Kleins Welding

More 940 fun!

Another backfiller will buit for an excavator to speed up backfilling tile trenches

Some more segment build up

More of the stairs we put up today with fehring iron works something different and fun

Put together some 24" and welded a pull head on to go under the road for some field tile today

Installed a thumb on Komatsu hoe this morning onto the next

Little pipe welding for a field tile job!

Equiped for all your field needs!!

Been super busy with these 940s and 50s get with us before or after spring to get that tounge fixed!!

Another one air arced and fitted up ready to weld out many more to go if you have a 940 or 950 get a hold of us

We are now accepting applications for our 2023 season! 🍦

Requirements:
•Must be at least 16 years old.
•Able to work at least 6-15 hours per week - this will vary.
•Must be able to lift 20 pounds.

•You CAN be out of high school•

There will be a hiring process you will have to go through this year if your application is approved.

Your application can be turned into Morgan Haycraft or sent to email —> [email protected].

We will start reaching out to applicants by the 16th of January.

Another one done! These are the best thing you can do to a 940 tool bar

Swapped out an auger in a 10 ton fertilizer blender today

Finished product ready for the field

Another set of hitch mounts on a 940

Little bucket repair today

Boot for 30 inch dual wall we just finished up!

Not our normal work but we had some time so we did some commercial fence for a customer turned out great 4x4 metal post and 2x3 metal runners he will be covering it with wood slats

Been super busy but repaired a cracked frame on a tender truck today

Building up segments on this wheel machine to get it ready for another year

Sunday funday repairing a walking tandem on a soil finisher

Track adjuster and link removal on this beautiful day!

Bad rear idler and some other things on this d6 now if the rain would just stop

Been super busy haven't had time to post but here's a job we just finished a hitch to pull this plow and a weight bracket on the side to put a 2000lb Weight on to help traction while turning on to the next!

Little bit of hard facing on an older tile plow today!

Been super busy but here's a small job I did this morning 2 new idlers on a 323

Big project last two days on a 940 24 knife anhydrous bar I don't think it will break again!

I know it's been a while since posting we have just been super busy
, another d6 from system 1 to heavy duty standard tracks sprokets rollers and idlers in under 18 hours

All done with the welding, just put the tracks back on and we will good to go

After a long morning of air arc we are ready to put it all back together tomorrow

Continued work pn tile plow today pulled roller frame to find a broken mount tomorrow we will be cutting mount off and welding on new

Replaced some broken shifter linkage and got rid of a sticky decel pedal today on a d5 also machining some pins to remove a link out of tracks to get rid of some excess wear

Working on a cutter crimper that was catching the tile as it went trough on this fine day

Finished the wheel today after putting new guides on after we finished building up sprocket segments

Been welding on this hydramax wheel machine for two days building all of the teeth back up ready for another season now also removed old guides and welded new all the way around the wheel

Getting set up and ready to build up all the teeth for another season on this hydramax wheel machine