MFR

Getting through orders finally..

Getting through orders finally ..

20b flat base Moffat airbox’s dropping soon!

(Price yet to be set)

MFR styled Sports catalogue Rx3 Roof Consoles coming soon!

More Fueltech Brackets are in!
Ft550/450 ft600

Brackets to suit Rx3,Rx4,Fd rx7 , rx8

Premium anodised bases are now available to purchase for our airboxes

Rx3 spoiler now mounted on! I might ad also, this isn’t even painted, it’s straight out of the mould shiny black Gelcoat 👌

Update for everyone that took part in the 10a Rx3 front spoiler presale , After a couple minor hiccups, the Template is now painted in gloss 2 pack, and now the moulding is started. Pretty stoked with the finish on it.

5 LS1 conversion big mouth VN-VP commodore airbox’s for Tuners Edge

Factory look, but decent Power upgrade from Pod filter.

New Bracket for Rx3.

Mounts to factory holes on horn mount, suits Aeroflow Radiator overflow canister.

Fun Project to be involved in with Tuners Edge Coburg. Available soon in their shop!

✅ MFR Cold air intake for rx3 “ Flat Pod “
laser cut powder coated bracket mounts to factory bolt holes. No need for drilling or cutting.

✅ Suitable for NA applications when paired with the MFR Moffat V2 airbox.

✅ As well as Turbo applications.

✅ Currently brackets for Rx3,Rx4

Working on a 323 & R100 bracket next.

🟢( Red Flex duct not supplied , however I have a retailer that sells Black ducting. )

MFR Flat Pod , In Nz , on ‘s sick 20b turbo Rx3!
Made 670Hp on pump fuel with no restriction! 💪🏻💪🏻💪🏻 much tidier install as opposed to a clunky looking restrictive Pod filter.

SPOILER ALERT!

I’ve been getting swamped with interest on these so to get the ball rolling faster I’ve decided to run a ~

RX3 10a Front spoiler Pre-Sale!

✅ As always MFR parts are Professionally manufactured to the highest standards,

✅ Will come in High gloss black Gelcoat,

✅ You can either put these straight onto your, car as is , or paint them to Color match.

✳️Currently nearing the end of the first stage where the prototype spoiler , as pictured , is now being smoothed 100% then finished off in 2k at the paint shop to achieve the highest quality possible moulding finish.

🟩Pricing is $400 ea plus post.🟩

✳️Most states in Australia will be $50
Victoria can do pickups to save postage .

If I can get enough people down I’m expecting first batch to be ready to post 3-4 weeks

Pm for more details!

Getting closer to the first Batch of 10a front spoilers.

MFR~ Making better 💪🏻

Coming Soon,

Rx3 10a Front Spoilers.

MFR.

Making better . Since 2017

v2.

Custom Airbox job i modified and manufactured for Tuners Edge Coburg.

This is a majorly upgraded VN SS airbox, that’s gone from a 3” LH side inlet to a 4” RH side inlet on the lid.

The base, has also had a tickle
And gone from a 3” to a 5” oval mouth which has also been enlarged on the engine side for greater flow.

Will all come with the factory clips that they came with from the Holden factory 👌

These will only be available via Tuners Edge website or Instore early next year.

Will come as a kit.

Tell them MFR sent you 🤝

Also im always up for a challenge and keen to develop more intakes such as these so chuck me a pm if you have something you need !

Brand new curved as OG, impregnated textured black vinyl finish.

All trays come with fixing plugs, and if nominated with seat belt mount holes either marked on the underside or drilled if you’re 100% you’re going to need them.

All Shipping $ to UK/NORWAY/USA/NZ Via quote

Postage to most states across Australia $60
Melbourne can meet up.

$480 ea

Rx3 Coupe & sedan parcel trays ,

Only a couple left, discounted to $440 ea due to bulk order falling through

When gone following batch are back up to $500 ea

Introducing the MFR FLAT POD.

Cold air intake for rx3, this mounts to factory bolt hole on drivers side of engine bay and radiator mounts. 5” mouth , this housing is made to suit a K&n filter , can be used with headlights in or remove one highbeam for extra airflow again
Mounts together with Allen key bolts incl foam rubber gasket

Will be working on brackets for other models but at the moment only have rx3 available

One black one in stock is available , white one however is a customers

Can be made in a range of colors via the high gloss gelcoat if required

This was designed to mate up to the MFR MOFFAT V2 airbox ( 5” end ) but will also work for turbo applications with silicone elbows/adaptors

Buyer to source k&n ( will supply link to ebay store)

Located in Melbourne, Aus

Mfr MOFFAT V2 airbox’s

Larger intake area than Original ✅
Laser cut Flat alloy base ✅
Foam rubber gasket ✅
Allen key bolts to lock it down✅

Colors to choose from in High gloss gelcoat~

Black/white/green/blue/grey/red/yellow/orange

I have bases to suit throttlebodies~

55mm & 48mm & Blanks


$500 plus post

MFR Fueltech Rx3 column Bracket

Suits ft550-600

$80 ea plus post

Screws to factory holes on column plastic

( not based in Phillipines, Melbourne Aus )

MFR Moffat V2 airbox.
Available on order.
3mm flat alloy base. ✅

1 1/2 inches deeper intake mouth than orig ✅

fixing down via Allen key bolts. ✅

Sealed off with fuel resistant gasket ✅

Comes in standard black gelcoat, but can do
special order colors on request.

The finish you see here in pics is straight out of the mould, no sanding no paint.

OG

New product coming …..

Introducing , the MFR Moffat v2 airbox.

We have done away with the fibreglass base, airbox now bolts down onto a laser cut 3mm alloy base, with Allen key dome head bolts.

Airtight seal is an impregnated Fuel resistant Silicone rim around the base of airbox.

By removing the old style base, we were able to open up the mouth area where the base hits the 5” pipe, greatly improving airflow.

Comes in standard black Gelcoat, 3 Allen key bolts, alloy base ( blank , due to various different carbs/injection setups , angle placement of airbox. )

This has been setup to bolt an efi hardware pro series 55mm tapered injection setup, which will require 2 10mm efi hardware billet spacers to raise the airbox over the fuel rails.

Depending on what setup you have you may need the same size spacer, or larger if you are going over a weber fuel bowl.

Pricing is-

$500 for complete kit incl base, bolts ,(minus spacers )

Postage anywhere in aus $20

Pre orders are open ,

Eta~ mid-end jan delivery