Kyle's Small Engine Repair and Maintenance

This is the cylinder and piston from a Stihl MS200T. This one came in not running, and locked up. It would not turn over past TDC, and this piece of foreign material would be the reason why.

This saw will be getting a full rebuild - more pics to come!

🍂Leaf blower season is upon us!🍁

This BR800 came in with a customer complaint of no power. A simple tune-up (including a valve adjustment) got this one back up on its feet.

Reach out to us if your leaf blower, or any other piece of equipment is not running properly!

A customer gave us this 372xp X-torq to repair. It was running rough and losing power. Upon inspection, it was found to have a scored top end. Pressure testing showed the culprit was the decompression valve leaking.

We installed a new Meteor cylinder and piston kit with Caber rings, and plugged off the decompression. This saw came up perfect under pressure and vacuum tests after reassembly. A few finishing touches, test and tune, and its back out in the field!

All that, yet still cheaper than buying a new saw!

Another backpack blower that bit the dust! This one happens to be an Echo PB8010 that was mistakenly ran on regular gas. A new OEM piston and cylinder was installed on this unit, along with new gaskets, bringing it back to life.

This PB8010 is upwards of $700 to replace, so the owner was very happy to have it repaired at a fraction of the cost of a new one!

This Redmax EBZ8500 blower was the victim of an air leak, which scored the piston and cylinder. Pressure testing the unit revealed the screws at the intake manifold had come loose.

A new OEM cylinder and piston was installed, repairing the machine at a third of the price of a new one!

We have some used equipment available that has been serviced, checked over, and ready to go!

If you are in need of a lawn mower or string trimmer before your lawn gets ahead of you, get in touch with us!

Greener grass and warmer days are ahead - is your lawn equipment ready to go? Call, text, or send over a message to schedule your tune-up!

Now is the time to save and get your blades, filters, spark plugs, lubricants, etc!

Had some old iron on the bench - Husqvarna 288xp in for some repairs!

We are now offering powersports parts from All Balls Racing for your ATV and UTV/side by side!

Contact us for parts for your machine; from bearings and bushings, to carburetor kits and air filters.

If your equipment is not running at full power, a dirty spark arrestor like this one may be the culprit.

This dirty spark arrestor was pulled from a Stihl chainsaw.

Before and after pics of a dirty Mikuni carburetor off of an ATV, cleaned and rebuilt.

BR600 in for a stalling issue, and serviced!🔧

This one came back to life with a service kit and new carburetor!

This old Cub Cadet came in with a no spark issue. It is now running great again, and back with its owner!

Have you checked the blades on your mower lately?

This John Deere L130 was well over-due for a new set of blades.

We've had a lot of repairs and annual tune-ups come in this year. Here is a Stihl MS362 that was just finished up. This one came in locked up, not running. Luckily, the bottom end was still in good shape. A new piston and cylinder kit fixed this one right up! Need repairs or a tune up done? You know who to call!

This John Deere D140 came in for a tune up for the season. All filters and oil changed, new spark plugs, new blades, and a good check-over and its ready to go!

Here is another example of what happens when old gas sits in your equipment. This Champion generator was the victim of a dirty carburetor.

The perfect tool to keep with you and your saw out in the woods! We have them!

Includes:
-10mm, 13mm, 16mm, 17mm, 19mm hex wrenches
-13mm and 17mm socket wrenches
-4mm Allen
-Bar groove cleaner
-Large screwdriver for bar adjustments
-Round file gauge
-Small screwdriver for carburetor and oil adjustments
-T27 torx

In the market for a snow blower? On consignment is this, like new, 6.5HP/24" clearing path snow blower. This is self propelled, and equipped with electric start. It has only been used once! Asking price is $425.

Get it now before the next big storm!❄🌨

This Stihl MS192T took a fall and cracked the fuel tank. The customer tried to repair it, but it continued to leak.

The whole saw was stripped down, cleaned, and inspected for any other damages that may have occured from the fall. It received a new engine housing, throttle trigger, chain brake handle, and clutch drum and is now ready to go back to work!

This Craftsman snow blower came in with a broken auger drive belt.

Did the recent snowstorm leave you with a broken snow blower? Don't hesitate getting it fixed before the next snow falls and risk being stuck using a snow shovel! Call, text, or message us for your parts or repair needs!

The cold weather is upon us, which means snow will eventually be falling! ❄🌨

Is your snow removal equipment ready to tackle the job? Call, text, or message us to get yours serviced - or to get the parts you need to get up and running.

Took a little step back in time when this 1979 Honda XR80 dirtbike came in to get checked over and running again after sitting for some time.

Completed a leaf pickup with a nice view of Lake Wallenpaupack today!