Cowboy Custom Audio

Amp and subwoofer install on this Corvette today. If you’re looking to add some bass to your ride, this 8w1v3 will do the job. The Alpine amp packs a punch too, and comes in a really small package!

This has been a long, ongoing project, but this 1995 Custom Flat 20’ got a complete re-wire makeover! This was a huge task and chore but I finally got it done. I did get some before and after pictures of what it looked like! Hopefully you can see the improvement and like it!

In the front of the boat, are some Jerry’s LED’s lights, with an on/off switch on the console, and can be independently turned on by the bottom, top, or both rows!

Also at the front of the boat, is a Minn Kota Riptide 80 trolling motor, which is a 24 volt setup, but came to me wired at 12 volts. It was also on a 50 amp circuit breaker, but runs service factor at 58 amps, and the owner was wondering why the circuit breaker kept tripping!

In the front, we got the batteries wired up to 24 volts, on a Minn Koda MK 2200 trickle charger, with a marine mounted 110V power source.

In the back of the boat, are 2 marine batteries, mounted and brackets off, wired in parallel at 12 volts, on a Minn Koda MK 2100 trickle charger.

The batteries are turned on/off by a marine grade brass isolation switch, to cut continuity and isolate charging.

In the console, are a world of aftermarket goodies, starting at the fuse panel. The boat came to me without a fuse panel, with all the accessories ran off the main power wire, just tapped into at some point.

From the fuse panel, it goes to a aftermarket radio, which is Bluetooth compatible, powering 2 Kenwood Marine 6.5’ speakers.

The Thalassa rocker panel is switched to control 2 front facing light bars, a 50 inch rear facing light bar, as well as amber side markers, overhead console lights, and the amber light on the boat motor.

For the engine, the Yamaha 225 VMax 4 stroke got wired to a 704 Controller, with fuel, oil, and battery gauges, as well as a tachometer.

And to top it off, it got a full Lowrance Elite 7Ti underwater radar system, to find out where all those fish are swimming!

Cowboy Custom Audio for all of your aftermarket 12 volt needs! Certified Advanced Installer!

2016 Honda Accord Sport got some Rockford Fosgate and AudioControl goodies! Flush mount bass k**b on the front dash panel to look like it belongs in the vehicle. You already know who to call! 100% mobile I will come to you!

What a beautiful car! This 1965 Plymouth Barracuda got a full audio overhaul today. The customer had no sound at all, and of course we delivered!
First we started out by removing the factory radio, and installed a Redondo RetroSound RK6367, which fit perfectly in the dash, and allowed for today’s upgrade technology features, with a light up LED display, Bluetooth, USB, Aux, and SiriusXM!
We also installed a Boss CX550-RB that powered 2 Rockford 12” subs in a sealed enclosure.
Mids and Highs were installed in the upgraded aftermarket kick panels and we even got the 6x8 in the dash working that wasn’t working before.

This car sounds amazing, and looks so great. While working on it, two people stopped by and said it was such a beautiful car. This one definitely turns heads and has stopped traffic multiple times.

I’d like to sincerely thank Mr. TJ Belcher for trusting me and giving me the opportunity to work on something so stunning. Installing systems and making things look good is what I enjoy doing, and while each install is unique, this is one I will remember forever.

This 2017 Nissan Titan XD got a radio upgrade today, from stock to a Phoenix PX6 with Android Auto. This radio retained all the factory functions, steering wheel controls, AC controls, all in one nice, large, and factory looking display. Shoot me a message today to find out options for your vehicle!

Quick Double Din Install in this 2004 Dodge 2500. Previous install was done using electrical tape and incorrect hardware. Wish I would have gotten pictures of the before

I finally made a website, please let me know what you think about it!! Thank you! Will be updating it as I go and improving it for sure.

https://zacharydadams7.wixsite.com/cowboycustomaudio7

Home | Cowboy Custom Audio Welcome to Cowboy Custom Audio. Over the years, we’re proud to have garnered the trust and loyalty of countless customers. That’s because our installations are only executed using quality materials and the latest technologies to meet the highest industry standards.

Cowboy Custom Audio updated their website address.

Install of an Oracle LED wheel light kit

For Sale, is 2 JL 12W3v3-4 subs in a slot ported basswedge enclosure (tuned to about 33hz). Asking $500 for everything. These were installed and used for less than 4 months, never abused

Some custom fabrication work that me and my classmates worked on and learned in Stereo School!

Simple, clean radio install in a Corvette. This one also got a backup camera and a flush mount USB for Apple CarPlay

Hello friends and family! I am opening my audio business that I do on the side back up and I thought I would update my page with pictures of recent installs and projects that I’ve been up to! I’m sorry if your page gets spammed with photos upon photos! Thank you all for your support

The SMD DD-1+ putting in work tuning 3 Fusion Marine Amps today

A new radio installed in this 2004 Mercury Mountaineer and cleaned up all the unnecessary rats nest of wiring from a previous install

Cowboy Custom Audio Master Certified MECP 12 Volt Installer that specializes in aftermarket installation and accessories

Cowboy Custom Audio now has a new tool to properly set your amplifier gain to match your vehicles head unit output! The SMD DD-1+. No tuning your system by ear like some other audio shops, this is 100% the real deal!

It isn’t always about cars and clean wires 😁 home entertainment is on the resume as well. Home audio, surround sound, TV mounts. I can make it happen

Another add a fuse tap for a remote turn on wire, for a clean up job in a 2013 Dodge Ram. Not happy with your previous install? Just want new wire run? Give me a call and we can make it happen!

Y’all please go show my new business page some love!

Kicker HS-10 Hideaway sub. When you have limited space, a compact subwoofer is always nice, and an experienced installer is always needed

2015 F-150 with 2 Rockford Fosgate 10’s and a LC2i and Planet Audio amp

Es**rt Max 360C radar detector and M1 DashCam install on the rear view mirror, with a clean wire install! Hard wired into the fuse box with an add-a-fuse tap on the draw side for 12 volt protection. Clean, and as always, professional

I’ll always do my best to make your wiring as clean and functional as possible, no matter how much or how little space you may have!

2002 GMC Sonoma got a Pyle single Din radio install, with a fold out touch screen. These trucks don’t have a lot of space in the dashboard, so this radio was a perfect aftermarket upgrade for this truck!

Small Line-Out converter installation behind the radio of a Chevy Malibu. Built on a plug and play harness so you can disconnect and plug back in the factory wiring