Revolution Engine Services
Nationwide tuning & small engine services.
How is that for a sleeper , Barry’s pumpgas multi tuned nearly wrapped up. This is running one of our built / forged exchange engines , camshafts and tuned up real nice with the factory ecu. 570kw 24psi , pulsar 3584 , full boost around 3100rpm
07/11/2023
One of our mild pumpgas setups doing its thing. 519kw , Stock cams , 19psi , 3584 internal gate , stock zf transmission. All custom tuned with pumpgas on the stock ecu. .
05/11/2023
The books are now closed for 2023 💪🏼😎. All Dyno work considered but everything else will be booked for Feb 2024, thanks.
25/09/2023
If you like off road action , specifically trails truck madness check out the Haltech powered punisher racing truck we are wiring up this week, all new LS engine and powerglide transmission. These guys are all about the mud. The Punisher 231D Racing.
Got the truck back from powder coating last week.
Its been a big shift this weekend to get the truck fully assembled in 2 days
Massive thanks to everyone that came and lended a hand
Dropped off first this morning at Revolution Engine Services to be wired up with all the Haltech gear this week and hopefully fire up on friday arvo if all goes
18/09/2023
in for a high pressure fuel pump upgrade and tuneup, making good grunt , 28psi. . Stock vs tuned.
02/09/2023
How is that for a before an after shot!. Our FG Falcon “drive in drive out” Plus T turbo kits are nearly complete.
The end goal for this stage 1 package is an affordable & reliable 300+rwkw / 91 octane on an unopened motor, not limited to additional upgrades like oil pump gears etc at time of install.
Low volume cert available at time of install
Noise complaint turbo exhaust systems inc
Your Zf transmission serviced & tuned to survive ( 5speed or btr not supported )
500kw street upgrade option available at time of install.
02/08/2023
Another absolute unit wrapped up and back on the streets💪🏼. Karl’s Mk1 G6e came in running factory pcm , factory fuel system & in need of some more grunt.
We threw a whole bunch of new tech at it , with the i6 pro plugin ecu, a pair of haltech can gauges & flex fuel sensor.
‘s beautiful twin pump surge tank keeping up with the e85 & pump gas perfectly.
Pulsar Turbo Systems New Zealand delivering the boost.
480kw @ 20psi pump gas , 880nm
583kw @ 24psi e85 , 995nm
No lag , no traction , no worries💪🏼😎
750kw / 1000hp on our street legal pumpgas test mule , 35psi 💪🏼😎 Gull 98 / Waterm**h injection. Our low boost setting on 22 psi 730hp on straight pumpgas. Nitto performance engineering V2 bottom end.
For one of these engines you can find the Trademe link below or contact us directly. https://www.trademe.co.nz/trade-me-motors/car-parts-accessories/ford/engines/auction-4239687202.htm
For one of our built Zf 6speed hp26 transmissions you can find them on trademe or contact us directly. https://www.trademe.co.nz/trade-me-motors/car-parts-accessories/ford/gear-boxes/auction-4239687440.htm
Pulsar Turbo Systems New Zealand
678kw / 910hp / 1150nm on 36psi , full boost 3900rpm , Gull 98 and a small shot of water m**hanol injection, Run out of Wastegate spring unfortunately. nearly at our goal of 1000hp on pumpgas & WMI.
This car is featuring our “on the shelf ready to go” 1000hp exchange engines and built Zf 6hp26 Transmissions.
Thepartsman NZ Pulsar Turbo Systems New Zealand
Steve’s beast of a Ba falcon cranking out 495kw 21psi, 98 pump gas & little 3582 turbo, stock bf turbo motor.
30/05/2023
Check out Darryl Curran cranking out a 1.11 this weekend at the NZ Superlap Series On low boost!.
Their has one of our secondary bridgeport 13b turbo setups running 98 pump gas & is fully road legal.
NZ Superlap Final Round 2022/23 Season BTCHN7 Inside view of my fastest session from the weekend of the Final Round of Superlap here in NZ in my wife's (this weekend, approx.) 460rwhp FD RX7. MY first se...
