My A320 Cockpit
I'm building an A320 Cockpit in my office.. totally worth the lack of space!
19/01/2022
Captains side hodgepodge panel
17/12/2021
Dark Version!
16/12/2021
MCDU assembled and backlit! Panel courtesy of the wonderful team at Homecockpits.fr!
15/12/2021
First MCDU test successful! Just have to add the status LEDs & wait for the keycaps to 3d print to align with the buttons!
First panel coming to life!
29/11/2021
We have some displays!
17/07/2021
And we’re back! I know it looks the same, but significant resizing of things had to be done to get everything to line up.. so here we go!
Yes, I'm still alive.. had to have surgery on my wrist to remove a cyst, so construction has been on hold while it heals, but it should resume shortly!
26/10/2020
Overhead is in place!
24/10/2020
Main Instrument Panel coming together!
21/10/2020
Overhead panel frame arrived this morning from www.homecockpits.fr Test fit all the panels, looks GREAT! All wiring still yet to do!
27/09/2020
Start of the Main Instrument Panel
18/09/2020
Shell Frame installed!
17/09/2020
Carpeting 90% done, frame starting for the shell
16/09/2020
First flight around Orlando!
12/09/2020
Floor laid, laying out the carpet tiles
11/09/2020
For scale, that square piece of carpet is 1ft x 1ft 😳
10/09/2020
Pre-Floor
09/09/2020
Gate 47A at LAX.. :)
03/09/2020
FCU logic board
02/09/2020
FCU LED/Backlight panel almost complete.
02/09/2020
FCU backlight/LED panel in progress
30/08/2020
Projector Realness!
28/08/2020
Master Logic Board for the FCU, both EFIS panels, wings, and Glareshield dimmers for panel & displays.. ironically, the small connector in the second pic labeled interface is all that's needed for all the control signals & indicators on all the boards. Yay multiplexers! :)
28/08/2020
Wing, EFIS, and FCU panel backlights/display/switch panels
28/08/2020
MCDU: Some assembly required.
26/08/2020
Projector Clearance checks, and floor placement
25/08/2020
Screen frame is up!
28/07/2020
Mini-Korry buttons for the FCU & EFIS panels.. 3d printed frame, holds the custom PCB in place, button fits on top, is held in place by the pcb & the outer panel itself.
Videos (show all)
