Dr Hamid Implants
GDC: 154982 | BDS (Bristol 2008) | DipImplantology (Bristol 2018)
06/02/2023
Case of the week;
This week's case is of a failing lower right first molar replaced by a screw-retained BioHorizons implant crown
The molar was initially sectioned and atraumatically removed and the socket debrided.
This was then left to heal for three months to allow for bony infiltration and healing.
CBCT scan was then taken and a 4.2×10.5 tapered pro Biohorizons bone level Implant was placed.
This was left to heal and then restored with a carefully contoured screw-retained crown, beautifully made by technician Jake Evans
A lovely result for a lovely patient
Let us know what you think in the comments! ✍️🙌
03/02/2023
Don't let fear hold you back from achieving your goals. Step out of your comfort zone and trust the journey.
Remember, progress takes time and effort, but the results are worth it. 💪
JOIN US on the 24th and 25th of March 2023!
𝗚𝗲𝘁 𝗵𝗮𝗻𝗱𝘀-𝗼𝗻 𝗲𝘅𝗽𝗲𝗿𝗶𝗲𝗻𝗰𝗲 𝗮𝗻𝗱 𝗸𝗻𝗼𝘄𝗹𝗲𝗱𝗴𝗲 𝗹𝗶𝗸𝗲 𝗻𝗼 𝗼𝘁𝗵𝗲𝗿 𝗰𝗼𝘂𝗿𝘀𝗲 𝘄𝗶𝗹𝗹 𝗴𝗶𝘃𝗲 𝘆𝗼𝘂!
Get in touch to find out more and book your place.
27/01/2023
Want an opportunity? We have courses available for March 2023 to improve your Dental Implantology skills.
Leave a YEAH! in the comments section if you're attending!!! 🙌👋
Link below!
This Oral Surgery Course is open to all dentists, not just those who practice in dental implants and will take place in person over 2 days.
Learning Aim
This course offers GDPs & Implant Clinicians the opportunity to upskill and enhance their oral surgery skills through online training and hands-on practicals on cadavers.
Visit Education - Education (theimplanthub.com)
https://education.theimplanthub.com/
Case of the week
This patient came to visit us with three loose teeth and a large upper bulky denture, which he was fed up with.
After discussing all the options, we decided that the option the patient wanted to explore was to have fixed upper teeth.
The remaining failing teeth were removed, and four implants are placed, with good anterior-posterior spread, to allow the patient to have a fixed prosthesis
These are the before and after pictures from the day of surgery
This is the temporary acrylic bridge, which will stay in place for three months until we replace it with a definitive bridge.
Already, we can see the cosmetic improvement, and the patient is very happy that he doesn’t have to wear a denture anymore!
Tell me...What do you think?! 🤔✍️
20/01/2023
Michael Jordan is right! Never Say NEVER. Push through those barriers and face difficult challenges that face you and I can guarantee you won't regret it!
What barriers have you been pushing through lately?
Let's discuss this in the comments...
19/01/2023
This Oral Surgery Course is open to all dentists, not just those who practice in dental implants and will take place in person over 2 days.
Learning Aim
This course offers GDPs & Implant Clinicians the opportunity to upskill and enhance their oral surgery skills through online training and hands-on practical's on cadavers.
Get hands on! 🙌
(theimplanthub.com)
13/01/2023
Are you looking at expanding your implant restoration knowledge?
Take a look at the upcoming Implant Restoration Course in March 2023.
Ideal for both dentists wanting to learn new tricks and techniques to improve or maybe you are a dentist who is just starting out in implant restoration. This course is multi-inclusive.
This Oral Surgery Course is open to all dentists, not just those who practice in dental implants and will take place in person over 2 days.
Learning Aim
This course offers GDPs & Implant Clinicians the opportunity to upskill and enhance their oral surgery skills through online training and hands-on practicals on cadavers.
