AEL Heat Exchangers UK LTD

If the demand on your DHW system exceeds the KW available from your boiler AEL will help design a semi-instantaneous system using an Alfa Laval Plate Heat Exchanger and the correct amount of storage required to satisfy the demand at peak times.

Please feel free to contact the AEL Technical Department to discuss your project.

Read more: https://aelheatexchangers.co.uk/semi-instantaneous-dhw-system-using-a-phe-and-cylinder/

Most Central Heating Boilers or Heat Pumps are very expensive and are protected by using a Plate Heat Exchanger as a system break, especially in old systems.
The Temperature Boiler systems tend to be very similar for 90% of the time, with the Primary hot water supplied from the boiler at 80 > 85 oC with the secondary radiator heating circuit being raised to get as close as possible to the original Delta t design of the radiators installed.
With this in mind, AEL has published all the technical information needed to select your PHE with prices based on the KW required for heating systems on www.aelheatexchangers.co.uk.

Please see more https://aelheatexchangers.co.uk/central-heating-system-break-heat-exchangers/

AEL are delighted to be able to supply the new Alfa Laval AHRI-approved CB210 Brazed Plate Heat Exchanger. ✔
Using the latest technological features gained from Alfa Laval's investment into research and development, the CB210 promises to boost your HVAC application's performance, helping you increase capacity and thermal efficiency!

Explore Alfa Laval’s portfolio of Brazed and Fusion Bonded Plate Heat Exchangers, including the CB210 and its Flex Flow feature all available from AEL Heat Exchangers UK Ltd :

https://www.alfalaval.co.uk/products/heat-transfer/plate-heat-exchangers/brazed-plate-heat-exchangers/cb/?utm_source=bss&utm_medium=linkedin&utm_campaign=bss&utm_content=link

Did you know, construction accounts for 36% of global energy consumption and 39% of carbon emissions? Fortunately, HVAC systems offer an enormous untapped potential for improving the climate impact of our buildings – thanks to Alfa Laval’s efficient solutions that reduce energy and water consumption.

As a trusted supplier within the HVAC sector with nearly 90 years of experience, Alfa Laval’s portfolio of plate heat exchanger technologies offers the most modern and efficient HVAC systems in a wide range of applications.

Looking to improve energy efficiency? Learn how Alfa Laval can accelerate the sustainability of your HVAC solutions: https://www.alfalaval.co.uk/industries/energy-and-utilities/sustainablesolutions/cleantech/energy-efficiency/waste-heat-recovery/hvac/?utm_source=bss&utm_medium=social&utm_campaign=bss&utm_content=link

Plate heat exchangers are one of the most efficient ways to transfer energy between two fluids at different temperatures whilst keeping both of them separated.
Plate heat exchangers are extremely energy efficient, because the energy required usually already exists within the system and can then be easily transferred to another system or process instead of just being allowed to cool down or be pumped out and wasted.

The realisation for the need to enhance sustainable energy has never been more prominent. The growing urgency to save and re-use energy to reduce environmental impact as well as finding ways to reduce the high cost of energy has placed greater emphasis on utilising the thermal efficiency Plate Heat Exchangers provide.
Plate heat exchangers are compact in design and use a series of thin plates such as stainless steel or titanium to transfer heat between two fluids. Plate heat exchangers were first introduced in 1923 for milk pasteurization but are now used in many applications in the HVAC, chemical, dairy, petroleum, refrigeration, pharmaceutical, food processing and healthcare sectors.

Feel free to read more at: https://aelheatexchangers.co.uk/how-efficient-are-plate-heat-exchangers/

AEL / ALFA LAVAL have an extensive range of Plate Heat Exchangers to cater for most fluids for any project.

If you have any special requirements specific to your project please send us your enquiry with your project details so we can discuss your project needs.

Should you not have all the information available send our Technical Sales Office what you have so we can discuss what is needed to quickly provide you with a detailed quotation with prices and all the technical information you will need for your project.

Visit our website at: https://aelheatexchangers.co.uk/

AEL supplies Alfa Laval AHRI approved Plate Heat Exchangers, AHRI is a globally recognized and industry respected third-party certification program that allows you the customer to differentiate between suppliers and provides the assurance and peace of mind that you are purchasing a plate heat exchanger of the highest quality.

When specifying Engineers and other decision makers purchase an Alfa Laval Plate Heat Exchanger that bears the AHRI Certified® mark, it will provide them with the added assurance that the equipment that they have purchased is manufactured using materials of the highest quality and that it will perform accurately and consistently in line with the design provided by AEL at quotation stage.

Read more at: https://aelheatexchangers.co.uk/the-advantages-of-using-a-plate-heat-exchanger/

Plate Heat Exchanger plates are made from a series of plates with a corrugated profile which creates turbulence as the fluid flows through the unit which scrubs and helps to reduce any deposits forming on the surface.

The Primary Hot Water (Red) will pass through every second Plate heating the Secondary Cold Water (Blue) which passes between each of the Hot Primary Plates instantaneously heating the cold water to a pre-determined temperature.

The arrangement of the plates, separated by a gasket, ensures that the primary and secondary fluids do not mix.

