Epsiron
Może Ci się spodobać
Projektujemy, produkujemy i sprzedajemy autorskie systemy automatyki przemysłowej.
W naszej ofercie znajdziesz m.in.:
- kontrolery ruchu maszyn CNC,
- regulatory wysokości palnika,
- wypalarki plazmowe.
Co nowego w SheetCAM TNG V7.0.21?
Poniżej szczegółowy opis zmian (ENG).
Polecamy zakup oprogramowania w naszym sklepie www.epsiron.pl
Natomiast osoby zainteresowane nowościami zachęcamy do zapoznania się z changelog'iem wersji deweloperskiej 7.1.35.
V7.0.21 (wersja stabilna)
Fixed: Face operations can cause following operations to be offset.
V7.1.35 (wersja deweloperska)
Fixed: Not importing SVG arcs correctly
Fixed: Import SVG crashes SheetCam (Linux only)
Co nowego w wersji stabilnej SheetCAM TNG V7.0.20?
Producent zadbał o 19 poprawek do poprzedniej wersji, które z pewnością ułatwią pracę z maszyną. Poniżej szczegółowy opis zmian (ENG).
Polecamy zakup oprogramowania w naszym sklepie www.epsiron.pl
Natomiast osoby zainteresowane nowościami zachęcamy do zapoznania się z changelog'iem wersji deweloperskiej 7.1.33.
SHEETCAM TNG V7.0.20:
-Changed: Nesting mode->set part order now highlights the parts that have been sequenced
-Fixed: Operation code snippets sometimes being output twice.
-Fixed: Crash sometimes when selecting an previously created shape in shape tool.
-Fixed: Shapes sometimes offsetting lines the wrong side.
-Fixed: When you end quick cut sequence, the start point properties box shows even if it is not pinned.
-Fixed: Very rare crash when opening post editor
-Fixed: Check boxes in operation windows often need two clicks
-Fixed: Zigzag pocket occasionally missing areas
-Fixed: Zigzag pocket inaccurate when using very small cutters
-Changed: Post options and post variables now show booleans as check boxes
-Changed: Rotary plugin simulator now has an option to set the rotary axis letter
-Fixed: Occasionally getting path directions wrong when drawing contains large arcs.
-Fixed: CSV import ignores tool names
-Fixed: Corner loops causing some path rules to be incorrectly positioned.
-Changed: Tweaked arc matching to be more aggressive
-Added: line shape
-Fixed: currentZ is not correct in OnPenDown if the next move is an arc.
-Increased maximum value that can be entered in Options->application options->advanced->start point tool clearance.
-Fixed: Zigzag pocket crashing in some cases if the shape is too small for any zigzag paths
What's new in SheetCAM TNG 7.1.33 Development:
>Fixed: Simulation not working correctly in locales that use a decimal comma
>Changed: Simulation now warns you if you have the wrong sim type selected.
>Fixed: Turn plugin displaying stock incorrectly
>Changed: Inkscape SVG files now use Inkscape layer names
>Fixed: post.DefineVariable always posting the value as text even if it is a number.
SheetCam Download
Co zyskujemy instalując nową stabilną wersję V7.0.19?
Dodano m.in. opcję „próg kąta” do opcji importu rysunku. Zmniejsz tę wartość, aby naprawić wielokąty konwertowane na okręgi.
Poza tym producent zadbał o 12 poprawek poprzedniej wersji, które z pewnością ułatwią pracę z maszyną.
***
What's new ?
April 1, 2022
Fixed: Save as job template saves the drawing data as well.
Added: 'angle threshold' option to drawing import options. Reduce this value to fix polygons being converted to circles.
Fixed: Default width of parts/operations/tools windows too small
Fixed: Face operation not lifting cutter in unidirectional mode
Fixed: 'point at' selection not allowing scroll wheel or key presses
Fixed: Overcut on spiral pockets always adding overcut moves to inner cuts
Fixed: Post and macro editor saving a blank file if the file contains non-Ascii characters.
Fixed: Occasional random crash or 'internal error' warning
Fixed: Crash after you change a tool type then cancel the tool dialog.
