BoonTech

BoonTech BoonTech BTB-170HB Breadboard
170 holes Buckle Type Breadboard

● Variances: 170 Holes - White, Black, Red, Blue, Green, Yellow
● Breadboards are designed and manufactured for solderless experimentation of electronic circuits. Since various electronic components can be inserted or pulled out at will, eliminating the need for welding and saving the time of circuit assembly, and the components can be reused, it is very suitable for the assembly, debugging and training of electronic circuits.
● Phosphor bronze nickel plated spring clips. Matching jumper, wire diameter 0.8mm.
● Plastic parts: ABS
● Dimension: 35mm x 47mm x 8.5mm

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech DC Boost USB to DC Jac 5.5 x 2.1mm
5VDC to 12VDC DC Boost USB Cable to DC Jack

● With boost components, the voltage USB Input is 5VDC passed through components to boost the voltage output to 12VDC 0.8 to 1A.
● It use for 12VDC devices connected to USB power bank or USB type power supply.
● DC plug has 5.5mm x 2.1mm

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech DC Buck Boost USB Module
3.5-12VDC to 1.2-24VDC DC DC Buck Boost Module Converter

● Input Voltage: 3.5VDC to 12VDC
● Output Voltage: 1.2VDC to 24VDC
● Output Power: (1) 1.2VDC to 2VDC Input Voltage - Output Power within 2W (2) 2VDC to 20VDC Input Voltage - Output Power within 3W (3) 20VDC to 24VDC Input Voltage - Output Power within 2.5W.
● Display Bit: 3Bit Digital Tube Display
● Size: 80mm x 20mm x 14mm
● Features: (1) One button to turn off or turn on the output. (2) Supply ON/OFF display screen. (3) Support low power mode. (4) Support sleep mode. (5) Support both standard USB (USB A), micro USB and pads or surface soldered input voltage. (6) Potentiometer with rotating handle for variable voltage output.
● Sample Application: Battery Charger, LED Drive Power, Instrument Voltage Display, Test Meter, Circuit Test, Power conversion and more!
● Note: Kindly use this module within the power range upto 3W - kindly read the detailed description.

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech ESP8266 CH340 V3
NodeMCU v3 ESP8266 CH340 Development Board

● The ESP8266 is the name of a micro controller designed by Espressif Systems. The ESP 8266 itself is a self-contained WiFi networking solution offering as a bridge from existing micro controller to WiFi and is also capable of running self-contained applications.
● This module comes with a built in USB connector and a rich assortment of pin-outs. With a micro USB cable, you can connect nodeMCU devkit to your laptop and flash it without any trouble, just like Arduino. It is also immediatelly breadboard friendly.
● Power Data: 3.3V 10μA - 17mA
● Network Specs: Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack. +19.5dBm output power in 802.11b mode - 802.11 supports b/g/n.
● GPIOs: 17 (multiplexed with other functions)
● Analog to Digital: 1 input with 1024 step resolution.
● Maximum concurrent TCP connections: 5


Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech Fast Charger QC3.0 QC2.0
4.5-32VDC to 3-12VDC DC-DC Buck Module Converter

● Buil-in synchronous switching step-down converter chip
● Input voltage range: 4.5VDC to 32VDC (input voltage must be higher than the output voltage)
● Output Power: 24W (4VDC 3.6A, 5VDC 3.4A, 9VDC 2.5A, 12VDC 2A)
● The output has CV/CC characteristics: CV Mode: Output current is less than the set value; CC Mode: Output current is greater than the set value.
● The conversion rate is as high as 97%.
● Soft start function. 220kHz switching frequency.
● It supports different fast charge protocol such as BC1.2, QC2.0, QC3.0, MTK PE1.1/PE2.0, FCP, AFC, SFCP.
● It has multiple protection with high reability - output overcurrent, input overvoltage, input undervoltage, output short circuit, overtemperature protection, ESD 4kV, DC withstand voltage 48VDC.
● The USB output voltage depends on your device. Different devices have different output voltages. The convetional USB output voltage is 5VDC. It follows the QC protocol and has different fast charging voltages.

