Radford Racing

Spotted Ashley The Car Guy out at the Hub City Barbeque. Make sure to go get some elote from their tent.

They have a mariachi band shortly you don't want to miss.

Come out and say hi at the Cook's Garage . If you have kids let them come rev the Can-Am On-Road Ryker.

Let's say I was excited to tear down the Ryker and get the primary clutch spring installed from KWI Clutching.

This was short lived and after realizing I didn't get the governor cup puller tool I went on an adventure to make my own.

After removing the governor and spring I compared the two and I am 100% sure the Maverick x3 spring is not gonna work and I didn't even think about it.

Now time to put everything back together for Family PowerSports Lubbock bikes and coffee in the morning.

I wish I could find more performance for the Ryker and people willing to venture out for parts. If anyone has a recommendation of a spring that would work I am all ears.

Picked up some goodies from KWI Clutching for the Ryker. New pink primary spring, and Gboost Technology racing series belt.

Hopefully we can start lowering this 60ft time from 1.8 to something more manageable.

Thanks guys for the keychains, koozie, and stickers.

The Slaton Bakery Banana Pudding Festival was approved by Riley.

Make sure to follow her on Instagram at

What a beautiful morning for the Coffee & Cars Lubbock out at Cooks Garage.

Shout out to Dynojet Research Inc. , MandHtires.com MH Racemaster Design Engineering, Inc. For all the quality parts to make this thing go fast.

Swigs + Sweets out here at Gene Messer Ford Lubbock

Make sure to come out and hang out! Plenty of events today and a huge turn out.

Just like every 3rd Saturday of the month we will be with our partners at at 19th and the Loop from 8-10am.

Hope to see you there!

I have been struggling to keep the exhaust temps off my leg and from the heat shield rattling. I went ahead and wrapped the downpipe in Design Engineering, Inc. heat wrap and have to say for my first time it's not too bad.

Racing a Penwell Knights Raceway a few weeks ago. Huge shout out to Noah Robert Sanders at Trueoptimalphotography for the awesome photos!

This isn't something you see everyday and glad to be able to share with all of you.

Testing went well at Lubbock Dragway now it's time to head down to Penwell Knights Raceway for an exciting evening of racing!

I am still looking for someone to do some fine tuning on the Dynojet Research Inc. Power vision.

If you are out tonight come say hi. Hopefully we can get the Ryker a bit faster tonight.

This Friday night is bike night presented by BoozeFightersMC and is open to everyone $10 per person to get in gate and kids 12 and under are free. It is free to race Friday with admission. You can race any vehicle as long as it is not dripping fluids including a/c condensation, dirt, or any other debris. Trucks need to have bed free of any loose items. Helmets are recommended, required if running 7.50 or faster. Motorcycles helmets are required, no open toe shoes allowed, no shorts allowed. Faster than 7.0 proper leathers required.

Anyone headed out to Lubbock Dragway this evening that knows a thing or two about tuning and willing to work on a Dynojet Research Inc. .

I have searched high and low for someone to work on dialing in the Ryker but to no availability.

Amazing where the Can-Am On-Road Ryker 900 has come in just 1 year. Now we are in the 7.3s and last year this time was 9.6s.

I would be able to do it without the support of Dynojet Research Inc. and Treal Performance . I am still searching for someone to build a front mount intercooler setup, and some fine tuning.

If you know anyone that would be willing let me know. The goal for 2023 is to get into the 6s before the end of the season.

Definitely wasn't expecting this! Thank you everyone for the continued support! Huge shout out to Dynojet Research Inc. , Treal Performance for all the goodies to make this beauty run.

Beautiful morning here at Gene Messer Ford Lubbock for the Coffee and Cars Mid month with Gene Messer Ford .

Shout out to Swigs and Sweets for the coffee and snacks!

I am in search of someone that can assist with tuning the 2022 Can-Am On-Road Ryker 900 ACE. It has a turbo kit installed, upgraded clutch weights, Dynojet Research Inc. PowerVision 3, DynoJet Wideband CX and currently working on the DynoJet Launch Control Module.

However the launch control module is designed for Maverick X3 it uses same engine, sensors etc. The bike I think is fighting back and forth with the PV3 and the LCM. Starts and runs fine for 5 seconds then turns off.

Currently DynoJet only supports 2019-2020 as the coils changed in 2021+ which I swapped the connectors.

Anyone that wants to take a look let me know I have been unsuccessful at getting anyone to do any dynojet stuff on the bike. All the contacts on DynoJets website are Harleys etc and don't know anything about can-ams.

Thanks in advance!

Snapped some 📸 this morning at Coffee and Cars Mid month with Gene Messer Ford .

The guys from 806 DC Offroad going topless today!

Radford Racing updated their business hours.

Some beautiful views on the way to Colorado.

Tomorrow I will be going through all the photos and videos from Funny Car Chaos at Penwell Knights Raceway . Please tag the owners and if you don't see your car shoot me a message I pretty much for every car.

These photos are free of charge as well just have the owner shoot me a message and I will send them to you.

Things are heating up at Penwell Knights Raceway ! Exciting day of racing!

Tonight was a rough one first rounds went good then the bike started slowing down. I even caught a .001 light at one point and still was a 7.7x run.

I think the stock belt is slipping so time to check it out. The bike definitely shocked a bunch of people at Lubbock Dragway . Thank you guys for putting these events on.

Winner of 1st round of No Box and Sportsman!

Shout out to Ryker-ops / Bajaron for the free grips with my sway bar. I was having some shaking in the front end at the track. Hopefully this tightens it up. More to come and a review video!

I have been working on this winch box setup for last 3-4 months and finally finished it today. Check it out and let me know what you think.

Winch Box for the car trailer is almost finished. Haven't been able to work on the is300 since the engine is sitting on floor waiting for someone to buy it. Hopefully beginning of the year things start looking better for some real progress.

Made some good progress on the IS 300.

✅ L*D Differential installed.
✅ Fluids drained.
✅ ECU removed and washer fluid bottle.
✅ Front end dissembling almost complete.

Motor should be out by end of the week. Heads and block for the LS are at Total Engine Service.

Made some progress on the car today.

✅ Non-L*D Differential Removed
✅ Cylinder heads are bare now
✅ Block, heads and crank all loaded up for machine shop tomorrow.

🚚 Front Sump Oil Pan and motor mount kit came in today!