EOS Ambulance

TOYOTA HIACE 2021 MODEL AMBULANCES ARE READY IN OUR STOCKS

Gasoline - Manual Transmission - 20x pcs.

Equipment List is on picture

AMBULANCES ARE READY IN OUR STOCKS

Mercedes Sprinter 317 CDI Manual Transmission Ambulance - 2 pcs in stock.

Mercedes Sprinter 417 CDI Manual Transmission Ambulance - 5 pcs in stock.

Ford Transit 350L Diesel Manual Transmission Ambulance - 7 pcs in stock.

Mercedes Sprinter Ambulance is offered to you by adding intensive care type, emergency aid type and patient transport type medical equipment by being converted into European type and economic type in line with the wishes of our valued users.

Mercedes Sprinter ambulance is preferred by many of our users with its ease of use and widespread service network.

Our Ambulance can be produced with Europan type or Economic type ambulance conversion equipment in accordance with EN 1789 standards according to the wishes of our customers. In addition, our ambulance can be produced with Basic type ambulance conversion equipment.

BASIC TYPE AMBULANCE
The new ambulance design of EOS ambulance, a basic type of ambulance, was presented to our valued customers.
Our basic type ambulance is designed and produced for our customers looking for affordable prices.

Our interior design, which is preferred in regions such as Africa and the Middle East, is preferred by users with its high quality and abundant storage space.

Basic type ambulance design offers complete storage space on the left side of the ambulance. The cabinet system on the left side provides a great advantage for users. In addition, there is a storage area for extra stretchers under the bench where 3 personnel can sit.
You can find the content information of our basic type ambulance briefly below.
There is a long Light Bar at the front of the ambulance roof and a cylindrical light bar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
There is a complete cabinet system made of MDF material on the left side of the vehicle.
On the right side of the vehicle, there is a bench made of MDF material with a capacity of 3 personnel. In addition, the bottom of the bench is used as a storage area for dustpan, stretcher and other materials.
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 long lamps and 2 spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, manual control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input

Our 52-piece Resuscitation Bag is in stock. You can access all the contents in the bag from the pdf file, in addition, a Defibrillator can be added.

https://drive.google.com/file/d/1IHABZBS8WNztLX259ua_2ocxA0BDqw0_/view

Our Box Type Ambulances are preferred by many of our customers thanks to their large interior volume and can be applied to the desired brand vehicle chassis. Our body, which is used in the production of Ambulance, is made of steel profiles, the casing is covered with ABS coatings, styrofoam and insulation foam are used between the coating.

Reinforcement sheets are added between the coating for the assembly of medical materials that will be preferred by our customers in our Ambulance.

Ambulance in the box type with a large interior volume.
Ergonomic seating for two patients’ treatment.
Optional accessories include a patient stretcher and a platform for the stretcher.

Oxygen cylinders may be replaced from the outside
Cabinets for medical devices and equipment made of foam board.
LED type lights, LED type spotlights, a handle, I.V. holders, a syringe pump installation space, and an oxygen socket in the ceiling are all found on the ABS-covered console.

Foldable doctor seat at left rotatable towards main stretcher and vehicle driving direction, doctor seat at the front, and foldable doctor seat at right rotatable towards main stretcher and vehicle driving direction.

Cabinets with shelves for medical devices.
Sockets for oxygen and vacuum.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.

Toyota Hiace ICU has all the medical equipment necessary for intensive care in the ambulance. ICU AMBULANCE equipment, patient monitor, defibrillator, ventilation device, ambulance syringe pump, ambulance emergency stretchers and cardiac monitor devices are included.

There is a 2000w inventor device in the ambulance to operate the 220v requirement in the devices. In addition, there is a rectifier device required to charge the battery from the outside, these devices are located in the ambulance patient cabin board.
Hiace ambulance is high roof, no subsequent addition, complete fabrication.

Ambulance has a special type of air conditioning cooling system that can do enough cooling in hot climates. The climate control system can be easily provided in the control system in the driver’s compartment and passenger section of the car. In addition to air conditioning, a special water type heater system can be installed in the ambulance if desired.

EUROPAN TYPE AMBULANCE

High-Quality ABS Molding System Ambulances
EOS Ambulance responds to your valuable requests with its Europan Type ambulance conversion in accordance with the European ambulance standard EN 1789 norms, produced with a mould system at high standards.

