Nema Supply

The Hammond MFG steel flush-mount enclosure is designed for indoor use to enclose controls, instruments, and components which do not require oil-tight or dust-tight protection.

It is ideal for applications where components may be easily mounted and wired prior to installation of wrapper and door.

Order yours today at nemasupply.com

The Altelix NEMA 4X Security Camera Cabinet provides a way to quickly and easily deploy three HIKVISION® network cameras.

Rather than mounting each camera separately, the included HIKVISION® camera mounting brackets are installed onto the Altelix Security Camera Cabinet so only the cabinet itself needs to be mounted.

Order yours today at nemasupply.com

The Altelix NMKG-283-08 Pole Mount Kit easily attaches to the rear of our NP171406 series NEMA enclosures. This pole mount kit allows the enclosures to be mounted to poles up to 9.5 inches in diameter. The mounting brackets are constructed from 0.04" (1mm) thick galvanized steel for all weather applications.

Order yours today at nemasupply.com

This enclosure has scored a NEMA Rating Type 4x! What does that mean?

☀️ It is constructed for either indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts.

💨 Protection of the equipment inside the enclosure against ingress of solid foreign objects (windblown dust).

🌧️ Protection with respect to harmful effects on the equipment due to the ingress of water (rain, sleet, snow, splashing water, and hose directed water).

❄️ Protection against corrosion; and undamaged by the external formation of ice on the enclosure.

Message us if you have any questions!

The Integra Pole Mounting Kit is available in 29 different size combinations, and you will have access to the handy Pole Mounting Kit Guide!

Order yours while supplies last at nemasupply.com

AttaBox Industrial Enclosures Triton series enclosure, is NEMA 1/3/3R/4X/12, 24 x 20 x 8in (HxWxD), wall mount, fiberglass reinforced polyester, gray, single-door, (4) twist-lock latches, padlock hasp and staple.

Visit our website to place your order today:
www.nemasupply.com

The Hammond Manufacturing Co. 1418 N4 SS Series is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.

Visit our website for more information:
www.nemasupply.com

The Altelix LLC NFC121006-T01-1 Outdoor Weatherproof Phone Call Box with Emergency Phone Label is ideal for deploying emergency telephones in outdoor locations and harsh environments.

This rugged IP65 rated box is molded from durable and UV resistant fiberglass reinforced polyester (FRP). The door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and a quarter-turn latch to secure the enclosure. A drip rail over the door provides additional protection against water dripping into the cabinet while the enclosure is wet.

This model features a standard wall mount RJ11 jack. A cable grommet is provided on the side of the box for the telephone wire. For installations that require better protection from water, a waterproof cable gland is included in the accessory kit.

Visit our website for more information:
www.nemasupply.com

The Baco IP69K rated 22mm control station emergency stop push-to-pull reset is multi-purpose and pre-equipped with:

Pushbuttons
Emergency Stops
Selector Switches
Key Switches
Up to 3 Blocks Per Position

Visit our website for more information:
www.nemasupply.com

The Allied Moulded Products Empire AMEC Series offers standard features as well as full-panel access and all usable panel space. In addition, the standard gray cover is available with optional custom modifications and accessories. These options include back panels, vent kits, print pockets and ULTRAPLUG® hole plugs.

AMEC enclosures insulate and protect controls and components against the toughest elements in the harshest environments. It is available in the popular 36” x 30” size (with 12” depth) with 316 stainless steel hinges and latching hardware. Enclosure configurations include twist latches, 3-point latching handle, opaque cover and cover with polycarbonate viewing window.

Visit our website for more information:
www.nemasupply.com

Ventilation is vital! 💨

This DNFF series filter fan kit from Hammond Manufacturing Co. includes a fan, plastic filter grill, filter, metal grill, wire cord or leads and the mounting hardware.

Visit our website for more information:
www.nemasupply.com

Heartland™ Series is a high performance, shallow depth, polycarbonate enclosure applicable for heavy industrial conditions, but with a refined style suitable for commercial, industrial and OEM design applications.

Heartland Series enclosures are rain-tight and watertight rated for use in both interior and exterior applications. This configuration features an opaque cover which is hinged, latched, and padlockable.

Visit our website for more information:
www.nemasupply.com

Attabox SolarShield HMI Covers are designed for use with all enclosure material types. They are ideal for protecting Human Machine Interface screens in harsh environmental conditions and UV. t has an easy to use, hinged design includes supporting inner doors for hands-free use and better visibility of the HMI screen in the sun.

SolarShield™ HMI covers protect HMI screens and electrical equipment from corrosion and damage due to UV, water, oils, dirt, and sand and greatly reduce equipment replacement cost. Impact resistant polycarbonate construction provides long dependable life in harsh conditions.