Fixed: Tool paths not updating if you change the tool type without changing any of that tool's parameters.
Fixed: Operation load not loading older saved operations
Fixed: position not updating in shape plugin
Fixed: shape plugin causing random crashing
Co zyskujemy instalując nową stabilną wersję V7.0.15?
🔸 Dodano m.in. obliczanie czasu pracy na dole ekranu, opcję skali części, publikację niestandardowych opcji w raporcie o pracy.
Poza tym producent zadbał o 12 poprawek poprzedniej wersji, które z pewnością ułatwią pracę z maszyną.
***
V7.0.15 i V7.0.14
Naprawiono: Edycja operacji cięcia strumieniem powoduje awarię
Dodano: Włącz/wyłącz zablokowane części w oknie części.
Naprawiono: Sporadyczne awarie podczas zamykania.
Naprawiono: Podejścia nie wyzwalają zdarzeń post OnOffset.
Naprawiono: W polu wyboru trybu konturu można było wybrać kontury z duplikatu.
Naprawiono: Niektóre pola wprowadzania liczb ignorowały klawisze i .
Dodano: publikuj niestandardowe opcje w raporcie o pracy
Naprawiono: Okno dialogowe wiercenia czasami pokazuje opcje wiercenia obrotowego, gdy wybrane jest narzędzie jet
Naprawiono: środkowy przycisk + kółko myszy obraca część w trybie zagnieżdżania
Naprawiono: brak przycisku „punkt na pozycji” w trybie „pojedynczego ruchu” w oknie ruchu.
Naprawiono: okno dialogowe w trybie „Wiele ruchów” bez nagłówków kolumn i pokazujące tylko jedną kolumnę
Naprawiono: Post Zainstaluj uszkadza znaki Unicode.
Naprawiono: Podświetlanie części nie działa w opcjach zadania->zagnieżdżanie, jeśli jesteś w trybie zagnieżdżania.
Dodano: opcję skali części. Zajrzyj do zagnieżdżonego menu prawego przycisku myszy lub menu prawego przycisku myszy na drzewie części.
Dodano: Obliczanie czasu pracy na dole ekranu
Naprawiono: wyskakujące okienko ostrzeżeń operacji pokazujące zbyt wiele wiadomości
Zmieniono: Okno dialogowe raportu o zadaniu zapamiętuje teraz swoją pozycję i rozmiar
.::EGLISH VERSION::..
V7.0.15
Fixed: Editing a jet cutting operation causes a crash
V7.0.14
Added: Enable/disable locked parts in part window.
Fixed: Occasional crash when closing.
Fixed: Leadins do not trigger OnOffset post events.
Fixed: In contour mode box select allowed you to select contours from a duplicate.
Fixed: Some number input boxes ignored the and keys.
Added: post custom options to job report
Fixed: Drill dialog sometimes showing rotary drilling options when a jet tool is selected
Fixed: Centre button + mouse wheel rotates a part in nesting mode
Fixed: 'point at position' button missing in 'single move' mode in the move dialog.
Fixed: Move dialog 'Multiple move' mode missing column headers and only showing one column
Fixed: Install post corrupts Unicode characters.
Fixed: Part highlighting does not work in job options->nesting if you are in nesting mode.
Added: Part scale option. Look in nesting right-click menu or part tree right-click menu.
Added: Job time calculation at the bottom of the screen
Fixed: Operation warnings popup showing too many messages
Changed: Job report dialog now remembers it's position and size
Co nowego w wersji V7.1.15 (Deweloperskiej) ?
Naprawiono: W polu wyboru trybu konturu można teraz wybrać kontury z duplikatu.
Naprawiono: Niektóre pola wprowadzania liczb ignorowały klawisze „i” .
Dodano: uwzględniaj niestandardowe opcje w raporcie o pracy
Naprawiono: Okno dialogowe wiercenia czasami pokazuje opcje wiercenia obrotowego, gdy wybrane jest narzędzie jet
Naprawiono: środkowy przycisk + kółko myszy obraca część w trybie zagnieżdżania
Naprawiono: brak przycisku „punkt na pozycji” w trybie „pojedynczego ruchu” w oknie ruchu.