Our right left and ceiling coverings are assembled with a solid mould and rounded edges in the Europan Type ambulance conversion. All moulds are made of ABS material and comply with European standards, offer ease of use and high-quality thanks to the ABS mould system.

There is a long Light Bar at the front of the ambulance roof and a short Lightbar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
Back-area lighting with projectors
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
Single-piece in ABS form cover, an oxygen cylinder chamber, oxygen and suction system, and medical gadget cabinet on left side
Single-piece in ABS form covering, a functional doctor seat, a chair stretcher chamber, and the possibility to connect a spine board to the right side
Round-corner moulded system
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 LED type long lamps and 2 LED type spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input

Nissan Urvan Ambulance is our product that is in demand as an alternative to our Toyota Hiace ambulance from Africa and the Middle East regions. With its ergonomic structure and preferred on narrow roads and in areas with dense urbanization.

Nissan Urvan Ambulance right, left and ceiling coverings are made of ABS, and the cabinets are made of foam board or MDF lam material according to the preferences of our customers.

Three separate noises are produced by a multi-tone siren controlled by the driver.
The vehicle is sound and temperature insulated, with supporting sheets for added strength.
In the patient cabin, there is antibacterial, washable, non-slip flooring.
Various color options are available on the inside of the patient cabin (according to customer preferences)
A functioning cabinet system composed of MDF or foam-board material is located on the left side of the patient cabin (according to customer preferences)
A squad bench with under-seat storage is located on the right side of the patient cabin.
The lighting system includes fluorescent and spot lamps, as well as secondary air conditioning, an auxiliary battery, a control panel, and internal communication.
Customer-specific printing and labeling on-board the vehicle.

- Mercedes Sprinter Diesel Manual Transmission Fully Equipment Ambulance

- Ford Transit Diesel Manual Transmission Fully Equipment Ambulance

Ambulances Are Ready In Our Stocks

Included Equipment List on Below:

Main Stretcher
Scoop Stretcher
Chair Stretcher
Spine Board
AED Defibrillator
Portable Suction Unit
Oxygen System
2x10 LT Oxygen Clinder
Emergency Bag
Neck Collar Set
Stethoscope
Sphygmomanometer

Toyota Hiace Ambulance has the proper equipment in order to intervene in emergency situations and carry patients. There is left, right, and ceiling covering in the ambulance cabinet part.

Cabinet internal equipment is designed as being proper to En1789 norms. Hiace ambulance can be manufactured as not only diesel but also gasoline. There is hot and cold air-conditioning in the ambulance in order to use it in hot and damp regions. Hiace ambulance covering consists of one piece of abs material.

There is an inverter device in order to procure 220v electricity. The whole electrical system used in the ambulance is agreeable with ISO 67221 standards. The installation used in the ambulance has different shapes and colors with the vehicle’s own installation. The cable connectors and the sockets used in the ambulance are manufactured as compatible with EN ISO 8092-1, EN ISO 8092-3, EN ISO 8092-4 norms.

There is a 180 ah additional replacement battery that provides electricity to medical devices in the ambulance. Also, there is a rectifier device, located under the passenger seat in the driver’s compartment, that can be charged with the ambulance’s replacement battery.

In order to support the vehicle’s replacement battery, the ambulance’s batteries can be charged with 220v input socket, based out of the ambulance, in case the vehicle’s engine is not in motion. This type of use allows the utilization of medical devices in the vehicle even the ambulance is not in motion.

AMBULANCES ARE IN OUR STOCKS AND READY FOR SHIPMENT

Fiat Ducato Diesel Automatic Transmission Ambulance 2020 Model Years

Fiat Ducato Diesel Manuel Transmission Ambulance 2020 Model Years

GMC Savana is our preferred model in American Type II ambulances. Especially in the countries of the Arab region and South America, gasoline and automatic transmission models attract attention.

GMC Savana fibreglass material mould cabinet system and is made of ABS material covering the ceiling. The upper part of our vehicle has been specially raised. The Lightbar is manufactured with a special mould system. Indoor and outdoor lighting is LED type.
Ambulance electrical installation interior and exterior lightings are manufactured in high quality.

The roof of our ambulance vehicle was raised using special fibreglass material. Thanks to this ceiling elevation, the use of the vehicle as an ambulance has become more ergonomic. This upgrade was accomplished with meticulous engineering.