Get hands on! 🙌
Visit
Education - Education (theimplanthub.com)
11/01/2023
If you keep meaning to increase your oral surgery skills but life has previously gotten in the way of these plans don’t give up on the idea completely, keep striving for your goals. Let's champion those goals this year... What's yours??
Our MAG oral surgery course is easily obtainable.
👉 Learn new skills, make connections with other like-minded dentists and benefit from ongoing mentoring!
For more information check out our course page, OR if you have any questions please feel free to DM me.
📱 https://learnoralsurgery.co.uk/
09/01/2023
Teeth in a day, What are your views on this?
Let's start a chat in the comment section...
What are some success stories and learning curves that Same Day Teeth have given you?
New course date: March 24th 2023
Visit the website link in bio for more information.
https://learnoralsurgery.co.uk/
06/01/2023
TRY, TRY AND TRY AGAIN 🦷🔩
This patient came to me at the end of 2020, fed up with their upper denture and rightly so! After careful treatment planning, the decision was made to provide them with 4 BioHorizons implants and an immediate bridge; followed by a definitive bridge 3 months later.
This image is the final try-in prior to the definitive being processed. The final try-in is the last opportunity to check for passivity, aesthetics, occlusion, and importantly comfort.
I feel so privileged to be able to provide life changing treatment for this real gentleman of a patient :-).
Thankyou .dude.uk for the awesome lab work as ever 💪🏽
04/01/2023
The reason why first impressions are so important is that they last well beyond that moment.
This is thanks to something called the primacy effect, which means that when someone experiences something before other things in a sequence, they remember that first thing more.
Any negative first impressions you give will set the tone for the relationship that follows.
Let's start 2023 on the best impression. Who agrees?? 🔥💪👇
02/01/2023
S U R G I C A L 🦷 E X T R A C T I O N S
Swipe 👉 for a couple of referrals for extractions completed recently.
Case 1 - UL7 broken down and looong roots !
Case 2 - LR8 close to the IDN.
Good technique + knowledge of anatomy = safe oral surgery.
How confident are you with your oral surgery?
27/12/2022
Be the change you want to see! 💪
If you keep meaning to increase your oral surgery skills but life has previously gotten in the way of these plans don’t give up on the idea completely, keep striving for your goals.
Our MAG oral surgery course is easily obtainable.
👉 Learn new skills, make connections with other like-minded dentists and benefit from ongoing mentoring!
For more information check out our course page, OR if you have any questions please feel free to DM me.
📱 https://learnoralsurgery.co.uk/
22/12/2022
CASE OF THE WEEK 🦷
I had to reshare this case from a while ago showcasing that if you treatment plan effectively, it is possible to achieve brilliant outcomes for patients even with the most technical of surgeries.
UR6 extracted a few months earlier and left to heal.
CBCT scan taken, highlighted reduced bone height available but, thankfully, sufficient bone width for implant placement. Implant placed using an internal lifting of the sinus membrane with osseodensifying burs.
A 4.6 x 9 implant placed with great stability in a restoratively favourable position. A very technically sensitive procedure but one that went ok this time thankfully. The ‘halo’ of the autograft was very reassuring 👍🏽 Can’t wait to restore this implant for this lovely patient.
T H R O W B A C K
A lovely lower full arch case for you today 🙏.
This patient had suffered and put up with a with a loose and poorly fitting lower denture for years, and still had an upper denture which she struggled with.
She decided to go for lower ‘fixed teeth’ and so an FP3 restoration was constructed and after 3 months of having her temporary fixed teeth, we fitted the definitive fixed full arch FP3 bridge.
The bridge is held in by 4 BioHorizons tapered pro implants which offer ideal properties for immediate full arch restorations.
The end result is a bridge with beautiful aesthetics, occlusion bang on, coupled with passivity and cleansibility.
Thanks to for helping me plan and execute this case and .dude.uk for the lovely lab work.
Such a privilege to be able to provide this patient with fixed teeth, a beautiful smile and an improved quality of life. Hopefully the uppers will be next!
