McEntire Welding & Repair LLC

Added 3 square tubing to a trailer gate for support so the customer can drive heavier equipment.

Replace a receiver hitch with a new one

Fixed my cousins box blade while I was visiting family

Finished up this project for a customer. Wanted me to weld up a hitch for his mobile home so someone can come pick it up. Someone cut the hitch off with a torch years ago. Uphill welding with 2 different types of rods. Might not be shining but it was. Made 2 Uphill passes .

Repaired a ramp for a horse trailer that fell off during a trail ride event. Didn't have time to get before pictures or really after pictures. Customer needed to get back to rodeo events. Here some pictures of me working on it. The ramp was holding up with a tractor so I can tack it up on the sides and down the middle. Welded corners and every 4 inches with a 1 inch weld. Alot of welds but when the ramp weight is heavy and there horses weigh 1200 pounds. Its better to have to many welds than hardly any welds lol

Repaired a gate that hides the trash dumpster at a business store.

Fixed a camper jack stand today.

Did a hard welding project for my girlfriend's business. customer wanted a socket/wrench on her stainless steel cup as a handle. Had to pull out the special tig rod.

Visited family in Oklahoma and did some welding and cutting for my family.

Fixed the Pipe fence that was leaning toward the road from rain, earthquakes and from over the yrs

cutting/working the safe hinges on old bank safe that my great-grandfather borrowed money from to purchase land.

Was a subcontractor on this pipe fence. Due to the welding done before hand from a pipe liner. Took 2 days to fix his problems and finished the fence

Replace this divider for fertilizer to fall onto the spindles instead onto the ground. Couldn't use my tig because of tight place. Had to use my stick with aluminum rod.

Yesterday I finished up a aluminum livestock trailer gate that was welded poorly from a mig
Didn't even use aluminum wire. It had cracks, peeling, held on by 6 zip ties and wasn't leveled. Last picture I did with tig the pictures of the welded ones is from someone else who used a mig

Visited family in Oklahoma and did some welding for them.
Welded up a new fence around small garden made a potato or vegetable stand, made a stand for the metal chicken, hang gate and fixed a gate.

Finished repairing a trailer that a customer needed done. Added 2 Tow chains, 2 side replaced, some crack welds, added trailer sleeves.

Finished up a tig job today for a guy.
Aluminum livestock trailer gate was bent, torn apart and found some areas that the welds were cracked from someone else welding it. Remember pretty welds crack too.

Some of the fence I repaired for a customer. Rusty and over 30 years old fence.

3g test on mig and flux core had to pass to get a certificate from college.

My 4g test I had to take for stick welding in college to get a certificate.

Welded a new hitch and safety chain for my dad.

McEntire Welding & Repair L.L.C can now accept credit cards. Just extra charge of 2.6% per transaction.

Building a skid while I was visiting my family in Oklahoma.

I just started a Mobile Welding service can do stick, tig and brazing welding. You can bring me the metal that needs to be welded or I can come to your place to weld. I'm not full-time so I wouldn't be able to on some days. I'm a full-time firefighter that works in Montgomery county, tx

Welding a flywheel for a customer