Spot On Spot Heating & Cooling Solutions

New home for construction / (4) 10kw salamander electric heaters out for rent … 240V / 1 phase 40amps with 6/3 cable …

providing heat / AC / Air Solutions - With winter time coming up don’t wait to call - (4013910632 ) and get your equipment rental and fight back the worst of climate conditions to keep your jobs up and going and working conditions at a climate you need.

OCEANAIRE 2OACH SERIES

Need a unit that's combo ...
Oceanaire's 20ACH is a portable air conditioning that can provide emergency heat and emergency cooling capabilities. This unit offers the utmost in commercial and industrial heating and cooling power and efficiency. Whether you're up against the coldest winter or hottest summer, the 20ACH is an American made emergency heat and cooling unit that will deliver - year after year.

5 ton - spot cooler / 208volt / filtering and providing clean ac

Classic Plus 14 / 115volt / One ton application / This picture shows two units doing their job and that's extracting any hot air or moisture out of the room and making cold air cooling the room temp down to a potential 65 degrees (lowest).

Knowing what kind of application, you need to perform a job is very important, here we aren't exiting the heat through the ceiling tile anymore to exit hot air to make cold but to exit warm air to the spilled / wet area to dry and eliminate and moisture or wetness to prevent any molding.

Having any questions about the equipment you're seeing here @ S.O.S please reach out with a direct message and ask us any questions regarding equipment and or applications for the equipment.

- KPO 25-43
Cooling Capacity25 ton 270,000 Btu/h
Max Supply/Cold Duct Length75' ea. supply & return
Max Hot/Exhaust Duct Length100'
Voltage/Amps ()460 3-Phase
Amps (A)59.4

- KPO 12-43
Cooling Capacity12 ton 135,000 Btu/h
Max Supply/Cold Duct Length75' ea. supply & return
Max Hot/Exhaust Duct Length100'
Voltage/Amps ()460 3-Phase
Amps (A)27.7

- KPO 12-23
Cooling Capacity12 ton 135,000 Btu/h
Max Supply/Cold Duct Length75' ea. supply & return
Max Hot/Exhaust Duct Length100'
Voltage/Amps ()208/230 3-Phase
Amps (A)63.25 / 57.5

- KPO 05-43
Cooling Capacity5 ton 60,000 Btu/h
Max Supply/Cold Duct Length50' ea. supply & return
Max Hot/Exhaust Duct Length65'
Voltage/Amps ()460 3-Phase
Amps (A)14

KWIKOOL FAMILY

- KPO 05-21
Cooling Capacity - 5-ton 60,000 Btu/h
Max Supply/Cold Duct Length50' ea. supply & return
Max Hot/Exhaust Duct Length65'
Voltage/Amps ()208/230 1-Phase
Amps (A)37.5 / 34.1

Smaller units that use a standard outlet are typically simple to install. Installation of higher-voltage units requires an electrician.

Ease of installation depends on several factors, including room placement, where the hot air duct will be vented and how the condensation water will be managed. Contact an expert to avoid problems with ductwork, drainage and airflow.

Spot cooling AC units remove anywhere from 1 ton to 5 tons of heat per hour depending on the size of the unit.

Spot coolers are sized by tonnage or Btu. A ton describes how much heat a unit can remove in one hour. Heat is measured in British thermal units (Btu), and a ton is the equivalent of about 12,000 Btu.

A 1-ton unit can cool a 400 square-foot space, a 2-ton spot cooler can cool about 800 square feet and 5-ton unit can cool about 2,000 square feet. Variables other than square footage will affect the Btu needs. They include the ceiling height, the number of windows, the degree of insulation, the outside temperature and humidity and the number of people or computers in the space.

In certain situations, it’s smarter to go by cubic feet instead of by square footage. One example is a warehouse stocked with temperature-sensitive items stored on elevated racks.

It’s important to size your spot cooler correctly. If it’s too small for the space, it may never shut off, causing the evaporator coil to freeze up. The same thing can happen if you set the thermostat too low.

Common uses for spot coolers
Spot cooling units have countless applications.

Robust cooling on short notice: Spot coolers provide temporary cooling when an HVAC system fails or underperforms. When businesses with critical cooling requirements, such as food suppliers and pharmacies, need robust emergency cooling on short notice, spot coolers fit the bill. They can be used to augment existing cooling systems in healthcare settings and retail settings during a heat wave.

Special events: Spot coolers can be deployed during special events in venues that have no cooling or have insufficient cooling.

Data centers and server rooms: Spot coolers can be an excellent choice for server rooms and data centers because cool, dehumidified air can be routed directly to the equipment.

Production floors: Spot coolers are ideal for targeting specific areas within a much larger space. For example, it’s impractical to cool a million-square-foot production facility but cooling a production line where the workers are standing makes sense.

Tall buildings: When a large portable air conditioner would require too much ducting, a spot cooler are the logical choice. For instance, running ductwork to cool one floor of a tall office building would be labor-intensive, but spot coolers can be positioned where they are needed. An added benefit: When cooling needs change or a workspace moves, you can easily relocate the spot cooler.

