Ox-Cetane

We then added 15ml of Ox-cetane directly into the fuel supply to give the desired balance of 1ml to 1 gallon of fuel and allowed the car to idle for 5 minutes giving the fuel enough time to mix. You can see here the results of the dynometer test after we used just 15ml of Ox-cetane. We then proceeded to do a direct comparison test using the exact same procedure as the previous test. We saw a 59% reduction in CO emissions from this vehicle.
From an original value of 0.12% CO, the figures dropped to just 0.05% CO.
Conclusion:
We have seen on this vehicle a drop in emission of over 50% and a reduction in HC of over 40%.
When this is combined with the power increase of 10hp and 9lbs/ft of torque, we can make only one recommendation. Ox-cetane should be used wherever and whenever possible on a this vehicle as the results speak for themselves. Restoring Mpg’s back to factory standards.

Air entrainment is a problem in refined fuels. It can occur anywhere in the fuel supply chain, from the refinery to the vehicle’s fuel tank. This issue has several consequences, including reduced engine performance, increased emissions, and potential damage to engine components due to cavitation.

The Benefits of Oxytane:
- Fuel lubricity is improved because fuel with less air in it has better load bearing capacity.
- Solvation Properties are returned and the fuel does a better job of cleaning.
- Fuel temperatures are reduced because there is less dissolved air/gas in the fuel.
- Energy density of the fuel is improved because there is less air/gas in the injected fuel.
- This is particularly useful when diesel fuel has been adulterated with Kerosene or Biodiesel.
- Reduces fuel aeration in the fuel tank.
- Minimizes fuel cavitation in the fuel system.
- Cleans out engine carbon deposits/reduces smoke emissions.

We all recognize the problematic issues with air in the fuel.
Fuels are naturally thirsty for atmospheric air as a dry sponge for water. (This is referred to as entrained air). Diesel fuel being the thirstiest. Ox-cetane treats all types of fuel. Gasoline/petrol, diesel, biodiesel, kerosene, alcohol and nitromethane. The only function Ox-cetane performs is to improve the fuel air release properties. Ox-cetane is chemistry, which reacts in fragments of seconds. The fuel instantly becomes a cleaner, coolant, lubricant and creates energy.
The fuel then “Maximizes” as a solid liquid fuel. For more information go to https://ox-cetane.com/

Many drivers are unaware of the gradual decline in fuel economy and engine performance in their vehicles. This decline can be subtle and happen over time, making it difficult to notice. Even a small decrease in fuel efficiency may not be apparent in everyday driving. Computer-controlled engine management systems can mask these declines by adapting to changes in performance. This can give drivers a false sense of everything being alright, even if the engine is not operating optimally. Factors such as driving habits and conditions also impact fuel economy and performance.
Regular maintenance is essential in preventing or minimizing these declines.
While not all drivers are oblivious to these issues, there is a spectrum of awareness, and technology plays a role in masking the problem. Pay attention to your vehicles ECU !

Just tried Ox-cetane fuel additive in my 2005 BMW 740 l and the results are mind-blowing! My car feels like it’s brand new again! It cleaned out all the debris and sludge from my engine, giving it a boost in performance and power. I may not understand the science behind it, but the difference is undeniable. My car has the get up and go factor that it hasn’t had in years. Highly recommend giving it a try!

“The challenges of solubilized oxygen, dissolved and entrained air in gasoline and diesel fuel are often overlooked, but they can have significant negative effects. These contaminants are not as visible or well understood as other fuel contaminants, making it difficult to identify and quantify them. The research on their effects is also limited. Removing solubilized oxygen and air from fuel is challenging due to their tight binding to fuel molecules. These contaminants can lead to reduced engine efficiency, increased fuel consumption, emissions, corrosion, and reduced fuel stability. It’s time we pay attention to these issues for better fuel performance. ”

Wishing all our amazing customers a very Merry Christmas! We hope your holiday season is filled with joy, love, and laughter. And a special thanks for your support,to spread some festive cheer!

Ox-Cetane is a game-changer for Uber and Lyft drivers! Restore your vehicle’s maintenance with Ox-Cetane, enhancing fuel performance and energy density. Say goodbye to aeration and cavitation, and hello to improved fuel economy and engine performance.

