stainless railings, terrace, balcony's we supply install tempered glass fix glass part...
De Jesus Street, Brgy. 89 East Gracepark
Caloocan, 1400
Supplier of Scaffolding Materials