Get It Gone MotorSports

I didn’t let Hurricane Debby down me. Guy purchasing car had a tight deadline on making an upcoming race I said no problem we might get a little wet but let’s do it. Me and Douglas Horween hit the road and made it happen safely.

I Completely took care of this transaction from start to finish. Stored at are shop ✅ Prepped and Advertised ✅ and Delivered ✅.

We always stand for Racers by Racers in this case Rain or Shine 💪🏻

Get It Gone MotorSports

⛽️ Pump Gas 632 Big Block Chevy ⛽️

632 BBC
10:1 Compression
Dart Block
Profiler 24 degree Conventional Heads
Intake Converted To EFI with Rails
Induction Solutions Fogger
Manley 4.750 Crank
Callies Rods (steel)
Melling Billet oil pump
JE flat top pistons
Comp Solid Roller Cam
All Arp hardware
Moroso 8gt oil Pan
SFI Approved Flexplate
Power Master Pro XS Torque Starter
ATI Super damper

$24,000
Located in Florida 561-662-3727

Just A little July Recap of what I been up to lately. Where some say it’s slow and nothing sells. I find ways to make it happen and Get It Gone 💪🏻. Whose next ?? Get It Gone MotorSports in the building !

1987 Camaro Small Tire Roller $34,900
25.3 Cert (Current)
fiberglass doors
1pc front clip
Dual ljrc air chutes
Optic armor windows front&rear
Car is currently wrapped red was painted white previously.

Tubular front end and a arms
Wilwood disk brakes front and rear
AfterWorks front Double Adjustable struts
Trz steering column

Rear End: Moser 9” floater
All alum 40 spline bolt thru center (3:89)
Menscer canister Double adjustable shocks
Torque arm setup

Rc Comp Wheels
15x3.5 on front 26” tire
15x12 Double Beadlocks and 295 et street r tires (4passes)

Electronics:
Holley Dominator
7” screen
Roll bar Switch panel
MSD Grid for ignition source red and black box
It has EGT’s along with oil,water,fuel pressure,volts,iat,boost etc.
C02 for chutes and boost control

Turbos are precision 88s (4 passes since freshen from precision)
All stainless hot side setup for 9.8 deck bbc
Powdercoated cold side
Turbosmart gates

Car has a air to water ic3000 intercooler setup and car was ran on q16 fuel

This car and setup has been 4:11@186 in ldr trim at over 3300lbs. It is currently setup on 295s to run in ldr trim

Car is ldr legal and can be x275 legal with correct engine combo or ran in no prep.

$34,900
Located in Vero Beach,Florida
561-662-3727

7xx 5” bore space Built by BES Racing Engines
All Aluminum
EFI
Donovan Block
Sonnys Heads
Multiple Kits

Very strong running engine has been real fast !

Will give more info to serious buyers
$62,000
Located in South Carolina

Nitrous Small Block Chevy 434
10 passes since fresh
Complete carb to pan
Engine has been 4.xx at 3100lbs on a 275 Radial

Dart iron eagle Tall Deck Block 9.325
Howard/callies crank
Venolia aluminum rods
Diamond nitrous pistons
Brodix -15 heads
T&D shaft rockers
Isky lifters
Custom intake
Pro systems 1200 carb
Jesel belt drive timing set
Sam vincent custom ground cam
Jeff Johnson dry sump oil pan
Big cap msd distributor
Induction solution x275 fogger
Msd crank trigger
Stefs Dry Sump Tank
Dailey Engineering Dry sump oil pump
Power master starter
Flex plate

$18,500

Also will include a set of headers

have all Nitrous flow sheet/tune up info
Can ship if needed

Located in Florida

⭐️ATTENTION⭐️

2000 camaro
Double Frame Rail 6.0 cert
4-Link
Precision gen 2 94 mm turbos
540 bbc all aluminum Brodix with head hunter hhx heads.
M&M Turbo 400 2 speed
M&M Converter
M&M Shifter
Holley Dominator MSD Pro 600
Menscer canister Rear Shocks
Full floater 9.5 rear
20 lbs fire system

Car will run the number and be very competitive !

Serious Inquires only 📥

$140,000
Located in Vero Beach,Florida

Tim McAmis 1968 Camaro Roller..Titanium Backhalf
Car is VERY LIGHT !! Well known good working ride
$79,000
NO TRADES !

