NorCoSaw llc. PC Diamond and Carbide Cutting Tools

Access To 50 FREE Woodworking Ideas!
✌bit.ly/free-wood-ideas

https://wtf.systeme.io/knifehonepdf
4+ decades of tool sharpening.. Sharpen your Hunting-Pocket-Camping and Buck Knives properly. Enjoy🙂
My WayToFunnel marketing Knife Hone pdf give away.

buck knife sharpener We'll show you how to hone your buck knife to it's super sharpening potential... Be the best buck knife sharpener!

https://www.norcosaw.com/dado-set
A carbide tipped dado set is a type of circular saw blade that is specifically designed for making cuts in wood known as dadoes or grooves. Dadoes are narrow, rectangular cuts that are typically used for joining two pieces of wood together, such as in the construction of a bookcase or cabinet.

Carbide tipped dado sets are made of a series of saw blades with carbide teeth that are brazed onto the blade body. The carbide teeth are much harder and more durable than regular steel teeth, so they can stay sharp longer and make cleaner cuts.

To use a carbide tipped dado set, you will need a circular saw or table saw that is capable of accepting the blade. The blade is mounted on the saw's arbor, and the depth of the cut is adjusted by moving the saw's blade up or down.

When making a dado cut, it's important to ensure that the blade is properly aligned with the wood and that the saw is set to the correct depth. You should also use proper safety equipment, such as goggles and earplugs, when operating a circular saw or table saw.🙂

8" or 10" Industrial Carbide Tipped Stackable Dado Blade Set by: NORCOSAW®llc. 8" or 10" STACKABLE DADO SETS Standard dado set consist of right and left hand saws, four flat top ground chippers and shims that allow fine adjustment. This complete cutter sets are supplied in a plywood box. Clean cutting for cross-cut or ripping. ** 8″ - (203mm) Diameter 1/8″ to 13/16″ Kerf...

https://www.norcosaw.com/blades-bits-cutters
A carbide tipped router bit is a type of tool that is used to shape and cut wood, plastic, and other materials using a router. A router is a power tool that rotates a cutting bit at high speeds to remove material from the surface of a workpiece.

Carbide tipped router bits are made of a hard, durable material called carbide that is brazed onto the body of the bit. The carbide teeth are much harder than regular steel teeth and can stay sharp for longer periods of time, making them well-suited for cutting hard or abrasive materials.

There are many different types of carbide tipped router bits available, each designed for a specific purpose. Some common types of router bits include straight bits, chamfer bits, dovetail bits, and roundover bits.

To use a carbide tipped router bit, you will need a router that is capable of accepting the bit. The router bit is mounted in the router's collet, and the depth of the cut is adjusted by raising or lowering the router's base. It is important to follow proper safety guidelines when using a router, including wearing eye protection and using the tool in a well-ventilated area.🙂

Saw Blade and Whiteside Router Bits Standard or Custom! Saw Blade, Router Bits and Cutters" and a professional sharpening service center to back it up.. We've supported wood artisans for over 3 decades now with quality, price and service. Give us the chance to improve the life of your cutting tools.. Contact us Today!

Don’t forget tomorrow starts the new Facebook (META) rule where they can use your photos. Don't forget the Deadline is today!!!
I do not give Facebook (META) or any entities associated with Facebook permission to use my pictures, information, messages or posts, both past and future. With this statement, I give notice to Facebook (META) it is strictly forbidden to disclose, copy, distribute, or take any other action against me based on this profile and/or its contents. The information: The violation of privacy can be punished by law NOTE: Facebook (META) is now a public entity. All members must post a note like this.
If you prefer, you can copy and paste this version. If you do not publish a statement at least once it will be tacitly allowing the use of your photos, as well as the information contained in the profile status updates.
DO NOT SHARE. Copy and paste.
I DO NOT GIVE FACEBOOK (META) PERMISSION TO SHARE ANYTHING OF MINE., THAT I HAVE PUT ON THEIR SITE; PICTURES, CURRENT OR PAST POSTS, PHONE NUMBERS OR EMAILS. ABSOLUTELY NOTHING CAN BE USED IN ANY FORM WITHOUT MY WRITTEN PERMISSION OR VERBAL CONSENT.
Their new algorithm chooses the same few people - about 25 - who will read your posts.
Therefore:
Hold your finger down anywhere in this post and "copy" will pop up. Click "copy". Then go to your page, start a new post and put your finger anywhere in the blank field. "Paste" will pop up and click paste this will bypass the system.

Don’t forget tomorrow starts the new Facebook (aka...new name, META) rule where they can use your photos. Don't forget the Deadline is today!!! I do not give Facebook or any entities associated with Facebook permission to use my pictures, information, messages or posts, both past and future. With this statement, I give notice to Facebook it is strictly forbidden to disclose, copy, distribute, or take any other action against me based on this profile and/or its contents. The information: The violation of privacy can be punished by law NOTE: Facebook is now a public entity. All members must post a note like this.
If you prefer, you can copy and paste this version. If you do not publish a statement at least once it will be tacitly allowing the use of your photos, as well as the information contained in the profile status updates.
DO NOT SHARE. Copy and paste.
Their new algorithm chooses the same few people - about 25 - who will read your posts.
Therefore:
Hold your finger down anywhere in this post and "copy" will pop up. Click "copy". Then go to your page, start a new post and put your finger anywhere in the blank field. "Paste" will pop up and click paste
This will bypass the system.

Industrial Blades, Bits, and Cutters Sharpening & Retail since 1978
"we've seen a thing or two"
visit: Norcosaw..com