Fiat Doblo Ambulance is a new product of our company. Developed and produced by our production department in line with the demands of our customers, Ambulance also attracts attention from our other customers.

Thanks to its small structure, it can act as a pioneer ambulance in cases where emergency response is required, as well as providing the opportunity to transport the patient when necessary.

The interior of Ambulance is made of ABS coating, and our cabinets are made of foam board material. Thanks to its low cost and easy use, Fiat Doblo Ambulance is our new trend.

Volkswagen Transporter ambulance is like all our ambulances that we manufacture, the right, left and ceiling surfaces are covered with ABS material.

Cabinets can be manufactured from foam board or MDF lam material according to the preference of our customers.
The floor of our Volkswagen Transporter ambulance can be coated with non-slip and anti-bacterial Epoxy or non-slip and anti-bacterial PVC according to customer preference.

The electrical installation and control panel of the ambulance has been designed to meet the system’s requirements and be user-friendly. The headlights of all our ambulances are LED system and can be used in the desired color and size according to the customer’s preference.

Toyota Land Cruiser 4 x 4 ambulance used in harsh weather and road conditions is the reason of choice with its affordable cost and low maintenance fee. In many countries other than the African region, ambulance is preferred for emergency interventions in rural areas.

Internal lighting is specially designed to provide the ambulance officer with the most appropriate patient intervention. Storage areas inside the Toyota Land Cruiser 4×4 ambulance have been designed to meet the needs of ambulance officers and to establish the most appropriate system in the restricted area.

Toyota ambulance includes all of the following emergency relief equipment, as well as an ergonomic design for ambulance officers to intervene in patients inside the vehicle.

Our Jeep brand 4×4 ambulance is one of our preferred models for on-site intervention and transfer to the nearest healthcare institution in difficult geographical areas and regions with difficult roads.

Jeep 4×4 ambulance is also an ambulance that can be used for transportation to the patient in geographical regions where winter conditions are intense.

It contains all the emergency aid medical equipment and the main stretcher required for on-site intervention to the patient. In addition, a portable oxygen set and AED type defibrillator can be added to the medical equipment.

As EOS ambulance, our aim is to create a system that users can benefit most in a limited area in our ambulance. In the feedback from our users, they stated that the Jeep 4×4 ambulance is very useful for on-site intervention and for transporting the patient to the nearest health institution.

Hyundai H350 Ambulance

Hyundai Ambulance is produced with our Europan type and Economic Type ambulance conversions, just like our ambulances of other brands and models that we offer and manufacture to our customers. Hyundai H350 is a vehicle that complies with the European standard EN 1789 norms.

Hyundai ambulance is among the new preferences of our customers with its strong chassis and affordable cost.

Mercedes Sprinter 4x4 Fully Equipment Ambulance in Eos Ambulance stocks.

Ambulance is ready to be transported immediately according to your order.

Mercedes Sprinter Manuel Transmission Diesel With Fully Equipment Ready in Stock.

We presented the Fiat Ducato ambulance with its powerful chassis and engine to the preferences of our valued customers.

It has been preferred in many low-budget projects with its economical price. With its structure in accordance with EN 1789 standards, Europan type or Econimic type ambulance conversion equipment can be used in production according to the preferences of our customers.

Fiat Ducato ambulance is one of the leading vehicles that can be selected as an ambulance with its diesel 2300 cc engine volume and 140 HP power. Manual and automatic transmission options are available.

The Mobile Dental Unit, which is included in the Mobile Health vehicle of EOS Ambulance, has been designed in the most comfortable way for users and patients.

Our Mobile Dental Unit can be manufactured on Panel Van vehicle, Box Type Vehicle or container. There are accessories for the dental chair unit and the necessary air and water systems for the unit.

The features of the dental chair can be preferred by our customers as they wish. In addition, according to the type of vehicle (Panel Van, box, container) where the Mobile Dental Unit will be manufactured, the workbench can be placed in the cabinets according to the available space inside. If desired, a lift for the disabled can also be connected to the vehicle.

The right, left and ceiling is made of ABS coating, and the cabinets are made of foam board material. These products are preferred due to their easy cleaning and long-term durability.

Mercedes Sprinter 4x4 ambulance ready in stock.
Currently, you can receive your Mercedes Sprinter 4x4 ambulance order in 8 months at the earliest.