1979 Malibu Roller
Double Frame Rail Chromoly
Setup for Big Block and Turbo 400
4-Link Rear Suspension
Fab 9” Rear End
Menscer Double Adjustable Canister Shocks
Shock Travel Sensor front and rear
M&M Shifter
Strange Front Brakes
TBM Rear Brakes
Double Beadlocks rear wheels

Proven working car has been fast !
Located in South Carolina
Pm for more info or call/text 561-662-3727

Father’s Day Special. Get dad that gift he deserves.

Have a New TRE all billet Stock Bore Space Small Block. Completely gone through or if that is not big enough how about a EIC Purpose Built Extreme 4.84.
Both engines on stands ready to go no wait !

Your choice of either engine for $67,500

Which one are you picking !?

💥ATTENTION 💥

Considering selling Turn Key ready to hit the track tomorrow

2000 camaro
25.2 Certified all best stuff
Precision gen 2 94 mm turbos
540 bbc all aluminum Brodix with head hunter hhx heads.
M& M Turbo 400 2 speed and M&M Converter
Holley Dominator MSD Pro 600
Menscer canister Rear Shocks
Full floater 9.5 rear
20 lbs fire system

Car will run the number and be very competitive !

Serious Inquires only 📥

Have this real nice Nitrous Small Block Chevy 434
10 passes since fresh
Complete carb to pan
Engine has been 4.xx at 3100lbs on a 275 Radial

Dart iron eagle Tall Deck Block
Howard/callies crank
Venolia aluminum rods
Diamond nitrous pistons
Brodix -15 heads
T&D shaft rockers
Isky lifters
Custom intake
Pro systems 1200 carb
Jesel belt drive timing set
Sam vincent custom ground cam
Jeff Johnson dry sump oil pan
Big cap msd distributor
Induction solution x275 fogger
Msd crank trigger
Stefs Dry Sump Tank
Dailey Engineering Dry sump oil pump
Power master starter
Flex plate

$19,900

Also will include a set of headers

have all Nitrous flow sheet/tune up info
Can ship if needed

Located in Vero Beach,Florida

Baddest shifter in the game 😮‍💨. Peep that custom engraving ✍️ .

EIC 7xx ci 4.84 11.7 deck height. Best of everything no expense spared. Engine has been fast and is very competitive, has very low runs on it. Would be a top player in 4.84/LDR with the right car. Less than 30 runs since new. DM for more info and pricing. Have a new M&M lock up convertor for this setup also available.

Need the Space !! Deal of the day $19,999

2023 Anvil 32 ft +2 v nose Extra height with extended tongue and finished interior. Tool cabinets Electric jack, stereo system LED lighting, Winch ,inverter and battery system, Winch in rear. spare wheel and tire. Pitpal Door Ramp and Some Pit Pal Accessories. Ready to hit the road.

Located in Vero Beach, FL 561-662-3727

Twin Turbo Thursday 😉 Get It Gone MotorSports

1983 Monte Carlo Turn Key
ASAG
Big block Chevy Nitrous
ATI Turbo 400 2 speed
9” Rear End
Marty Merillat Torque Boxes
Menscer Rear Shocks
Afco Front Shocks
RC Comp Double Beadlocks
Strange Center Section
Strange Brakes front and rear
PST Carbon Fiber Driveshaft
Racepak Sportsman and IQ3 Dash
AMS 2000 Nitrous Controller
MSD Power Grid
Precision Shifter
Ice/Water Tank
Title
$39,000

This is a new build Turnkey ready to hit the track
Will give more details to serious inquires

Located in south Florida

1968 Camaro X Jim Halsey/ Billy Glidden car
Built in 2009 by Tim McCamis Race Cars
Updates done in 2018 by Billy Glidden
Setup for 5.3 Big Block
Car is loaded with Titanium front to back
Titanium Backhalf
Carbon Fiber Body
Carbon Interior
Lamb Carbon Brakes
Lamb Struts
MVM Carbon Wheelie Bars
Haltech Electronics
Mark Williams Modular Floater Rear End
JRI Shocks

Car is VERY LIGHT !!
Well known good working ride
Has been 5.70s in the 1/4 3.70s in the 1/8th

$98,000 OBO

Located in Vero Beach,FL

Front End Friday with the twins 😎.

Race season is in full Swing with that being said how about a little mustang Monday to get this week started. Jump into your new ride today ! Send a 📥 if one these Catch your eye for info and pricing.

.