Types of spot coolers

There are several types of spot coolers, including air-cooled models, heat pump models and water-cooled models.

-Air-cooled spot coolers:
Air-cooled units are the most common type of spot cooler. In air-cooled units, the warm condenser air is vented through a duct.

-Heat pump spot coolers:
Heat pump spot coolers are similar to air-cooled spot coolers, but in addition to working as an air conditioner, they can also work as a heater. They must be hardwired by a qualified technician.

-Water-cooled spot coolers:
Water-cooled spot coolers use a water source instead of a condenser to remove hot air. That means there’s no condenser air discharge. Water-cooled units work well when there’s no good way to duct out waste heat.

How does a spot cooler work?
Spot coolers work much like air conditioners. In an air-cooled spot cooler, air is drawn into the unit and across two sets of coils, first the condenser and then the evaporator.

In the condenser, the gas refrigerant, which has been pressurized by the compressor, is turned into a warm liquid. Some of the heat exits through vents in the unit; a duct is usually installed to carry it out through a window, door or ceiling panel. Warm air then passes into the evaporator, which cools the air and removes moisture. The cool, dehumidified air is pumped back into the room through nozzles, which direct the air where you want it to go.

The cooling process creates condensation. That water drains into a bucket, which in some units must be emptied manually. Alternatively, the water can be captured by a drainage hose and directed into a drain or outdoors.

What is a spot cooler?
Spot coolers, also called spot air conditioners or spot cooling AC units, are self-contained portable cooling units that deliver targeted cooling to rooms, equipment or people. Most units roll on casters and plug into a wall outlet, so you can place them where you need them.

LARGE PROJECTS & BUILD-TO-ORDER

- Air Conditioners
20 to 40 tons
Reheat available
Industrial High Static Units

- Cooling Towers
50 to 3,000 tons
Fluid coolers
Evaporative condensers

- Chillers
Up to 1,500 tons
Air and Water-Cooled
Industrial to -40 degrees

- Air Handlers
6,000-88,000 cfm
High Static Available

- Generators
30 to 2,000 kW
Internal/external tanks
Industrial heat.

-Industrial Heat
Electric 15 to 360 kW
Indirect gas fired boilers 80,000 to 4,500,000 Btu/H boilers

For heavier duty requirements, we work with our rental fleet suppliers to purpose-build larger portable units. We also team up with several design build partners and can configure machines to meet your specific need. More compact designs, higher static capabilities and lower ambient operations are just a few of our common requests.

it’s important now more than ever to ensure your workspaces have the highest air quality possible. S.O.S is by your side with a lineup of high-quality portable solutions for rent!

these units can help you maintain a healthy indoor air quality.

KWBIO 1411

Ambient Operating Range65°-105°F
Cooling Capacity1 Ton 13,800 Btu/h
Voltage/Amps ()115 1-Phase
Amps (A)11.5
Plug ConfigurationNEMA 5-15P
Dimensions (W x H x D)37.75 x 16.325 x 29

KBIO 1411

KWIKOOL BIOKOOL PORTABLE AIR CONDITIONER
99.97% at 0.3 micron HEPA filtration
UVC lamps can create inhospitable environments for microorganisms such as bacteria, viruses, molds and other pathogens
Two models available: 3-speed 600 CFM or 3-speed 1000 CFM

OptiClean 1500

Supply Airflow h/m/l500/1,000/1,500 cfm
HEPA filtration/Dual UVC lampsLong-life – 11" deep
Pre-FilterMERV-7 or higher
StandardASHRAE 170

99.97% efficient, long life HEPA filter for particles as small as 0.3 microns
Two models available: 3-speed 600 CFM or 3-speed 1500 CFM
Meets ASHRAE Standard 170
Standard MERV 7 or higher pre-filter
Optional duct transition for negative air application
Maintain indoor air quality in environments prone to wildfires

OPTICLEAn 600

99.97% efficient, long life HEPA filter for particles as small as 0.3 microns
Two models available: 3-speed 600 CFM or 3-speed 1500 CFM
Meets ASHRAE Standard 170
Standard MERV 7 or higher pre-filter
Optional duct transition for negative air application
Maintain indoor air quality in environments prone to wildfires

Supply Airflow h/m/l200/400/600 cfm
HEPA filtration/Dual UVC lampsLong-life – 11" deep
Pre-FilterMERV-7 or higher
StandardASHRAE 170

Designed for medical facilities, schools, and other high-traffic facilities, this combo air cleaner, and negative air machine is designed to eliminate viruses, bacteria, and more in some of the largest spaces.

Spot Coolers Healthy Buildings | Improve Indoor Air Quality Indoor air quality has never been more important. Through the Healthy Buildings initiative, Spot Coolers can provide the perfect combination of spot coolers...

KWIKOOL BIOAIR+
KBP1800

Designed for medical facilities, schools, and other high-traffic facilities, this combo air cleaner, and negative air machine is designed to eliminate viruses, bacteria, and more in some of the largest spaces.