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech Relay Module 5VDC l 12VDC l 24VDC l 1-Way l 2-Way l 4-Way l 8-Way
with Optocoupler Isolation Low-Level trigger

● PCB Color: Blue or Black (depend on stock)
● For 2-way and above relay has 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixation
● The relay is SPDT - single pole double throw. One common terminal, one normally open terminal, one normally closed terminal.
● Optocoupler isolation, good anti-interference. Low level pull in, high level release. The status indicator is on when it is pulled in, and the status indicator is off when it is released.
● VCC is the system power supply, and JD_VCC is the relay power supply. Just plug in the jumper cap - this is for 2-way and more.
● Electrical Parameters: (1) Supply Voltage 24VDC. (2) Current: >100mA. (3) Load: 250VAC 10A AC or 30VDC 10A
● Wiring Instructions: (1) VCC: Positive system power supply. (2) GND: Negative system power supply. (3) IN1, IN2, IN3 ... INx: Relay Control Port. (Kindly do not connect it in reverse, which will cause the module to burn out and warranty will be void.)

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech Relay Module 5VDC l 12VDC l 24VDC l 1-Way l 2-Way l 4-Way l 8-Way
with Optocoupler Isolation Low-Level trigger

● PCB Color: Blue or Black (depend on stock)
● For 2-way and above relay has 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixation
● The relay is SPDT - single pole double throw. One common terminal, one normally open terminal, one normally closed terminal.
● Optocoupler isolation, good anti-interference. Low level pull in, high level release. The status indicator is on when it is pulled in, and the status indicator is off when it is released.
● VCC is the system power supply, and JD_VCC is the relay power supply. Just plug in the jumper cap - this is for 2-way and more.
● Electrical Parameters: (1) Supply Voltage 24VDC. (2) Current: >100mA. (3) Load: 250VAC 10A AC or 30VDC 10A
● Wiring Instructions: (1) VCC: Positive system power supply. (2) GND: Negative system power supply. (3) IN1, IN2, IN3 ... INx: Relay Control Port. (Kindly do not connect it in reverse, which will cause the module to burn out and warranty will be void.)


Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech Relay Module 5VDC l 12VDC l 24VDC l 1-Way l 2-Way l 4-Way l 8-Way
with Optocoupler Isolation Low-Level trigger

● PCB Color: Blue or Black (depend on stock)
● For 2-way and above relay has 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixation
● The relay is SPDT - single pole double throw. One common terminal, one normally open terminal, one normally closed terminal.
● Optocoupler isolation, good anti-interference. Low level pull in, high level release. The status indicator is on when it is pulled in, and the status indicator is off when it is released.
● VCC is the system power supply, and JD_VCC is the relay power supply. Just plug in the jumper cap - this is for 2-way and more.
● Electrical Parameters: (1) Supply Voltage 12VDC. (2) Current: >100mA. (3) Load: 250VAC 10A AC or 30VDC 10A
● Wiring Instructions: (1) VCC: Positive system power supply. (2) GND: Negative system power supply. (3) IN1, IN2, IN3 ... INx: Relay Control Port. (Kindly do not connect it in reverse, which will cause the module to burn out and warranty will be void.)

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]

BoonTech Relay Module 5VDC l 12VDC l 24VDC l 1-Way l 2-Way l 4-Way l 8-Way
with Optocoupler Isolation Low-Level trigger

● PCB Color: Blue or Black (depend on stock)
● For 2-way and above relay has 4 fixing screw holes around the board, the hole diameter is 3.1mm, which is convenient for installation and fixation
● The relay is SPDT - single pole double throw. One common terminal, one normally open terminal, one normally closed terminal.
● Optocoupler isolation, good anti-interference. Low level pull in, high level release. The status indicator is on when it is pulled in, and the status indicator is off when it is released.
● VCC is the system power supply, and JD_VCC is the relay power supply. Just plug in the jumper cap - this is for 2-way and more.
● Electrical Parameters: (1) Supply Voltage 5VDC. (2) Current: >100mA. (3) Load: 250VAC 10A AC or 30VDC 10A
● Wiring Instructions: (1) VCC: Positive system power supply. (2) GND: Negative system power supply. (3) IN1, IN2, IN3 ... INx: Relay Control Port. (Kindly do not connect it in reverse, which will cause the module to burn out and warranty will be void.)

Open for Bulk Order, Best Price Offer!
We ship Nationwide!
For more inquiries:
📎 FB Page: https://www.facebook.com/ejdalanonenterprisecmy
📞 0985-617-6924
📲 Viber : 0966-244-6045
📧 [email protected]