Hebei tobee pump co.,limited

Tobee® Monoblock Inline Vertical Water
email:[email protected]
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: wwwww.tobee.ccn

Tobee® 4x3D-AH Slurry Pump is a standard horizontal dewatering pump for pumping abrasive slurries, designed for ultra heavy duty applications such as mill discharge, process plant and tailings, high pressure pipelines, as well as other specialty applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. The shaft seal could use the packing seal, centrifugal seal and mechanical seal. The discharge side can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 4x3C-AH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications, The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 65QV-SP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 65QV-SP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application. Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the SP Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
40PV-SP Vertical pumps not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 250TV-SP Vertical Slurry Pump is no submerged bearings or seals heavy duty cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® F6147U38 Poly Impeller for 8x6 AH slurry pump.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® E4083U38 Throatbush for 6x4 AH slurry pump.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® D3147U38 Impellers for 4X3D AH pumps.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® D3036MU38 frame plate liner 4x3D AH pumps.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® Tobeepump offers Submersible Slurry Pump Casings.
https://www.hydroman.cn/
https://lnkd.in/g-Mu3Ti
Emai:[email protected]
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com

Tobee® pump supplies 1800mm Immersion Vertical spindle rubber pumps 100RV to Africa.
Emai:[email protected]
Web: www.tobeepump.com| Web: www.slurrypumpsupply.com

Tobee® G8110A05A Volute liners for 8-inch metal lined pumps.
Emai:[email protected]
Web: www.tobeepump.comWeb: www.slurrypumpsupply.com

Tobee® E062E62 Labyrinth.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® Polyurethane Slurry Pump Wet Parts for Slurry Mining Pump.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 6x4E-AH Slurry Pump is designed for continuous conveying highly abrasive and high-hardness, high-concentration, low-corrosion slurries contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones in the tailing mining, minerals recycling, coal washing, industries of metallurgy, pulp and paper making, power plant, building material & chemical engineering, sand dredging etc

Design Features:

√ A large diameter with a short overhang ensure the rigidity of shaft, suitable for high power condition.
√ Hardened stainless steel shaft sleeve with ‘O’ ring seals at both ends. A slip fit allows the sleeve protects the shaft from the wear and corrosion.
√ The deputy vanes in both former and rear cover of Impeller relieve seal pressure and minimize recirculation.
√ Casing is made of ductile iron, ribs help casing to stand high pressure.
√ The wet parts are made of high-chrome alloy or rubber, having the abrasion-resist, corrosion-resist and impact erosion-resist properties, improved the service life of pump.
√ The wet parts are made of metal or rubber which can interchangeable or mixed use, suited different working condition.
√ Impeller adopt the method of wide flow and vane concave to improve flow and corrosion resistance, prolong service life.
√ The shaft seal may be adoptable of packing seal, expeller seal and mechanical seal to fit different working conditions.
√ The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
√ The bearing Assembly have the grease lubrication and oil lubrication are optional depend on the usage.
√ Adopted the oil lubrication bearing assembly can effectively lower the high operating temperature and reduce bearing fault
√ The grease lubrication bearing assembly easy installation and adjustment, simple structure and easy to maintain and perform reliably.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series.

Tobee® 3/2 D HH High Head Slurry Pump Design Features:

• High head, high pressure centrifugal end suction slurry pump design.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Hyper wear resistance materials for longtime worklife.
• Multi-stage high pressure operation allowed.
• Heavy duty construction with through-bolt design provides ease of maintenance and results in less down time
• Large diameter, slow turning, high efficiency impellers result in maximum wear life and lower operating costs
• Large, open internal passages maximize wear life and lower operating costs
• Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® DT Series FGD Gypsum Slurry Pump is a single stage, single suction horizontal centrifugal pump. Mainly used as the circulating pump for absorbent tower in FGD system. It has the advantages of wide range capacity, high efficiency, better energy saving etc,The wetted parts are designed with the CFD fluid simulating analysis technology to ensure its high-efficiency operation. DT series FGD slurry pump is optimal pump type for transporting gypsum slurry, limestone slurry or other abrasive and corrosive medium in thermal power plants.

Design Features:

√ DT series FGD slurry pump wetted parts adopt the advanced flow simulation technology to guarantee reliable design and high operating efficiency.
√ Corrosion resistant and wear resistant metal and rubber materials for options.
√ The special integrated mechanical seal design is suitable to Thermal Power Plant Fuel Gas Desulphurization process.
√ The bearing at pump end is double-row taper roller bearing, and bearing at drive end is cylindrical roller bearing. The bearings are lubricated with oil to longer the service time.
√ Achieve highest efficiency all the time by adjusting the bearing components to alter the impeller position in pump chamber.
√ The pump can be disassembled without dismantling suction or discharge pipes.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 300TJ high head slurry pump are cantilever, horizontal, single-stage, single-suction centrifugal slurry pumps. The ZJ series pump has the unique advantages of high head, high efficiency and energy saving. ZJ series slurry pumps are suitable for the abrasive or corrosive slurry containing solid particles, solid-liquid mixing concentration mortar 45%, pulp 80%, medium temperature ≤600℃.

