Wrecked Performance

Looking like a truck again! After cleaning a lot of rust prepping for paint, finishing up some welds she's mucho sexy. Ford 8.8 L*D rear end, watts link, air bags. 🤤🖤

Getting down and dirty on the Hilux build. That beams is looking sexy in there. Going to paint up the rear end then push her out for some more customer cars 😜

Project 2jz compound turbo is300 build. Still need to get 2x wastegates, the second turbo and more materials

Work on the 1960 Falcon build. Mustang II front end swap. Ford 8.8 4 link incoming

Got this thing about 90% done in the back! About 70' of DOM on this thing already.

Hit up wrecked performance for some tube work!

Got some work done on the front axle for the haunster truck this week. Thank you for awesome parts

Rouch country 3.5" lift in this customers tundra! Had to perform a bmc to get these 35's to fit

Crack turns into a slit. The slit of course gets filled by some rod. Sp***ge everywhere!! That of course gets cleaned up then I send her back to her owner 🤔😜
Talking about the rims btw

__________________________________________________

Miranda getting down and dirty helping the struggle

My guy Devin rolled through with his vw Jetta TDI. The turbo was falling out of the car. 2/3 turbo studs were broken in half. So we replaced the studs put it back together with a few more upgrades!! Like a hood exit exhaust and some custom intercooler pipes

Hit up Wrecked Performance for your custom needs!
__________________________________________________







.8
***es

Wrecked Performance Tig equipment
Hit us up for some performance/suspension upgrades and mods

__________________________________________________







.8
***es

Wrecked Performance IS300 rear subframe brace
__________________________________________________

Do you have issues with rear subframe flex?
The IS300 subframe can crack under high sideways forces and higher horsepower builds
__________________________________________________

The rear bracing both upper and lower can take care of all your problems
__________________________________________________

DM me for more details
$600 for both upper and lower bracing
$200 for just the lower brace






***es

Finished up this rusty bitch today. Plated every single bracket with 1/4" steel. Installing new shocks and new leaf springs.

__________________________________________________

If you need some fabrication DM me
Wrecked performance




***es

Did a little work on this Toyota pickup. The support brace was rusted out. Removed the brace and installed a piece of 1/8in thick DOM tube and some kickass welds
Get wrecked






.8
***es

Custom gas tank mods for a motorcycle 🤘. Getting work done

Cab and bed are back on the frame after way too long. This is a test fit moment to check clearances for the air bags and transmission. At full drop the bed sits off the frame on the wheels. Going to be trimming the wheel wells and installing flares. Time this make a tr**ny's crossmember

If you're looking for a custom engine swap or some tube bending or maybe you want to slam your ride on custom air suspension?

At Wrecked Performance we can handle the job.

If you have a special project or even a cool idea and need help from someone with an engineering mind. Message me directly for a personal quote and join the Wrecked community

Website: www.getwreckedperformance.com

Located in Shelton, Wa


welds

Some cool welding shots while making motor mount brackets for a 2uz-fe v8 swap from a Toyota sequoia to a 3rd gen 4runner. Replacing the 3.4 5vz-fe.


Need a custom engine swap or specialty wiring job? Maybe just some general maintenance? We cover everything at Wrecked Performance 🍻.
Dm me













***es

Pumpkin patch field trip fun with my kiddo

Had the boys over this weekend helping a mfer out with the beams swapped '78 Toyota hilux build. Got the engine mocked up for finishing motor mounts. Got the axle bag mounts tacked on and next is the uppers after I get this truck as low as I can without c notching the frame and bed.

Contact Wrecked performance for custom builds







.8
***es

Plated the front inner frame for motor mounts. Added welds to the body mounts for extra support. This 78 frame is definitely thinner in some spots.







.8
***es

Some love haha. My first ECU I hand built and installed on my supra.




***es

Swapped the output shaft of the 4runner auto into the aristo auto. Kept 4wd on a stock Aristo twin turbo tr**ny with a modified speed sensor gear

Installing Oracle halos





***es

When I aristo swapped my 1998 3rd gen 4runner.





***es