Supply Airflow h/m/l1550/1675/1800 cfm
HEPA filtration/Dual UVC lamps4" deep/Triple UVC Lamps
Voltage/Amps ()115v/15a NEMA 5-15
ConstructionStainless Steel

KWIKOOL BIOAIR+
KBP1000

Designed for medical facilities, schools, and other high-traffic facilities, this combo air cleaner, and negative air machine is designed to eliminate viruses, bacteria, and more in some of the largest spaces.

Supply Airflow h/m/l750/875/1000 cfm
HEPA filtration/Dual UVC lamps4" deep/Dual UVC Lamps
Voltage/Amps ()115v/15a NEMA 5-15
ConstructionStainless Steel

KWIKOOL BIOAIR+
KBP600

Designed for medical facilities, schools, and other high-traffic facilities, this combo air cleaner, and negative air machine is designed to eliminate viruses, bacteria, and more in some of the largest spaces.

Multi-application - HEPA-filtered air purifier/ filtered negative air machine / both simultaneously
HEPA-filtering with 99.97% efficiency
3-speed 600, 1000, & 1800 CFM capacities
UVC lamps can create inhospitable environments for microorganisms such as bacteria, viruses, molds and other pathogens
100% Stainless Steel
ETL Certified

Supply Airflow h/m/l350/475/600 cfm
HEPA filtration/Dual UVC lamps4" deep/Dual UVC Lamps
Voltage/Amps ()115v/15a NEMA 5-15
ConstructionStainless Steel

Classic 60
AvailabilityFor Rent Only
Ambient Operating Range75°-115°F
Cooling Capacity60,000 Btu/h
Voltage/Amps ()460 3-Phase
Amps (A)8.8
Dimensions (W x H x D)42 x 32 x 49

The MovinCool Classic 60 is a reliable workhouse for controlling the most heat-intensive environments in manufacturing, warehousing, and outdoors. It operates on 460V with 20 amp circuit and uses 5.9 kW to produce 60,000 Btu/h of Spot On Spot Heating & Cooling Solutions

Digital controls for “set and forget” convenience.

Programmable for weekend and weekday operation with optional wall thermostat and remote control box (optional accessory).

Money-saving alternative to central air conditioning — no costly installation.

MovinCool’s most powerful self-contained air conditioner to keep productivity at optimum levels in the face of extraordinary heat.

Classic 40
Ambient Operating Range75°-115°F
Cooling Capacity39,000 Btu/h
Voltage/Amps ()220 3-Phase
Amps (A)14
Plug ConfigurationNEMA L15-30P
Dimensions (W x H x D)38 x 26 x 43

The MovinCool Classic 40 is a practical, flexible alternative to central systems for controlling heat-intensive environments in factories and warehouses. Operating on 230V and 25 amp circuit, it uses only 4.2 kW to generate 39,000 Btu/h of cooling.

Can be equipped for mobility with optional wagon (dolly) or casters kit.
Adaptable to available space — use as floor-standing or ceiling-mount.
Optional 5-gal. condensate tanks for applications without drain access.

Digital controls for “set and forget” convenience.
Programmable for weekend and weekday operation with wall thermostat and remote control box (optional accessory).
Affordable alternative to central air conditioning — avoids costly installation.

X SERIES
Designed to provide workstation cooling In tough environments such as manufacturing floors, distribution centers and shipping and receiving bays, the MovinCool Climate Pro X Series brings spot cooling to the hottest environments with an operating range of 70°-113°F. Powerful cool, dry air flow is delivered through directional nozzles at high velocity to provide relief right where you need It. Three models with a broad range of accessories are available for dedicated workstation or multi-station cooling.

Model P4000
Features:

UL approved
Built-in thermostat
Direct wiring of power supply to terminal block
Ductable
Forced-air blower
Overheat protection
Rugged steel housing


Benefits:

Cycles heater on/off automatically
No need for expensive recepticals
May be ducted up to 50 feet
Circulates room air for efficient use of heated air
Unit will safely shut down if blower is restricted
Durability

-Input
BTU/Kw - 136,000 / 40
109,200 / 32
54,600 / 16

-Electrical -480 Volts
50 Amps
3 - phase

-Fan -1,800 CFM
-Thermostat -Low/Med/High
-Temperature Rise 100 degrees
-Ductable - 50FT
-Weight 125 lbs

-Dimensions 46″ L
20″ W
25″ H

Model P1500
UL approved
Quiet and clean
No by-products of combustion, so it’s safe for many applications where air quality is of utmost concern
Variable settings will conserve energy
Does not add to relative humidity so it can used
to assist dry out applications
Features an internal thermostat (30º – 100º F)
10′ power cord with NEMA 5-15P plug
Powder coat finish.

- Input 5,100 BTU/Hr | 1.5Kw
- Electrical 120 Volts 15 amp circuit
- Watts 1,500
- Fan 116 CFM
- Thermostat Adjustable
- Weight 15 lbs.
- Dimensions 13″ L
7.5″ W
11″ H

SPH-3043
Heating Capacity30Kw/102,360 Btu/h
Voltage/Amps ()480/3
Amps (A)36.3

SPH-1523
Heating Capacity15Kw/51,180 Btu/h
Voltage/Amps ()208-240/3
Amps (A)36.3