Naprawiono: w oknie dialogowym „Wiele ruchów” brakowało nagłówków kolumn pokazujące tylko jedną kolumnę
Naprawiono: Zainstalowanie posta uszkadza znaki Unicode.
Naprawiono: Podświetlanie części nie działa w opcjach zadania->zagnieżdżanie, jeśli jesteś w trybie zagnieżdżania.
Dodano: opcję skali części. Zajrzyj do menu prawego przycisku myszy w zagnieżdżaniu lub w drzewie części.
Dodano: Obliczanie czasu pracy na dole ekranu
Naprawiono: wyskakujące okienko ostrzeżeń operacji pokazujące zbyt wiele wiadomości
Zmieniono: Okno dialogowe raportu o zadaniu zapamiętuje teraz swoją pozycję i rozmiar
Eng:
Fixed: In contour mode box select allowed you to select contours from a duplicate.
Fixed: Some number input boxes ignored the and keys.
Added: post custom options to job report
Fixed: Drill dialog sometimes showing rotary drilling options when a jet tool is selected
Fixed: Centre button + mouse wheel rotates a part in nesting mode
Fixed: 'point at position' button missing in 'single move' mode in the move dialog.
Fixed: Move dialog 'Multiple move' mode missing column headers and only showing one column
Fixed: Install post corrupts Unicode characters.
Fixed: Part highlighting does not work in job options->nesting if you are in nesting mode.
Added: Part scale option. Look in nesting right-click menu or part tree right-click menu.
Added: Job time calculation at the bottom of the screen
Fixed: Operation warnings popup showing too many messages
Changed: Job report dialog now remembers it’s position and size
Kup online oprogramowanie CNC (wieczyste, imienne oryginalne licencje elektroniczne - jesteśmy dystrybutorem na terenie Polski):
👉SheetCAM,
👉MACH3,
👉MACH4
Nasz sklep oferuje szybkie i bezpieczne płatności (PayU), faktury VAT w PLN. Zachęcamy do odwiedzin naszego sklepu i skorzystania z oferty. Można również poprosić o ofertę pisząc do nas na adres mailowy: [email protected] oraz w wiadomości na komunikatorze Messenger.
Co nowego w wersji V7.0.13 (Stabilnej), która ukazała się w maju?
Naprawiono: Niepoprawne generowanie ścieżki narzędzia
(Eng: Fixed: Not generating toolpaths correctly - oops!)
Kup SheetCam na:
https://epsiron.pl/shop/
******************************
READ THE FULL CHANGELOG:
V7.0.12
Fixed: Plasma should start at the end of the tab if the start point is on a tab
Fixed: Crash if minimum segments for arc fitting is less than 4
Fixed: Incorrect tool paths when ramping open paths with 'reverse open paths' selected
Changed: Tools now have path rules
V7.0.11
Fixed: Sim showing a ramp down to the first cut when 'no move to safe z' is used
Changed: Some changes to try to work around the green stripes issue on some computers.
Fixed: Entering text coordinates in text plugin did not work
Fixed: Shape plugin missing X,Y coordinates
Added: Shape plugin now has 'add to new part' option
Fixed: Error generating tool paths when ramping out of a tab that is very close to the end of the cut path
Fixed: Path rule sets don't always stay deleted when you delete multiple rule sets
Added: Shape library now has 'add to new part' option
Fixed: Missing coolant option in drilling operation
Fixed: Random crashing (at least one of the crashing bugs anyway)
Changed: SVG now has an option for 90DPI or 96DPI
Fixed: Changes in tab width not affecting already placed tabs
Fixed: random warning that you will disable tstart point optimisation in start point mode
Fixed: Many stability fixes to start point options in pinned mode
Fixed: 'Reverse cut direction' in start point right-click menu can put leadin on wrong side or affect other cut paths.