Solubilized oxygen and entrained air can be considered problematic in modern-day refined liquid petroleum fuels. They can lead to fuel degradation and various issues, even though they are not readily visible. Fuel aeration occurs when air bubbles become trapped within the fuel, disrupting its uniform density and flow. This can lead to incomplete combustion, erratic fuel delivery, and increased wear and tear on fuel system components. Fuel cavitation can have several impacts, including:

1. Erosion and pitting: The violent collapse of the v***r bubbles can erode and pit metal surfaces on fuel system components such as injectors and pumps. This can lead to leaks and decreased performance.

2. Noise and vibration: Cavitation can generate loud knocking or rattling noises, as well as engine vibrations. These can be disruptive and indicate potential issues with the fuel system.

3. Reduced fuel flow: The formation and collapse of v***r bubbles can disrupt the smooth flow of fuel, leading to decreased fuel delivery. This can result in fuel starvation and affect the overall performance of the engine. Ox-cetane’s unique hydrogen bonded chemistry reduces the voltage generated in flowing fuel, resulting in a significant reduction in surface tension. This improves the air release properties of the fuel, reducing air contamination. Fuel with less air contamination stays lubricated longer, improving solvation/cleaning properties and reducing carbon deposits. Lower surface tension also reduces fuel cavitation and improves fuel droplet dispersion during injection. Restoring fuel economy back to factory standards .

“Did you know that reducing air in fuel has multiple benefits? Improved lubricity, enhanced solvation properties, lower fuel temperatures, increased energy density, and effective cleaning are just a few advantages. It’s especially useful when dealing with adulterated diesel fuel and gasoline . Restoring the vehicle back to factory standards.Say goodbye to fuel aeration, cavitation, and engine carbon deposits! ”

Testimony :Just added Oxcetane to my 2016 Ford F250 and the results are mind-blowing!Engine woke up, turbos spooling, and the ride is now incredibly smooth. Plus, my fuel needle seems to be moving at a snail’s pace.Restoring my Mpg’s Overall, Oxcetane enhances engine performance, power, and efficiency. Can’t help but love this fuel treatment!

Just added fuel treatment to my 2019 Chrysler 300 S and I’m blown away by the results! After driving 566 miles, my MPGs went from 20.1 to 24.7 and my car is running more efficiently, smoother, and quicker than ever. It feels like a brand new ride! So excited to have found a product that really works.

Let’s talk about incomplete combustion and what factors can contribute to it.
Some common reasons for incomplete combustion include insufficient air supply, poor mixing of air and fuel, low temperature, and short residence time in the combustion chamber. This can result in increased emissions and decreased fuel efficiency. It’s important to address these issues to ensure your vehicle is running smoothly and efficiently.

Ox-cetane testimonial : Just got my Ox-cetane today and decided to give it a try. Put 15ML in my tank and ran my car for about 10 minutes. To my surprise, the vibrations that I thought were just a normal part of having a Mustang GT disappeared. & 1 also noticed that my idle tach dropped from
1000 rpm to 4-500, and the power band in my car seems to have improved between 40 and
50 MPH in 2nd gear. It’s like a tune-up in a bottle! I’m amazed at how just a small amount of this stuff can make such a difference in the way my car runs for the better. -cetane

Ox-cetane testimonial: “Just wanted to share my experience with Ox-cetane! 🚗 I rented a Chrysler Pacifica with low mileage and it drove fine, but after adding a 30ml bottle of Ox-cetane to a full tank, it felt like a whole different vehicle! My MPG’s improved and I couldn’t believe the difference. I’m a believer and will be using this product on all my future rentals. ”

The unique Ox-cetane hydrogen bonded chemistry reduces the voltage generated in flowing fuel. The result is a significant reduction in the surface tension of the flowing fuel, Improving the air release properties of the flowing fuel providing a more pure fuel with less air contamination.
Fuel with less air contamination stays wetter longer This also improves the fuels own natural solvation/cleaning properties
which helps reduce and clean up carbon deposits that reduce fuel efficiency.
Lower surface tension also reduces fuel cavitation and improves fuel droplet dispersion of the injected fuel.