.dude.uk
Case of the week
This weeks case is the replacement of a failed upper left first molar tooth with a biohorizons bone level implant.
Unfortunately this molar tooth developed a crack in it and had to be removed.
The tooth was removed atraumatically, and best attempts were made to preserve the bone as much as possible.
The socket was then left to heal for three months.
Once healing was complete, a CBCT scan was taken, and a 4.6×9mm BioHorizons bone level implant was placed.
The implant was left to integrate for a further three months , and then restored with a screw retained crown expertly designed by Ed price
A simple delayed protocol followed to achieve a predictable outcome, using a predictable system
🌟 𝗗𝗠 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝗮𝗻𝗱 𝗮 𝗰𝗵𝗮𝘁!
07/11/2022
🙏🏽 If the master and legend that is Bruce Lee says you must practice, then you must!
Oral surgery skills require patience, perseverance, guidance and most of all, practice.
Come learn and practice with us on our next Oral Surgery Cadaver Course for GDPs
🌟 𝗗𝗠 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝗮𝗻𝗱 𝗮 𝗰𝗵𝗮𝘁!
This week's case is the replacement of a missing lower right second premolar tooth.
The tooth was extracted atraumatically due to an unrestorable fracture and the socket was left to heal for three months.
A 3.0 x 10.5 BioHorizons Bone level implant was placed and left to heal for 3 months.
Once uncovered, simple impressions were taken to allow the construction of a screw-retained crown, beautifully made by Ed Price
3.0 implants are often a very good option for narrow spaces, especially if they are made of grade 5 titanium alloy. BioHorizons implants range from 3.0mm diameter to 5.8mm, and so can be suitable for a wide range of clinical scenarios.
A lovely result for this patient
02/11/2022
As I’ve become more experienced, it has dawned upon me that managing patient expectations is crucial to all treatments, but especially implant treatments.
This case could perhaps be improved with maybe the use of a connective tissue graft, or the use of ‘palatal wings’ to reduce the appearance of the black triangles.
However, I have shared it to show that not every anterior implant case ends with a perfect aesthetic result but can still certainly be acceptable and pleasing to the patient.
This is very much an ‘every day’ case where it’s not always possible to provide a patient with the perfect result, and regenerate every lost papilla…but whilst we always strive for the best, we can still keep our patients happy by managing their expectations.
This case is the replacement of the Upper left lateral incisor, UL2.
The patient presented with a broken unrestorable UL2, which was subsequently atraumatically extracted.
It was left to heal for 8 weeks, at which point a tapered internal, 3.0 x 10.5 BioHorizons implant was placed. There was no need for any bone augmentation at the time of implant placement.
The implant was left to integrate and a temporary crown was then constructed to facilitate soft tissue moulding and profiling. This was left in place for 2 months.
A soft tissue impression was then taken to translate the soft tissue profile to the technician, who could then construct a definitive crown which was respectful of the soft tissue profile.
An angulated screw was used to ensure screw retention for the definitive crown to aid retrievability and eliminate the risk of cement induced peri-implant issues.
Let me know your thoughts in the comments. 👇🏽👇🏽
21/10/2022
💙 I love this quote, it really resonates with me knowing that the power for success lies within us and is not dependent on external factors.
⚡ Make the effort = achieve success! 🔥
I have another case to share with you this week. 💪🏽
This case is the placement of a 3.8 x 10.5 BioHorizons bone level implant, with simultaneous bone grafting using autogenous and Mineross allograft bone biomaterial, to replace a missing LL5.
The pre-op CBCT demonstrates a reduced ridge width, which due to the anatomy of the defect, could be predictably regenerated.
The implant was placed alongside simultaneous guided bone regeneration using autogenous scrapings harvested from the external oblique ridge, mixed with Mineross blend.
The implant was left to heal for 4 months, and on uncovering, very reassuringly, there was bone that needed to be drilled away from over the top of the cover screw.