Fixed: SVG showing hidden lines
Fixed: Creating a new part leaves the old part selected
Fixed: DNC tool not automatically sending data
V7.0.10
Fixed: In Edit contour 'move to part' does not work
Fixed: A few more translation issues
Fixed: More arc matching problems
V7.0.9
Fixed: Corner sharpening in pocketing missing some corners
Fixed: Ugly background on some of the sliders
V7.0.8
Fixed: Crashing on close on some computers (for real this time!)
Fixed: Occasional crashing on loading a drawing when in start point or action tab mode
V7.0.7
Fixed: Crashing on close on some computers
Fixed: Input boxes not allowing you to set the caret position with the mouse
Co nowego w wersji V7.1.7 (Deweloperskiej) ?
Fixed: Sometimes locking up on close.
Fixed: Input boxes do not allow you to set the caret using the mouse
******************************
READ THE FULL CHANGELOG:
V7.1.6
Fixed: Names from menus such as move to layer end up in shortcut keys.
Changed: move to layer etc added to shortcut keys. These pop up a sub menu with the layer/part selections.
Fixed: Loading a part can leave other parts selected
Changed: Sliders such as corner threshold now show the value
Fixed: Arc matching making huge circles (hopefuly I actually got it this time)
Changed: Better circle detection when arc matching.
Changed: Improved hint image popup so it tries not to cover other controls
Fixed: Input boxes not selecting when you click on them
Added: Set part position option to nesting (sets focus to part position X box)
Fixed: Shape plugin missing translation in dropdown boxes
V7.1.5
Added: Drawing date to part properties
Added: Popup help images instead of a fixed position image.
Changed: Manually edited names are now auto detected in older tool files.
Fixed: Occasional erroneous large circles when arc matching.
Changed: SVG now supports CSS (Corel SVG files use CSS)
Fixed: Quick load plugin selecting the wrong parts
Fixed: Shape names missing from translation
V7.1.4
Fixed: Tool tables losing custom names
V7.1.3
Fixed: Operation names not showing tool number
Fixed: Operations from older jobs not updating their names
V7.1.2
Fixed: Crash after opening operation table from operation right-click menu
Fixed: Right-click menus not being translated
Fixed: Missing wx translation files
Fixed: Machine and work not displaying when SheetCam is started
Changed: If you cancel adding a rule set, the first rule set is shown rather than disabling the rule list.
Fixed: Grid colour selector always defaulting to black instead of your selected colour
Added: In nesting + mouse wheel will rotate the part
V7.1.1
Fixed: Rotary plugin options not laying out correctly
V7.1.0
Changed: When loading older tool sets you are now asked if you want to keep the tool names
Fixed: Update dialog not sizing correctly
Fixed: Peripheral feed arte rule generating incorrect feed rates.
Removed: Depth of cut in peripheral feed rate rule
Fixed: Editing rules could cause a crash if you cycle between different rules very quickly.
(Źródło: https://www.sheetcam.com/)
Nowa stabilna wersja SheetCam TNG V7.0.7 - dostępna w sklepie online https://epsiron.pl/shop/
W albumie zrzuty ekranu różnych zakładek.
Kliknij tutaj, aby odebrać Sponsorowane Ogłoszenie.
Kategoria
Skontaktuj się z firmę
Strona Internetowa
Adres
Godziny Otwarcia
Poniedziałek | 09:00 - 17:00 |
Wtorek | 09:00 - 17:00 |
Środa | 09:00 - 17:00 |
Czwartek | 09:00 - 17:00 |
Piątek | 09:00 - 17:00 |
Marii I Boleslawa Wyslouchow
Kraków, 30-611
Oferuje szybka i profesjonalna usluge naprawy wzmacniaczy lampowych i tranzystorowych. Posiadam wieloletnie doswiadczenie w naprawie i budowie wzmacniaczy typu Fender, Marshall, Am...
Jasnogórska 69
Kraków, 31-358
W EasyUse możecie kupić produkty takich marek jak Anker, Soundcore, Eufy i Nebula. Każda z nich jest wyjątkowa, ale łączy je wspólna misja ulepszania codzienności i wprowadzania i...
Kraków
Redkey, the Vision & Creation Supplier that makes life easier for you. Redkey provides simple and e