Mechanics claim 30% of the fuel injectors in new engines in the school bus fleets they have worked on were blown off their injectors tips . Pushing fuel pressures to 30 k and pushing aerated fuel Thur a whole you can not see with the naked eye is a recipe for blown injectors tips . This is the “cutting torch effect “ . The proper term is fuel cavitation. “Cavitation Damage” By removing the entrained air from the fuel , resulting back to factory standards.

I wanted to thank you for introducing me to Ox-cetane. Instead of having to clean my injectors on my 2012 VW CC, you advised I use Ox-cetane over two consecutive tank fulls . I did so and was so impressed with the
improvement in engine performance that I added it to my other car as well...and experienced the same kind of improved engine performance. Both cars run smoother...no engine noise, better pick up and better gas mileage Wow !! The check engine light on the VW went out without any
further maintenance and has not come back on.
I’m hoping I can get a regular maintenance supply of the Ox-cetane for both my cars. What a difference a good cleaning agent makes to an automobile engine.

The unique Ox-cetane hydrogen bonded chemistry reduces the voltage generated in flowing fuel. The result is a significant reduction in the surface tension of the flowing fuel, Improving the air release properties of the flowing fuel providing a more pure fuel with less air contamination.
Fuel with less air contamination stays wetter longer This also improves the fuels own natural solvation/cleaning properties
which helps reduce and clean up carbon deposits that reduce fuel efficiency.
Lower surface tension also reduces fuel cavitation and improves fuel droplet dispersion of the injected fuel.
Ox-cetane is not a fuel additive as it adds nothing to the fuel Ox-cetane is undetectable in diesel fuel, kerosene or gasoline/petrol
Ox-cetane D-975 and EN590 tests show zero change in fuel specs
Ox-cetane is registered with USEPA and considered substantially similar (a pure fuel)
Ox-cetane treat rate is usually 1 ml per gallon of fuel in it’s concentrated form (requires a syringe)
Ox-cetane is a Anti-Cavitation fluid that improves the release of microscopic air and v***r bubbles in the fuel.
Ox-cetane lowers the voltage which reduces the surface tension and allows the microscopic bubbles to escape. There’s NOT other additive on the market that works like this .

Solubilized oxygen and dissolved air in diesel fuel and gasoline contribute to carbon deposit accumulations in the internal combustion engine through three main mechanisms: 1. Oxidation: Solubilized oxygen reacts with the fuel and combustion byproducts to form carbon monoxide, carbon dioxide, and water.
These products can then deposit on the engine components, forming carbon deposits.
2. Polymerization: Dissolved air in the fuel can promote the formation of polymers, which are long chains of molecules. These polymers can deposit on the engine components, forming carbon deposits.
3. Degradation: Solubilized oxygen and dissolved air can degrade the fuel over time, forming gums and varnishes. These gums and varnishes can deposit on the engine components, forming carbon deposits.
The rate at which these mechanisms occur is affected by a number of factors, including the fuel composition, the engine operating conditions, and the presence of additives. Ox-Cetane improves the air release properties of diesel fuel
This results in improving the fuel lubricity, eliminating fuel aeration, fuel cavitation, improves cetane and improves the energy density of the injected fuel Restores lost fuel economy, engine performance and emission profiles.

No such thing as a fuel catalyst. There is no product made today that can be added to the diesel fuel or gasoline that can improve the engine performance, fuel economy or lower the emissions more than the OEM promised the day they sold the car new. Nothing. The question one should be asking is: How much fuel economy have I lost? The USEPA has published a book every year since 1974 on fuel economy estimates for cars sold new in the year, they are sold new. Ox-Cetane improves the air release properties of the injected fuel. Fuel with no air dissolved in it has really good solvation properties. This fuel cleans out the carbon deposits restoring some of the fuel economy and performance that has been reduced by emission control systems, driving cycle, engine oil volatility, maintenance schedules and dissolved and entrained air in the fuel. The air in the fuel problem is made worse when on understands the fuel system is a poorly designed hydraulic system contributing more air to the fuel. Using 1 millimeter of Ox-cetane to 1 gallon of fuel X your tank capacity. Restoring your vehicle to factory specifications.