A screw retained crown was fabricated by Ed Price, using the benefits of an angled screw for slight angled correction, and the gap restored for this very happy patient.
The BioHorizons biomaterial portfolio has a huge range of options for clinicians who choose different approaches, and can be used in a variety of cases, often with a successful outcome!
🌟 𝗖𝗮𝘀𝗲 𝗼𝗳 𝘁𝗵𝗲 𝘄𝗲𝗲𝗸
This week’s case is a full arch implant rehabilitation case.
This patient initially attended complaining of a bad taste and movement from his old full arch implant retained bridge. It had been in place for approximately 15 years, and unfortunately as can be seen by the initial CBCT, the implants had extensive bone loss and were failing.
These failing Implants were then removed and replaced with five BioHorizons tapered bone level Implants.
These implants were immediately loaded with a temporary acrylic bridge, which was left in place for three months to allow the implants to integrate.
Following this integration period, a definitive bridge was constructed, with the help of the excellent full arch technician Kevin Armstrong. 💪
This patient now has a cleansible, passive fitting, cosmetically acceptable FP3 bridge and can happily smile again. 😃
🌟 𝗖𝗮𝘀𝗲 𝗼𝗳 𝘁𝗵𝗲 𝘄𝗲𝗲𝗸
This week’s case is the placement of a 3.8 x 10.5 BioHorizons bone level implant, with simultaneous bone grafting using autogenous and mineross allograft bone biomaterial, to replace a missing LL5.
The pre op CBCT demonstrates a reduced ridge width, which due to the anatomy of the defect, could be predictably regenerated.
The implant was placed alongside simultaneous guided bone regeneration using autogenous scrapings harvested from the external oblique ridge, mixed with mineross blend.
The implant was left to heal for 4 months, and on uncovering, very reassuringly, there was bone that needed to be drilled away from over the top of the cover screw.
A screw retained crown was fabricated by Ed Price, using the benefits of an angled screw for slight angled correction, and the gap restored for this very happy patient.
The BioHorizons biomaterial portfolio has a huge range of options for clinicians who choose different approaches, and can be used in a variety of cases, often with a successful outcome !
07/10/2022
🥰 When you believe in yourself and then work hard at your goals it will always take you where you want to go!
🔥 Put your energy into one of our unique oral surgery cadaver courses, you won’t regret the upskilling it will give you!
𝗚𝗮𝗶𝗻 𝗰𝗼𝗻𝗳𝗶𝗱𝗲𝗻𝗰𝗲 𝗶𝗻 𝘂𝗻𝗱𝗲𝗿𝘁𝗮𝗸𝗶𝗻𝗴 𝗶𝗻-𝗱𝗲𝗽𝘁𝗵 𝗲𝘅𝘁𝗿𝗮𝗰𝘁𝗶𝗼𝗻𝘀 𝗶𝗻 𝗵𝗼𝘂𝘀𝗲, 𝗻𝗼 𝗺𝗼𝗿𝗲 𝗻𝗲𝗲𝗱 𝘁𝗼 𝗿𝗲𝗳𝗲𝗿 𝘁𝗵𝗲 𝗽𝗮𝘁𝗶𝗲𝗻𝘁 𝗼𝘂𝘁 𝘁𝗼 𝗮𝗻𝗼𝘁𝗵𝗲𝗿 𝗱𝗲𝗻𝘁𝗶𝘀𝘁.
Join our supportive delegates group for sharing cases and asking for information.
👉🏽 Our next six-week cadaver course starts this October with the final hands-on session in December in Coventry.
🌟 𝗗𝗠 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝗮𝗻𝗱 𝗮 𝗰𝗵𝗮𝘁!
05/10/2022
🔎 𝗖𝗮𝘀𝗲 𝗥𝗲𝘃𝗶𝗲𝘄
This is the review of a case from 4 years ago.
This elderly patient presented with missing lower left first and second molars.