Design Features:

√ Wet parts - Impellers, casing, liners are made of high chrome alloy, cast iron in anti-abrasive.
√ Bearing assembly - Tubular structure bearing assembly, design of high capacity bearing. Grease lubrication, oil lubrication helps to adapt to different operating conditions.
√ Shaft seal - Gland seal, Expeller seal, Mechanical seal.
√ Wide passage, non-clogging and good performance of NPSH.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 150ZJ-I-A65 Horizontal Slurry Pump is a new generation of centrifugal slurry pumps based on modern hydromechanics and mechanics theories, ZJ series slurry pumps are designed for heavy duty high head applications like ash removal in power plants and mining tailing, oil lubrication with water-cooling design makes the bearings always working at lower temperature, direct connected drive are always optional by trimming impeller to appropriate diameter and to get performance just in need, save the cost for variable-frequency motor. Specially designed liners and impellers structure help pump get higher efficiency and high head.

Design Features:

√ Single stage, single suction, overhang shaft, centrifugal, double casing, hard metal horizontal slurry pump design.
√ Base - A single piece base with integrated adjustment mechanism for impeller clearance within pump, bearing assembly locks into base using six or eight heavy-duty bolts.
√ Bearing assembly - all bearings assembled with highest quality tapered roller bearings in controlled environments to prevent lubricant and housing contamination, oversized shaft diameters and reduced overhang in the wetted end contribute to long life and reliability in the field
√ Impeller - hard metal impeller, pump out vanes on rear and front reduce recirculation within pump, and aid in preventing seal contamination, optional castings of straight or semi-Francis vanes offer wider hydraulic options in single sizes
√ Liners - heavy-duty hard metal liner, active engineered attachment mechanism to casing via threaded bolts as opposed to unreliable glue
√ Throatbush - adjustable via cotters to account for wear over time and increase efficiency
√ Expeller seal combined with packing seal and mechanical seal have been adopted to guarantee the slurry from leakage.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 10x8F-GH High Head Gravel Pump is designed for continuously handling the most difficult high abrasive, big particles slurries with extra high head. The wet parts are made of high-Chrome alloys to ensure long service life. GH gravel pumps has far better performance than common gravel pumps in dredging, sand mining, barge loading and mineral processing etc.

Design Features:

√ GH high head gravel pump is cantilevered horizontal centrifugal pump designed for handling the most difficult higher abrasive slurries which contain too big solids to be pumps by a common slurry pump.
√ Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
√ The discharge direction of pump can be oriented in any direction of 360°.
√ closed impeller with wide passage, good performance of NPSH and abrasion resistance.
√ All the wet parts are made of wear resistant high chrome alloy material. They are suitable for delivering slurry in mining, metal melting, dredging, barge loading.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® 3X2D HH high pressure slurry pumps DH2147A05 impellers.
Email: [email protected]
Wed: www.tobeepump.com | www.tobee.cc | www.slurrypumpsupply.cwww.slurrypumpsupply.com

Tobee® High-head slurry pump wet parts with white iron hard steel metal material for abrasive and corrosive flotation plant.


Email: [email protected]
Web: www.tobeepump.com | Web: www.tobee.cc | Web: www.hydroman.cn |

Tobee® alternative 100RV-SP Vertical spindle pump wear parts, vertical cantilever pump components, semi-submersible slurry pumps and spares supply.


Email: [email protected]
Web: www.tobeepump.com Web: www.tobee.cc | Web: www.hydroman.cn |

Tobee® E62 material of Labyrinth, bearing assembly end cover.
Email: [email protected]
Web: www.tobeepump.com | Web: www.slurrypumpsupply.comWeb: www.tobeepump.com | Web: www.slurrypumpsupply.com

Tobee® E4110 Volute Liner and E4083 Throatbush.
Email: [email protected]
Web: www.tobeepump.com

Tobee® F028A05 Expeller for 8x6F-AH.
Email: [email protected]
Web: www.tobeepump.com

Tobee® F6110A05 slurry pump volute liners for 8x6 slurry pumps.
Email: [email protected]
Web: www.tobeepump.com

Tobee® C063HS1P05 Lantern Ring for 4x3CC
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® C075C21 Shaft Sleeve for 3x2CC
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® C117C21 Shaft Spacer for 3x2CC-AH
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® DAM117C21 Shaft Spacer for 3x2DD-HH
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® EAM076C21 Long Shaft Sleeve for 10x8E-M
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® 3x2DD-HH Slurry Pump Wear Parts
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® Bearing E009 for 10x8E-M Pump
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® CAM3041HS1A05 Discharge Plate for 4x3CC-AH
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® DH2147A05 Impeller for 3x2DD-HH
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com

Tobee® SV15005L Bearing Assembly 1800mm
Email: [email protected]
Wed: www.hydroman.cn | www.tobeepump.com | www.tobee.cc | www.swww.tobee.ccply.com