BM Quality Welding

BM Quality Welding

Small welding fabrication shop run by a ​qualified​​ welder.

Specializing​ in custom gates, trailers, repairs,​ and general engineering based in Christchurch-Harewood.

Photos from BM Quality Welding's post 06/12/2023

!!!6m Flat Deck trailer is available for hire NOW!!!

Deck size 6m x 2.1m with headboard up
Deck size 6.7m x 2.1m with headboard down

Pay load 2350 Kg

Trailer has multi-fit coupling for 1-7/8 and 50mm Tow ball.

All LED lights are rated to 24V and 12V.

Trailer has hydraulic braking system with booth axels braked and emergency brake-away system so you do not need any in CAB brake controller. Just hook up and go.

Trailer can come with aluminium ramps rated to 2200kg which can be stored under the deck if required.

This trailer is fully insured and comes with GPS tracker.

We are open 7 days a week and happy to meet you at our yard on Harewood road right next to the airport.

Half Day $100
Full Day $120
Week $500

All prices are inclusive of GST.

All trailers are build here in our workshop in Christchurch.

Give us a call on O21 O23 44119 to make a booking.
Thanks

Photos from BM Quality Welding's post 19/11/2023

Hydraulic Tipping Trailer

Photos from BM Quality Welding's post 19/11/2023

6m - Flat Deck with removable sides

Photos from BM Quality Welding's post 19/11/2023

!!!6m - Flat Deck trailer for HIRE !!!

3500kg - 6m Flat Deck trailer

Deck size 6m x 2.1m with headboard up
Deck size 6.7m x 2.1m with headboard down

Pay load 2350 Kg

Trailer has multi-fit coupling for 1-7/8 and 50mm Tow ball.

All LED lights are rated to 24V and 12V.

Trailer has hydraulic braking system with booth axels braked and emergency brake-away system so you do not need any in CAB brake controller. Just hook up and go.

Trailer can come with aluminium ramps rated to 2200kg which can be stored under the deck if required.

This trailer is fully insured and comes with GPS tracker.

We are open 7 days a week and happy to meet you at our yard on Harewood road right next to the airport.

Half Day $100
Full Day $120
Week $500

All prices are inclusive of GST.

All trailers are build here in our workshop in Christchurch.

Let us know if you have any questions.

19/06/2023

Flat Deck Trailer 6m x 2.1m

Trailers are in stock and ready to go right now.

This trailer is HOT DIP GALVANISE (the best protection you can get for your trailer) and not made from pre-galvanise steel (duragalv)

-14” Wheels - 850kg x4 (3400kg)
-each axle - 1750kg x2 (3500kg)
-tandem rocker equaliser springs - 3500kg
-heavy duty jockey wheel- 500kg
-2500Kg Hydraulic braking Coupling
-LED lights
-side markers amber/red
-Headboard 600mm High (total length of deck is 6600mm when headboard down)
-deck height 750mm
-TARE weight 1000kg

Headboard is secured by M20-Structural bolts which go through the headboard and main frame and not just welded pipe on the outside.

Decking is 45mm thick H4-T&G retaining wall timber secure down to the frame with double coated screws. We also install a tape barier between timber and steel to prevent direct contact of treated timber and galvanise surface.

Wheels are covered under folded boxes made from 3mm chequer plate so wheels are completely sealed from timber decking.

-fully welded frame with drawbar made from 150x50 and side rail 100x50
-steel is from the big local supplier and trailer parts are from CM Trailer parts.
-3 years WOF included
-NO Registration (you will need your own plate number)

1 year warranty on Trailer parts
5 years structural warranty (chassis/frame)

Extra:
-head board $800
-spare wheel $200
-ramps, stabilisators, locks and pockets $1300

Price of the trailer on the pictures with headboard ($800), spare wheel ($200), ramps ($1300) is $13 130+GST

We can supply trailer without the ramps which would be $12 000+GST

Different size of trailer also possible as all our trailers are custom made.

We can freight these trailers all over NZ for reduce rates.

We can also make this trailer with electric drums brakes system or mechanical brakes.

BM Quality Welding Limited is a small fabrication shop based in Christchurch with qualified welder who can deliver high quality products and is also certified to NZ standards.

Photos from BM Quality Welding's post 20/08/2022

4m Flat Deck Trailer

Photos from BM Quality Welding's post 20/06/2022

6m Flat Deck Trailer

Double axle braked trailer

This trailer is HOT DEEP GALVANISE not made from from pregalvanise steel (duragalv)

-14” Wheels with galvanise rims rated to 850kg x4 (3400kg)
-each axle rated to 1750kg x2 (3500kg)
-tandem springs rated to 3500kg
-heavy duty jockey wheel rated to 500kg
-2500Kg Hydraulic braking Coupling
-LED lights
-D shackles +safety chains

Decking is 45mm thick H4 treated timber with interlocking system secure down to the frame with over 300 screws with double coating protection. We also install a tape barier between timber and steel to prevent direct contact of treated timber and galvanise surface.

Wheels are covered under chequer plate boxes and with it is own mudguards.

-fully welded frame with drawbar made from 150x50 and side rail 100x50
-3 years WOF included
-steel is from the big local supplier and all the trailer parts are from Trojan and CM Trailer parts
-NO Registration (you will need your own plate number but we can assist with that)

1 year warranty on Trailer parts
3 years warranty on chassis/frame

https://www.trademe.co.nz/a/motors/trailers/tandem-axle/listing/3646202034?bof=MF4pHGWn

Photos from BM Quality Welding's post 13/05/2022

We have one Billboard Trailer 4.8m x 2.4m in stock right now. READY TO GO!!!

Videos (show all)

Website