She was reluctant to have any vertical augmentation and I didn’t even manage to convince her to have any soft tissue grafting!
Therefore this case was the placement of two short BioHorizons implants, 4.6 x 6mm, restored as a splinted prosthesis.
There was also very thin overlying mucosa, which the patient would not have a free gingival graft to address.
Lots of things that I would have done differently with this case now, surgically and restoratively, but it’s reassuring to see stable hard and soft tissue at the 4 year review stage.
Perhaps sometimes less is more with these types of cases in elderly patients…. Time will tell I guess!
𝗪𝗵𝗮𝘁 𝘄𝗼𝘂𝗹𝗱 𝘆𝗼𝘂 𝗱𝗼 𝗳𝗼𝗹𝗹𝗼𝘄-𝘂𝗽.
I recently posted this case of a central incisor with pathology and extensive bone loss… and asked what would you do.
👉🏽 The approach I took to treat this case, mainly based on the anatomy of the deficiency, was;
1) Atraumatic extraction and debridement of the socket.
2) Harvest of autogenous bone from the external oblique ridge and horizontal augmentation with an allograft mix to build out the alveolar ridge bucally. Probably an 80:20 mix of autogenous to allograft, with a tacked collagen membrane to stabilise the graft.
3) Left to heal for 12 weeks and CBCT scan to assess healing… so far looks promising and the bone was very ‘normal and bleeding’ when drilled into for the osteotomy prep.
30/09/2022
No one is an expert at something the first time they do it – that’s where the phrase ‘practice makes perfect’ was born! 🙌🏾🙌🏾
You have to fail, a LOT, because only when you critique your failures do you grow and ultimately get better.
Get yourself a mentor who will help you learn from your failures, and support your growth in every situation.
29/09/2022
https://m.facebook.com/story.php?story_fbid=473613268113718&id=100063951464374
🔥It's time to KICKSTART your oral surgery skills!
Dr Hamid and Dr Ali's online AND hands-on oral surgery cadaver course for GDPs offers a unique opportunity to further your knowledge in minor oral surgical procedures. 👇
This course has been established to meet the specific needs of oral surgeons not only to acquire skills, but ALSO to plan and perform standard and advanced techniques in surgical extractions, including flap raising, bone removal and suturing.
Find out more and reserve your place today: https://bit.ly/3Mg7FWh
🦷 𝗖𝗮𝘀𝗲 𝗼𝗳 𝘁𝗵𝗲 𝘄𝗲𝗲𝗸
This failing lower right first molar was unfortunately extracted, the socket debrided, and then left to heal for 10 weeks.
Following a CBCT scan and implant planning, a 4.6 x 10.5 BioHorizons tapered tissue level implant was placed. This was left for 3 months to integrate and then restored using a screw retained crown, expertly made by Ed Price.
🌟 Tissue level implants can provide excellent results in the posterior zone, especially when sufficient keratinised tissue is present. They provide the necessary strength combined with cleansibility to provide long term successful outcomes.
🌟🦷 𝗖𝗮𝘀𝗲 𝗼𝗳 𝘁𝗵𝗲 𝘄𝗲𝗲𝗸
This week’s case is of a BioHorizons tissue level implant replacing an UL4.
I had previously performed, some years ago, a lateral window sinus lift (with mineross) and placement of two tissue level BioH implants in the UL5 6 regions. These implants still have lovely bone levels around them.
Unfortunately the patient returned having broken her UL4.
We decided to extract and place this 3.8 x 10.5 BioHorizons Tissue level implant, following a delayed healing and loading protocol.
The implant was restored with a screw retained crown, utilising an angled screw, expertly made by Ed Price.
The end result was a combination of great function, beautiful engineering, lovely soft tissue and a happy patient.
Tissue level implants often produce these kind of results and that’s why they are a great part of the BioHorizons catalogue.
07/09/2022
Nelson Mandela, a man who never gave up on his beliefs, aspirations, and future.
