Tall_Pines_Racing

Happy to Announce we are now bottling our heavy duty transmission and rear end fluids in 1/2 and 1 gallon easy pour jugs. Shipping cost have also been significantly reduced thanks to other Ground shipping services available. We will continue to set the bar even higher this year, testing new ideas and products, putting them through the rigors of our modern high-performance machines. Our Fluids and greases protect a wide array of production and performance vehicles. Please reach out if you have any questions.

I am happy to announce we made our low-speed pivot/slide grease even better by adding solid Molybdenum for the most protection in the harshest street and offroad environments. If you are looking for a high-speed wheel/cv/uv grease, please refer to our CVW-2, which contains liquid Molybdenum, Teflon, and Phosphorus. All of which can be found on the home page of our website. Link in Bio.

Been a busy past few days with orders and out of state clients coming in for same day turn around. Some very nice builds that I'm honored to be a part of. Thanks for your continued support. To everyone, yes we are still treating gears and other components. Also I'm replying back to everyone's emails and various messages. Thanks for your patience.

Thanks for everyone's patience on emails, dm, calls, etc platforms these past few days. I really apologize for any delays. Also, a lot of orders will be shipping out today. Please check your emails for tracking info. I've been burning the midnight oil, getting everyone's parts treated, and their builds done on time for race events. I appreciate you guys n gals respect for the process. Yes I am still taking in more engine, transmission, and other parts for various treatments and finishing. Our processes and lubricants have been proven to significantly increase or ultimately guarantee the lifespan of a part. Whether it's a gear, shaft, piston, valve, spring, rod, bearing, bushing, sleeve, hub, etc we can help you.

In route to Screven Motor Speedway for the Winter Freeze $20K to win race. Stocked with a limited supply of Gears, Final Drives, Shaft Braces, Seals, and Heavy Duty Lubricants. Wishing all my boys good luck on the opening race of the Modern Day Outlaw Series. 👍
Really looking forward to what else we can achieve for you all in 2024.

All the fittings needed to upgrade the EP3's fuel system. You can get all of this on our website www.tallpinesracing.com
We are a trusted source for all your go fast needs, not just Transmissions. Proud Vibrant, Russell, DW, Radium, and more vendor.
Building rapport with a small grass roots company, as opposed to only buying from the big box stores, might save you some serious coin one day on that big purchase: just sayin.
Thank you to all those who continue to support our brand, we realize you could go anywhere else. ❤️

Another K Series Road Race Box almost ready for action!

Happy to assist in getting the transmission fluid changed in this EK9 Civic Type R. Torco Type F friction modifier was added since the car has a plate style l*d. Right in time for those beautiful fall mountain drives. Be safe out there my friend!

A super busy week comes to a close. Everyone still on the chopping block, I havent forgotten you. Whether that be your build, quote, or simple inquiry I will get back to you. Please remember I am a 1 man operation. I am fortunate to have some after hours help now. So we are capable of more than what I could do alone in the past.

Another sweet K Series build drawing to a close. This one will be paired with a 4piston longblock. Thanks for letting us be a part of your project.

Pretty clean.

Time and time again we have saved our clients hundreds to thousands of dollars on bolts, nuts, brackets, and various harware for their builds or full restorations. We are happily offering Zinc replating and chromating services for only $5 per pound now with a 20lb minimum requirement. Available in Olive Drab, Yellow, Blue, Clear, and Black. We have had alot of our clients asking if this is something we can offer so I decided to make a post to hopefully reach everyone. Simply mail your hardware in a usps medium/large flat rate box for cost effective shipping. For large shipments of 70lb or more I recommend putting in heavy duty 5 gallon bucket with lid. Then placing that bucket inside a sturdy box and using ups ground.

New shop truck.

If you have work finished by me (you know who you are) pay your bill before storage fees are added. Thanks and thanks

Beefy street/strip build underway.

Happy to annouce we are now stocking all of our B/K Series Differential Bearings directly from Nachi Japan. High Quality close clearance ball bearings with no extra middle men involved, which results in a more affordable product for our clients. When it comes to bearings and many other components, we do no trust them unless we see the Made In Japan stamp.

Needless to say we have been quite busy on all your builds, orders, and inquiries. Thanks for choosing us, we realize this industry is very competitive and cut throat. I can gaurentee the grass is greener over here. Very proud of what all my sponsored + affiliated drivers / we have accomplished so far. Seems like guys are winning payouts, getting podiums, or setting track records every weekend. I honestly cant keep up with all you guys progress enough, so keep it up! Tag me in this stuff as I cant watch every event!

Just over here late blooming. Dont mind me.