Mercedes Sprinter 4x4 Ambulance is ready to be transported immediately according to your order.

MAN Emergency Ambulance is a type of ambulance based on the chassis that represents all the established standards of the WAS brand in our structure.

It has excellent equipment built by combining excellent use of space with the highest requirements for security and technology. It is easily accessible from the external storage compartment thanks to the rescue equipment and transport seat found in our Ambulance.

Ambulance we have also a bag cabinet also offers customers the possibility to remove two emergency bags or backpacks from outside the vehicle. Ergonomics and safety are also considered in every detail of the interior. The patient compartment offers optimal sanitary working conditions and sufficient space provided for a comfortable treatment of the patient.

The new was Design warning system is available, allowing patients and healthcare workers to reach more safely thanks to better visibility from the front and side. Teherewithal our ambulance provide door assistance with optional support systems creates a great effect to help load a lot and facilitate the daily work of mobile emergency service personnel with Intelligent Control.

As EOS Ambulance, we are serving our customers in Egypt with a new project. It decided to purchase a mobile mammography trailer as part of the campaign launched to combat breast cancer in Egypt. In the negotiations we had with our customers, an agreement was reached on the mobile mammography trailer, the drawing of which was included.

The Egyptian Ministry of Health has started a study for the control, diagnosis and treatment of breast cancer in the country. Within the scope of this study, it started to work to reach every region of the country and to buy a mobile mammography trailer to fight breast cancer in the region. As a result of this work of the Egyptian Ministry of Health, our company contacted EOS Ambulance for the project.

Production started for the mobile mammography trailer, the drawings of which were prepared. After the production of the trailer is completed, production will be started for its interior design. The floor of the trail will be covered with epoxy considering the comfort of patients and employees. After sound and heat insulation is made on the inside of the sidewalls, sheet reinforcements will be made for the fixation of cabinets and other materials. ABS material coating will be applied to it.
The entire cabinet system inside the mobile mammography Trailer will be made of foam board material. In accordance with the movable system, the cabinets will have a lock system for their drawers and doors. All items and equipment to be placed inside will be fixed and made suitable for the mobile system.

In the interviews with our Egyptian customers, it was stated that this tool will be used effectively for the control and follow-up of breast cancer cases in Egypt.

There is also a truck with a operating room trailer and there is an operating room in the middle of the trailer. The entrance to the operating room can be reached by stairs from the rear of the vehicle. In the operating room, patients first undergo examinations and diagnoses in the waiting room when they enter the vehicle, and then they can enter the examination room if needed. In the operating room, there is an LED light system with a night mode feature as special interior lighting in the examination room. The gynecological seat in the mobile operating room is designed for examination and is ergonomic. The mobile operating room also has enough specially produced stainless steel cabinets, medical waste bins, medical devices, and medicines.

📢📢
Our Mercedes Sprinter vehicles, which we can produce and deliver in 2 weeks based on your order, have arrived in our stocks.
Mercedes Sprinter 317 Diesel Manual Transmission LHD Ambulance
📢📢

📢📢
Both of our ambulances are ready. It can be shipped immediately based on your order.
Please contact us for price and information.
Fiat Ducato Diesel Manual Transmission Fully Equipment Ambulance
Fiat Ducato Diesel Automatic Transmission Fully Equipment Ambulance
Medical Equipment Content
defibrillator
ventilator
Injector Pump
Main Stretcher
Dustpan Stretcher
Chair Stretcher
Spine Board
First Aid Kit
Resuscitation Bag
Emergency Birth Set
Burn Set
Adjustable Collar Set
KED Vest
Transition Splint Set
Air Splint Set
Co**se Bag
Head Immobilization
📢📢

KOSOVO'S PREFERENCE FIAT DOBLO AMBULANCE Kosovo is one of the newly developing European countries and continues to invest in healthcare. Due to country roads and city structuring, Fiat Doblo prefers vehicles as ambulances for rapid response to cases. Since our Fiat Doblo ambulance is limited in terms of patient space, we designed it as erg...

The traction splint set is used in cases such as nerve damage in leg fractures, bone protrusion or force. The traction splint set is fixed to the broken leg, separating the broken bones from each other, preventing nerve damage or the bone from coming out of the skin, reducing the patient’s pain.

There are 4 leg ties to fix the leg. Made of strong metal material.