What will your next goals and aspirations be?
𝗗𝗼𝗻’𝘁 𝗺𝗶𝘀𝘀 𝗼𝘂𝘁 𝗼𝗻 𝘆𝗼𝘂𝗿 𝗰𝗵𝗮𝗻𝗰𝗲 𝗳𝗼𝗿 𝗮 𝘀𝗽𝗮𝗰𝗲 𝗼𝗻 𝗼𝘂𝗿 𝘂𝗻𝗶𝗾𝘂𝗲 𝗢𝗿𝗮𝗹 𝗦𝘂𝗿𝗴𝗲𝗿𝘆 𝗖𝗮𝗱𝗮𝘃𝗲𝗿 𝗖𝗼𝘂𝗿𝘀𝗲 𝗳𝗼𝗿 𝗚𝗗𝗣𝗦.
👉 https://learnoralsurgery.co.uk/
🎉 𝗧𝗮𝗸𝗶𝗻𝗴 𝗮 𝗟𝗼𝗼𝗸 𝗕𝗮𝗰𝗸 🎉
This case is of a patient who presented to me, 14 years ago!
Back then I was a first year graduate and a very inexperienced general dentist!
She came in complaining of pain when biting on this tooth, so we took an x-ray and found a huge area of apical pathology.
We discussed the options of extraction VS RCT at the time, and the patient opted for RCT. We did warn the patient at the time that the apical pathology was extensive and that the bone loss that had occurred (look at the distal bone peak on the initial x-ray) meant that we could not guarantee the success of the root canal treatment.
I completed the RCT, it was one of my first molar RCTs after leaving university. Not the most perfect, it certainly could have been better, especially on the distal canal.
Not long after completing the RCT, we decided to crown the tooth. Again the crown could have been much improved, the margins could’ve certainly been better.
However, the final x-ray shown is at a recent check up appointment with the patient’s general dentist… (I no longer see this patient) notice the improvement in bone health, especially on the distal bone peak. It would have been good to have a new PA X-ray, but this bitewing coupled with the absence of symptoms for 14 years points towards a successful result! 💪🏽
As great as implants are, it is important to have a good understanding and appreciation of general dentistry. Implants are great, but other options can, in the correct clinical scenarios, also be just as good, and sometimes even better!
❔ 𝗪𝗵𝗮𝘁 𝘄𝗼𝘂𝗹𝗱 𝘆𝗼𝘂 𝗱𝗼? 🤔
This patient presented with a failing UR1, which was mobile and painful.
She has a moderate lip line, is medically fit and well, and wishes to have an implant.
The CBCT shows a large area of bone loss and extensive apical pathology.
👉🏽 What would you do to manage this case?
Let me know in the comments below! 👇🏽
29/08/2022
❌ Don’t see setbacks as failures and don’t let failures set you back! Always keep working towards your goals.
🤔 If you’re currently looking for a way to get your learning and skill expansion back on track then it’s probably time to get on a course to get moving forward again.
𝗢𝗻 𝗼𝘂𝗿 𝘂𝗻𝗶𝗾𝘂𝗲 𝗼𝗿𝗮𝗹 𝘀𝘂𝗿𝗴𝗲𝗿𝘆 𝗰𝗮𝗱𝗮𝘃𝗲𝗿 𝗰𝗼𝘂𝗿𝘀𝗲 𝘆𝗼𝘂 𝘄𝗶𝗹𝗹 𝗶𝗺𝗽𝗿𝗼𝘃𝗲 𝘆𝗼𝘂𝗿 𝘀𝗸𝗶𝗹𝗹𝘀 𝗲𝗻𝗮𝗯𝗹𝗶𝗻𝗴 𝘆𝗼𝘂 𝘁𝗼 𝗼𝗳𝗳𝗲𝗿 𝗺𝗼𝗿𝗲 𝗶𝗻-𝗱𝗲𝗽𝘁𝗵 𝘁𝗿𝗲𝗮𝘁𝗺𝗲𝗻𝘁𝘀 𝗶𝗻-𝗵𝗼𝘂𝘀𝗲.
