GMS 3D
3D printed parts for RC cars
Working on some F1 inspired wheel dots for the jaco foam tire. These two would be the McLaren and Ferrari teams  I can also change the Perelli coloring to represent different different compounds
Right now it’s just in the computer but mudboss foam tire Pirelli F1 with the mclaren center cap
Premade inventory Bogo:
DM to order
I have a stock of foam wheel dots, and soda can shock rebuild stations that I am offering at buy one get one.
Current inventory includes:
Soda can rebuild station
2 grey
2 orange
1 Red
1 yellow
1 blue
Foam wheel dots:
3 Pikachu Pokémon ball
2 Pokémon ball
1 white and black arrow
1 black and white arrow
1 three tab red black
1 three tab black red
1 three tab yellow black center filled
2 bead locker black grey
1 Deadpool
2 Hoosier radioactive
2 Hoosier split Center red white
1 Hoosier split center grey
1 Hoosier split Center grey yellow
1 Hoosier Split Center, White blue
1 Hoosier split center yellow green
 Bogo only applies to above listed as long as they are in stock. Printing additional does not count towards the Bogo rate.
The wheel dots are $30 shipping included
Soda can rebuild stations are 15 shipping included wheel dots can select a second set or a rebuild station. Rebuild stations will get a second rebuild station.
A project I’ve had for a couple seasons now has come to an end. Here are the final trophies for the NIL & FFRL on Iracing.
These were done as a light box and have a usb strip light inside
Sometimes when you get an idea you just gotta run with it. These arms I made for my ghost rubber tire late model each set has something different to it, some are longer or shorter some have the outer end of the arm set forward or backwards and some have a combination of adjustments.
working on a new square point of sale, link is on the page and I will be adding GMS parts to it in the near future
Working on a part redesign today for the B6 series fan mount. New design can do 30 or 40mm fans it also has mounting holes for a 2nd fan
Still keeping the $13 shipping included price from the original design.
Currently working on outfitting a new race trailer and definitely will be incorporating some 3D Printed stuff in the build. Up first is some functional parts I designed, a housing for my custom 12v system and some retaining end caps for my lights. Both are admittedly boring designs but they are purely functional, printed in glass filled ABS.
Dustin Tunstall owner of MuddBugg MotorWurks and GMS 3d driver takes the win at APEX for the Tour nationals
Big bag of brass has arrived… new part announcement coming soon
Truck is loaded and on the move off to Motorama 
Disappointing end of the snowbirds for me, SK was actually better than expected. I was middle of the B main. mudboss ended up qualifying B main lead the majority of the race got wrecked, but ended up working my way back to a transfer position started 13th A main worked my way up to eighth or ninth and then problems happened and I ended up parking it during the second stage. Unfortunately, this year‘s event for me was if something could go wrong definitely did one of my worst on track performances in quite some time however, everything around the event was definitely worth the trip.
My office for the next 5 days
Packed up and on the move it’s The 2024 Snowbird Nationals time
Snowbirds racers as you can see I got a large tote full of parts everything I make for mud boss, as well as a few pit towers. If anybody needs wheel dots, nose clips, fan mounts, or the rear body mount clip, I will have plenty in stock. as usual, I will be pitting in the hallway just outside the cracker room.
Just a quick calendar of events here I am officially closing up for the snowbirds. I’ll reopen 2-5 for one week I will then be closing up 2–11 for motorama expecting to open back up on the 20th 
The print shop has gone quiet and the race equipment has emerged from the RC trailer. Almost Snowbirds time.
im setting the cutoff date for snowbird parts as saturday the 27th and motorama as feb 10th
this is for event pickup items.
This is just a first draft but working on a add on part for the pit tower to enable a HCG slash to sit on the tower. These will just slide on and the plan is to have a screw hole in the side to secure it with a M3 bolt.
Here is a look at the new designs for the rubber tire wheel dots for the traxxas rim
Primary focus is definitely snowbirds right now but I do have motorama as a secondary focus and I am working on new designs for wheel dots for rubber tire for that race. Starting with the pokeball
Another newish project ready for release is the pit tower. This will come with 2 car stands, an icharger (or similar) stand, 6 piece tool holder, & hudy setup station holder.
The base can have a 2nd color added and I can mix & match colors throughout the tower.
$125 shipping included
I plan on having a few pre built on hand at the snowbirds
Made a couple tweaks to the soda can shock rebuild station. The new design is ready for release if can handle big bore and standard sized shocks and will be available in multiple colors
$15 shipping included DM to order
Still working on new wheel dot designs for the mudboss jaco foam tire. I added an extra color to the Hoosier and for snowbirds pickup only dots with the race logo on it.