Rippin PowerSports & Marine, Nashua, NH Videos

1121 sugar sands mercury v6 very 😔 eve. Though it's crank survived unfortunately the block has not due to rod damage

1121 sugar sands mercury v6 2 stroke blown motor. Broken rod I've got pin bearings in exhaust hopefully it's piston wrist pun and not crank

1121 sugar sands 210 merc v6 found the when exhaust was moved. Not good 😐

1121 sugar sands mercury v6 2 stroke blown motor. diagnose & disassembly part 2
1121 sugar sands mercury v6 2 stroke blown motor. diagnose & disassembly part 2

1121 sugar sands mercury v6 2 stroke blown motor. removal
1121 sugar sands mercury v6 2 stroke blown motor. removal part 1

Mercury v6 efi built and installed and winterized end of last season This is it's first start attempt and un Winterized now charged battery and reinstalled. Let's go

800 rfi conversion pre testing motor for compression , stator and crank trigger prior to installing. This is why during testing the starter failed Easy fix on bench not so installed. In the comments will be the stator and trigger picture of output all tested good and are working

1120 Yamaha fx-ho diagnose oil in water problem part4 compression and leak-down test
1120 Yamaha fx-ho diagnose oil in water problem. part 4 head gasket or oil cooler issue. 217 hours lets see what we find. and where this leads .

1120 Yamaha fx-ho diagnose oil in water problem part 3
1120 Yamaha fx-ho diagnose oil in water problem. part 3 head gasket or oil cooler issue. 217 hours lets see what we find. and where this leads .

My little man waiting to work with me.

1106 seadoo 717 pre install testing and pre oiling prior to installation and 1st start 161m / 160p compression

1118 seadoo sportster mpem conversion with this jewel going in.

For all fellow mechanics guys and ladies How many times have you heard this.

1106 seadoo sportster mpem conversion test 2 temp over heat circuit

1106 seadoo sportster mpem conversion test 1 mpem power up, dess post, shifter neutral switch itergration and starter operation

1118 sesdoo Utopia Chx8300 Shifter installed

Sadly king won't be here to great you anymore his time has came and passed.

Well I wanted to have 4 motors assembled in 4 to 5 days. Said the old me before injury and sick crap would have. Couldn't make that happen but i did do 6 in 10 days

4 motors 10 hours per figure. Stx1200, Can-am spider , rfi 800 conversion , & Seadoo 951 3 have been long time over due from just before my medical crap. This will tell me if I'm back to full or not once and for all.

Sad times end of season