👉🏽 Our next six week cadaver course starts this October with the final hands-on session in December in Coventry.
🌟 𝗗𝗠 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗱𝗲𝘁𝗮𝗶𝗹𝘀 𝗮𝗻𝗱 𝗮 𝗰𝗵𝗮𝘁!
🌐 www.learnoralsurgery.co.uk
🌟 𝗖𝗮𝘀𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗪𝗲𝗲𝗸 🌟
This week’s case is the replacement of a lower right first molar with a 4.6 x 9 BioHorizons Tapered Pro implant.
The LR6 was atraumatically extracted and left to heal for 3 months. Following a CBCT, the implant was planned and then placed with good primary stability.
Once integration had been completed, the crown was restored with the help of expert implant technician Ed Price.
A simple case for a lovely patient and a great result! 👍🏽
22/08/2022
🚀 It’s Motivational Monday again! 💪 How are you all doing on this lovely sunny day?
As the legend Sachin himself says “convert those stones into MILEstones.”
For every challenge you face, for every stumbling block you come across; turn them to your advantage, use them to thrive!
For many dentists, oral surgery procedures can be that stumbling block that knocks down confidence levels and can be a source of stress during the working day.
Why not look to upskill and improve? Every tough extraction will eventually be a means of improvement, especially with the correct teaching and mentoring.
🌟 𝗢𝘂𝗿 𝘂𝗻𝗶𝗾𝘂𝗲 𝗼𝗿𝗮𝗹 𝘀𝘂𝗿𝗴𝗲𝗿𝘆 𝗰𝗮𝗱𝗮𝘃𝗲𝗿 𝗰𝗼𝘂𝗿𝘀𝗲 𝗶𝘀 𝗮 𝗴𝗿𝗲𝗮𝘁 𝘄𝗮𝘆 𝘁𝗼 𝘂𝗽𝗱𝗮𝘁𝗲 𝗮𝗻𝗱 𝗿𝗲𝗳𝗿𝗲𝘀𝗵 𝘆𝗼𝘂𝗿 𝗶𝗻𝘁𝗲𝗿𝗲𝘀𝘁 𝗶𝗻 𝗱𝗲𝗻𝘁𝗶𝘀𝘁𝗿𝘆.
Learn new skills, make connections with other like-minded dentists and benefit from ongoing mentoring!
🌐 www.learnoralsurgery.co.uk for more information.
🌟 Or DM me for a quick chat!
17/08/2022
The MAG Dental Academy that Dr Mohsin Ali and myself run now has its own dedicated social media pages.
If you could please give us a follow and share this with other GDPs to help spread the word, that would be amazing. 🙏🏽
Thank You! 🥰
15/08/2022
Michael Jordan was a focused sportsman who reached the top of his game!
🌟 What will you do to reach the top of yours?
𝗗𝗼𝗻’𝘁 𝗺𝗶𝘀𝘀 𝗼𝘂𝘁 𝗼𝗻 𝘆𝗼𝘂𝗿 𝗰𝗵𝗮𝗻𝗰𝗲 𝗳𝗼𝗿 𝗮 𝘀𝗽𝗮𝗰𝗲 𝗼𝗻 𝗼𝘂𝗿 𝘂𝗻𝗶𝗾𝘂𝗲 𝗢𝗿𝗮𝗹 𝗦𝘂𝗿𝗴𝗲𝗿𝘆 𝗖𝗮𝗱𝗮𝘃𝗲𝗿 𝗖𝗼𝘂𝗿𝘀𝗲 𝗳𝗼𝗿 𝗚𝗗𝗣𝗦.
Improve your extraction, flap raising, and tissue management skills.
👉 https://learnoralsurgery.co.uk/
Videos (show all)