Visit our website for more information:
www.nemasupply.com

This Hammond Manufacturing Co. Ltd. HJ series is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
It also provides a degree of protection from falling dirt, dust, oil and water.

Visit our website for more information:
www.nemasupply.com

Missing a back panel? Not for long!

These standard aluminum back panels are used for Heartland, Commander, Freedom, and Centurion series.

Visit our website to place your order today:
www.nemasupply.com

Allied Moulded’s HMI cover kits are designed to provide protection for instruments or electronics requiring routine attention or detail and makes accessibility to electronic components easy!

Visit our website for more information:
www.nemasupply.com

The Fandis FF20U is a gray filter assembly with dimensions of 325mm x 325mm. It is intended to efficiently filter the air coming into control cabinets, automation equipment & electronics.

The FF series was made to be an updated improvement to the older FPF series, which includes design enhancements and a faster installation. Storage temperature: -40 C to 70 C (-40 F to 158 F). UL Approved. Fan not included.

Visit our website for more information:
www.nemasupply.com

The LSIS Molded Case Circuit Breaker comes with the following specs:

⚙️ 3 Pole
⚙️ 80%
⚙️ 65kA
⚙️ Fixed thermal/magnetic
⚙️ Lugs Line/Load Side

Learn more about it on nemasupply.com

The Altelix NS242424VA1C Vented Steel Weatherproof NEMA Enclosure with 120VAC Power and Equipment Plate is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.

This rugged enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door enclosure.

Learn more about it on nemasupply.com

The Hammond Manufacturing Co. Ltd. H1 series is designed as your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing's practical open-design and manufacturing principles with legendary service, support, and reliability.

H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today's IT manager.

Learn more about it on nemasupply.com

The Altelix NP171406V-PKIT01 includes a heavy duty steel pole mount bracket and two stainless steel bands. It features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries.

This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for a padlock. Knock-out holes are provided on the top and bottom. Meets or exceeds NEMA Type 3, 3X and IEC IP55.

Learn more about it on nemasupply.com

The Altelix NF141208VFA1C-85 Fan Cooled Vented NEMA Enclosure is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The aluminum equipment mounting plate features four pre-wired 120VAC power outlets for your equipment.

Get your project up and running quickly and transition to hard-wired later if needed. The power cord can be easily removed, and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.

Learn more about it on nemasupply.com

The Allied Moulded Freestanding Double Door Fiberglass Enclosures are non-corrosive, non-conductive, lightweight, with a lower installation cost, easy to modify, and a longer life cycle compared to steel.

They also feature a rigid design with back panel inserts plus a spring-loaded gasket system.

Learn more about it on nemasupply.com

The Altelix NP171406MP Polycarbonate + ABS NEMA Enclosure with Full Size Non-Metallic Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.

The enclosure can be wall-mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.

Learn more about it on nemasupply.com

The Altelix TBP12-2 Weatherproof Emergency Phone Enclosure is ideal for deploying telephones in outdoor locations and harsh environments such as in schools, on pool decks, golf courses, loading docks, public buildings and commercial properties.

This durable NEMA 4X enclosure is molded out of UV-resistant PC+ABS, a high-tech blend of polycarbonate and ABS, which combines the best qualities of both into a single material. PC+ABS enclosures maintain high toughness, durability, and dimensional stability even at extreme cold and hot temperatures.

Learn more about it on nemasupply.com

The Altelix TL2X5-DIN is a 5-Conductor DIN Rail Mountable Splicing connector. It features two independent wiring blocks that can each splice up to 5 wiring together. It is designed to be attached to standard 35mm Top Hat DIN Rails.

Learn more about it on nemasupply.com

The Altelix NX161608VFA1C-DIN Stainless Steel Fan-Cooled Weatherproof Industrial DIN Rail NEMA Enclosure with 120VAC Power and Equipment Plate is ideal for protecting DIN rail-mounted equipment from harsh environments and tampering.

The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and a quarter-turn latch to secure the enclosure. Internal grounding studs are provided in both door enclosures. Both the enclosure and door feature a brushed natural finish.

Learn more about it on nemasupply.com

The Altelix NS242424VFA1C-20A-85-R6U 19" Rack 6U Steel Fan Cooled Weatherproof NEMA Enclosure with 120VAC 20A Power and Equipment Plate is ideal for protecting rack mountable UPS power systems as well as other 20A electronic equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside!

Learn more about it on nemasupply.com

The Hammond 1487SS Series Nema 4x Pull Through Wireway is designed to enclose and protect electrical wiring from dirt, dust, oil, and water.

It's ideal for connecting machines to control panels or power sources.

Learn more about it on nemasupply.com

This Attabox wall mount enclosure is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.

Order yours today: nemasupply.com

Protection