16/05/2023
Tuesday tuneup 💪🏼. 350kw 14psi 9000rpm, 98 gasoline. Awesome engine and setup by .
11/05/2023
Another one ticked off the list is Adam’s all new 600hp pump-gas street . The S3 Rx7 has been gifted some top shelf gear with a pro series intercooler and a package controlling the engine & along with his . Thanks to for the guage cluster insert. .nz making this too easy , adding some great functionality & finishing touches front to back 💪🏼
18/04/2023
Our 1000hp exchange engine service is now up and running! These are a purpose built street/strip engine with no expense spared. Packed with top shelf forged parts, , right down to genuine coils, Sparkplugs , oil filter , thermostat and high quality waterpump. These engines come with a conditional warranty , full support & tuning service along with access to all of the great gear. We currently have the barra pro-plug-in ecu for your Ba-Fg falcons in stock and have more built underway. Your one stop barra shop🫡 .
Intake & turbo manifolds in stock, pulsar turbos & Fg intercooler kits also available.
A check up , transmission tune and some more boost for Sunny’s , making a stout 482kw/650hp on 20psi. Factory pcm , Stock motor , stock manifolds , pulsar turbo , npd100 gasoline. Fuel pump maxed out.
Just wrapped up Ashley’s . This old classic came in for a new , fuel system upgrades , some new 272/278 & spring package. The little 64/66 making a healthy 373kw on 14psi gate pressure & 493kw on 24psi. NPD100 pumpgas
21/01/2023
New load of Pulsar just arrived for install. 88mm 13b PP, couple of Barra 3584 upgrades , 71 & 79mm for a couple of boosted v8’s & a 54mm for a stock rb25det.
Jono’s awesome 13b semi pp turbo 808 wagon we built last year , 455kw on 22 psi and man does she go good on the tarmac. That 4” ss oval exhaust & twin wastegate manifold sounds the business, Staying super cool with the Vinny Fabrication intercooler & radiator.
Darryl and Sheryl’s back in for some maintenance and tuning before their next race event💪🏼. Darryl managed the fastest rwd lap ever at Pukekohe a couple of months ago in the street legal class with less power , watch out for the boss too! She’s pretty quick 😉
01/01/2023
#2 Nz stock car champ 💪🏼, we’re so Proud to be working with such an awesome father / son race team.
31/12/2022
And that’s a wrap!, #2022 is done. A whole bunch of real good buggers involved with this 13b Turbo PP build. .nz
20/12/2022
Just finished up Davids Resto-mod ready for some summer cruising. The old rx4 had the full treatment with a rebuilt engine , full cut Bridgeport porting. The 4 Barrel went in the bin to make way for the new ida, a new clutch & flywheel for the rebuilt gearbox & one of our short header exhaust systems . Credit to for the awesome engine bay refinishing & for all of our metal restoration. Gentle start to life making 202hp at 7000rpm.
17/12/2022
Wrapped up the second for the week today and she looks so clean ! trigger kit and great work by the team at Waikato vapour blasting has This semi pp looking sharp. With its big single turbo , catalogue & plenty of boost this power plant is going to sound awesome !
17/12/2022
Real nice short block we finished up today packed full of parts. Their super strong V2 I beam rods , drag series head gasket and custom pistons will definitely get the job done.
Run in tune all wrapped up for Paul Norris , 574kw / 770hp on 26psi 8600rpm. This is running one of our basic no frills Semi pp engines , hacked up FD upper and e85. Tapped out the injectors.
Ethan’s stock bottom end 2jz powered Altezza cranking out a whisker under 600hp - 25psi , Pulsar 3584 , 3” exhaust , plumbed in 50mm wastegate. **hanolinjection
550kw 24psi , only engine mods are valve springs and head studs on a stock motor. 98 pump gas , water m**h injection.
Videos (show all)
Website
Opening Hours
| Monday | 09:00 - 16:00 |
| Tuesday | 09:00 - 16:00 |
| Wednesday | 09:00 - 16:00 |
| Thursday | 09:00 - 16:00 |
| Friday | 09:00 - 16:00 |