1990 Mustang Roller
Current 25.3D 6.50 Cert up to 3600lbs
Steel Roof and Quarters
Double frame Rail
Setup for Small Block and Turbo 400
Legal for many different classes
Factory Frame Rails
Factory Floors
Ladder Bar Rear Suspension
20lb Fire System
Carbon fiber Interior
Carbon Fiber Tubs
Carbon Fiber Seat
Fiberglass Front end Hood Bumpers Doors Hatch
Fab 9” Rear End
Strange Center Section
Strange Struts
Strange Brakes
PST Carbon Fiber Driveshaft
17” Weld V-Series Spindle mount wheels
Weld V Series Rear Double Beadlocks
M/T Pro 275 tires
Stainless Zoomies
Stroud Dual air launcher parachutes
Racepak Dash
Holley Dominator
MSD PowerGrid
8 MSD wide band 02s
8 EGTS
$48,000

Very well built high quality car !
Located in Vero Beach,FL 561-662-3727

Brand new fox body coupe mustang
Built by Cameron Johnson Race Cars
Purpose Built Light Weight Roller
Setup for Small Block and Turbo 400
Loaded with Titanium and Carbon front to back
Marty Merillat rear end
Menscer rear shocks
Weld V-Series 17” front wheels
Weld Alpha Double Beadlock Rear Wheels
$69,000

Also a new FuelTech FT550 system can be bought with car for additional $$

Located in central Florida

Happy Valentines Day ! Showing love to these 3 Red beauties that are hot and ready for there new homes.

*Price Reduced *
427ci Small Block Chevy
Engine has been 4.67 at 2850lbs on a 275 Radial
Made 775hp on motor on a stingy dyno.
Only 6 passes since Fresh

Originally Built by EIC Motorsports
Complete Carb to Pan
Dart Lil M Block
All Pro 245 heads 23 Degree
Jesel rockers
Callies crank
Callies steel rods
Cp pistons
Moroso Oil Pan
Moroso Vacuum Pump
Jesel Belt Drive
ATI Balancer
MSD Crank Trigger
Induction Solutions Fogger
CFM Dominator Carburetor
BES Valve Covers
Flexplate
$17,500

Comes complete as you see it. Motor plate engine stand included.

Motivated Seller Can meet in South Georgia this week or Ship Engine if needed.

Located in Vero Beach,FL 561-662-3727

⚡️ The Agitator G-Body ⚡️

1985 Cutlass Supreme With Title
4xx Small Block Chevy 23 Degree
Coan Turbo 400 Transmission
Coan Converter
8 point Cage with swing out bars
EKR chassis brace kit
EKR Built 8.5 rear end 3.73 Gear
EKR Fiberglass front bumper and back bumper
EKR fiberglass trunk
TRZ components upper and lower torque box
Afco double adjustable front shocks
QA1 Double Adjustable Rear Shocks
RC Comp Front Wheels
RC Comp Single Beadlock Rear Wheels
MSD 7AL-3 Ignition
M&M Air Shifter
2 16 volt Go-Lithium batteries
Magnafuel 500 fuel pump
Strange 33 Spline Axles
Strange Brakes

12 passes since engine was fresh
Clean Title in hand.
Very clean solid body
Car has been pretty fast on a conservative tune up
Car is turnkey ready to go to the track !
Will give more engine details weights ETs to serious buyer

$34,000
Located in South Florida 561-662-3727

Small Preview of what’s to come 😎. 1968 Tim Mccamis Camaro loaded with all the carbon fiber and titanium goodies. Seeing it here first .

1988 Ford Mustang
8.50 Cert
598 BBF
Ford motorsports a460 block
Trick Flow A460 Heads
Crower Rockers
Je pistons
Grp aluminum rods
4.500 stroke Crank S**t
1 Kit Fogger

J.W. transmission 1.69 gear
Transmission specialities converter
Cheetah Shifter

MSD Grid Ignition
Nos Launcher
ProLite Battery

4 link
Dana 60 Rear 3.73 gear
Strange Struts
Strange Brakes front and rear
Weld Racing black Aluma star front wheels
Weld Racing Double Bead locks Rear wheels
M/T Pro 275 Tires
Afco Double adjustable Big Guns Shocks
VFN Fiberglass Front End And Hood
Fiberglass Doors

15 passes since engine was fresh
Makes about 1000-1100hp on motor plus nitrous
Comes with 2 new spare pistons
2700lbs race ready
Car runs very good on a conservative tune up
Turn Key Track Ready add Fuel and Go !
Located in Osteen,Florida