Testimonial: 2016 Ford F150 with 150K plus miles restoring the MPGs back to factory standards Avg14 MPGs The truck was running great already it restored to 1 mpg with no load driven regularly, smoother , quicker, quieter and more throttle response. Just cleaning out the fuel -cetane

We all recognize the problematic issues with air in the fuel.
Fuels are naturally thirsty for atmospheric air as a dry sponge for water. (This is referred to as entrained air). Diesel fuel being the thirstiest. Ox-cetane treats all types of fuel. Gasoline/petrol, diesel, biodiesel, kerosene, alcohol, all-the-way to nitromethane. The only function Ox-cetane performs is to improve the fuel air release properties. Ox-cetane is chemistry, which reacts in fragments of seconds. The fuel instantly becomes a cleaner, coolant, lubricant and creates energy.
The fuel then “Maximizes” as a solid liquid fuel. -cetane

Testimony/ I wanted to give you and update on our use of Ox-cetane in my sport fishing vessel. I run a pair of Caterpillar 3208 T/A diesel engines and an Onan 8K generator. Within a few minutes after adding Ox-cetane we experienced a noticeable change in the decibel level of the generator. The sound dropped to the point where one had to actually listen to know that the generator was operating. There was also a noticeable “smoothing” of the main engines. In general vibration and pitch all decreased. The most noticeable effect was the lack of visible emissions or diesel smoke while we were underway. As you know, we have always had an issue with soot build up and unburned fuel, this literally disappeared once we added Ox-cetane . Additionally, it should be noted that our RPMs increased 100+ revolutions. I would have to say that Ox-cetane is going to be a “must” additive for us. #3208 #

I tested Ox-cetane in my 2014 Ford Escape
EcoBoost with 33,800 miles on the odometer while helping my daughter move into her new house. It wasn’t a perfect head-to-head test on identical routes, but the routes were similar.
Route 1 without Ox-cetane: approximately 60 miles on a freeway and 45 miles on surface roads.
Average surface road speed 45 mph with few stop lights.
Route 2 with Ox-cetane: approximately 60 miles on freeway followed the next day by 30 miles on surface roads. Speeds 45-55 mph. A few more stop lights than Route 1.
Subjectively, wIthin about 15 minutes the engine felt smoother and peppier, although there are no data points to compare.
Gas Mileage Route 1: 22.68 mpg.
Gas Mileage Route 2: 29.27 mpg.

Ox-cetane testimony : I bought the truck 2018 RAM 1500 ST in May 2023. The MPG read 17.2 maybe 17.4. In July 2023 I put my first 20 ml of Ox-cetane in my tank. Took it to the highway to RUN IT. It went up to 19.4. Then the second dose of Ox-cetane was the day I left for Florida from Las Vegas. It hit 20.1. Today. 10-07-2023 it reads 24.5!!! Ox-cetane is the new product on the block!!! It’s the real deal . Restoring your MPGS.

High pressure fuel return to tank (HPFRTT) systems in fuel injection systems can contribute to air/oxidation problems in refined petroleum fuels in a number of ways.
• Air entrainment: When fuel is injected into the engine at high pressure, some of the fuel can be pushed back through the fuel injector and into the fuel return line. This can entrain air into the fuel system.
• Fuel volatility: HPFRT systems can increase the volatility of fuel. This is because the fuel is exposed to more air and heat as it circulates through system. Volatility is the tendency of a liquid to v***rize. Higher volatility fuels are more susceptible to oxidation.
• Fuel degradation: HPFRTT systems can cause fuel degradation. This is because the fuel is exposed to more oxygen and heat as it circulates through the system. Fuel degradation can lead to the formation of gum and varnish deposits. Ox-cetane corrects these problems. Go to www.Ox-cetane.com

1. Fuel lubricity is improved because fuel with less air in it has better load bearing capacity
2. Solvation Properties are returned, and the fuel does a better job of cleaning
3. Fuel temperatures are reduced because there is less dissolved air/gas in the fuel
4. Energy density of the fuel is improved because there is less air/gas in the injected fuel
5. This is particularly useful when diesel fuel has been adulterated with Kerosene or Biodiesel.
6. Reduces fuel aeration in the fuel tank
7. Minimizes fuel cavitation in the fuel pump and fuel system
8. Cleans out engine carbon deposits

ENERGY LIBERATING FUEL SAVER"
• Saves: fuel and money
• Reduces: cost or maintenance:
• Lowers: pollution (emission and noise) Increases: efficiency, capacity, engine life;
and restoring mpg’s back to factory standards and much more