Additional plates can be added to increase a plate heat exchanger's performance without having to disconnect the pipework from the unit.

Read more at: https://aelheatexchangers.co.uk/plate-heat-exchangers-how-they-work/

The AEL “easy to use” Plate Heat Exchanger sizing calculator shown on our website only requires the KW output for a full technical quotation that includes prices.

Feel free to contact the AEL Technical Sales Department to discuss the suitability of an Alfa Laval Plate Heat Exchanger for your project.

Read more at https://aelheatexchangers.co.uk/alfa-laval-plate-heat-exchanger-sizing-calculator-prices/

A Plate Heat Exchanger instantaneously heats up fluids and does not have any storage which practically eliminates the possibility of any dangerous bacteria growth such as legionella.

The AEL Plate Heat Exchanger plates are usually made from 316 stainless steel with a corrugated profile. This creates turbulence as the fluid flows through the unit which also scrubs and helps to reduce any particulate deposits forming on the plates and extends the working life of the unit.

The four main factors that influence the growth of legionella are;
1. TEMPERATURE
2. WATER FLOW / STAGNATION
3. PARTICULATE MATTER
4. NUTRIENT SUPPLY

Don't hesitate to get in touch with us to discuss “How to eliminate Legionella”.

Feel free to have a look at our Tips & Advice at: https://aelheatexchangers.co.uk/using-a-plate-heat-exchanger-to-reduce-the-risk-of-legionnaires-disease/

Alfa Laval Stainless Steel Brazed plate heat exchangers are available to be compact in size and are a highly efficient method of providing instantaneous heat transfer between fluids in a heating system.

Using Alfa Laval high-efficiency Brazed Plate Heat Exchangers with Heat Pumps is an extremely cost-effective way of utilising every Watt of energy generated from a heat pump This provides a highly efficient heating system whilst protecting your expensive Heat Pump from debris or sludge in the pipework of a heating circuit.

Alfa Laval Brazed plate heat exchangers are used in a range of applications such as cooling, heating, evaporation, condensing and of course renewable energy which includes Heat Pumps.

Feel free to contact AEL Technical Sales Department to discuss how best to use a Plate Heat Exchanger with a Heat Pump.

At AEL Heat Exchangers, we strive to achieve not only high-quality products but the highest quality of service as well.

On our website we provide a Tips and Advice section which covers a variety of topics, to give you the best guidance on the possible questions you have.

Feel free to contact our Technical Department at [email protected] or contact us at 0151 336 8837, if you have questions about our products or to discuss any projects you may have.

A Shell and Tube Heat Exchanger has a cylindrical shell with a tube bundle in the center. The high thermally efficient tube bundle allows heat to be exchanged between the hot fluids flowing outside the tubes and the cooler fluid ( e.g pool water) flowing through the tubes.

Shell and tube heat exchangers are usually used in applications that require cooling or heating large volume of process fluids with minimal pressure loss even though this can quite often still be achieved with a Plate Heat Exchanger.

There is a choice of different types of shell and tube heat exchanger designed to suit different applications in most industries.

Read more here https://aelheatexchangers.co.uk/what-are-shell-and-tube-heat-exchangers/

The AEL Alfa Nova Swimming Pool Plate Heat Exchangers Are Only manufactured From 316 Stainless Steel And Therefore Are Suitable For Both Chlorinated And Salt Water Swimming Pools.

Feel free to contact the AEL Technical Department to confirm the correct Water Flow Rates, Temperature Designs or KW Outputs, to make sure the design is suited to your application.

Have a look at https://aelheatexchangers.co.uk/alfa-nova-316-stainless-steel-swimming-pool-plate-heat-exchangers/alfa-laval-instantaneous-plate-gasket-spa-swimming-pool-heat-exchangers/

BIM (Building Information Modelling) is a method of providing Architects, Engineers and Construction Professionals with mm accurate 3D modelling and a digital description of every component used in the design of a building such as Plate Heat Exchangers.

Using BIM gives Construction Professionals the confidence of knowing that the specified equipment is suitable for the space provided with other components and that the technical information that is automatically provided ensures the equipment will operate as required.

BIM provides a rotational digital 3D image of the specified equipment or component that is supported with technical information such as size, height, weight, flow rate, temperature etc.

Read more at https://aelheatexchangers.co.uk/plate-heat-exchangers-bim-or-building-information-modelling/

AEL are delighted to be part of Alfa Laval who are the leading global supplier of High-Quality Plate Heat Exchanger products, with Engineers that have many years of experience providing technical solutions for heat transfer, separation and fluid handling applications in the UK and around the world.

We are confident that the partnership of AEL and Alfa Laval will provide our UK customers with sound technical advice, the highest quality products and exceptional customer service with selected PHEs delivered within 5 working days anywhere in the UK by AEL.

AEL is a UK-based company which was originally established in the early 1970′s and became known for its pioneering work in energy conservation and heat recovery systems.

AEL Plate Heat Exchangers can be used for any standard or bespoke installation that requires fluid to be either cooled or heated instantaneously without the need for storage.

We strive for quality in our products and services, so feel to free to view our website or contact us to discuss anything.

Link: https://aelheatexchangers.co.uk/