rohsa_08

*Toolbox talk_Topic on Driving in Reverse _CW-036 August,28-2023*

*Introduction & Importance*
Driving in reverse causes more incidents and injuries than driving in all of the forward gears combined. When driving in reverse your visibility
is limited.
Be alert when backing up your vehicle.

*Consequences*
Driving in reverse can cause serious incidents if it’s not done correctly.
Consequences often include getting crushed and/or death.

*Procedure/Practice*
When backing up there are several things you can do to reduce the risk of an incident:
• Ensure your vehicle is equipped with a back-up alarm.
• As you approach an area where you need to back up, examine it closely – look for possible hazards.
• If possible, use a spotter to guide you when backing up.
• Stay clear of other vehicles, machinery, and pedestrians.
• Pick out landmarks that you will be able to see in your mirror.
• If you become disoriented or unsure as to where you are or what is behind you, STOP. Orient yourself. Pull forward and circle around, if possible.

*Application or Follow Up*
Follow up with the Traffic Control People Poster.

*Rights & Responsibilities*
You are responsible for your own safety and the safety of others when vehicles and machinery are backing-up.

*Summary*
When operating a vehicle in reverse, pay close attention to your surroundings. Be extra careful to get help from others if you can’t see behind you.

first

*Toolbox talk_Topic on Biohazards infection materials _CW-034 August,13-2023*

*Introduction and Importance*

Biohazardous infectious material contains organisms that can cause diseases such as HIV/AIDS, Hepatitis B and Salmonella in humans or animals.
These materials are usually found in hospital and laboratory.
However, you could find them at work. Universal Precautions are guidelines to help protect you from exposure to infectious diseases spread by blood or body "uids.

*Consequences*
Biohazardous infectious materials can cause AIDS, hepatitis or other diseases.

*Procedure/Practice*
If your work requires you to handle biohazardous infectious materials, ask your supervisor for training so you understand the hazards, roles,

*responsibilities and regulations you are to follow.*
Wear the proper PPE as every tissue or "uid is to be considered dangerous.
Make sure you have a tetanus immunization every 10 years.
Trash bins in the Health & Safety department may contain infectious materials.
Be careful in this area.

*Application or Follow Up*
Follow up with a WHMIS poster.
Discuss whether or not there are Class D Biohazardous Infectious Materials in the worksite.

*Accountability & Responsibility*
Your employer is responsible for providing you with the necessary training to work with biohazardous materials.
You need to exercise caution and follow MSDS instructions when handling these materials.

*Summary*
Even though Biohazardous Infectious Material is usually found only in health care facilities, it is important to be aware of what to do to make yourself safe.
Wear the proper PPE and know your role and responsibilities.

*Toolbox talk_Topic on Emergency Response toolbox talk_CW-033 August,07-2023*

*Introduction & Importance*
Emergencies differ in scale and urgency.
Regardless of the emergency,
You need to be familiar with your company's emergency /,

*response procedures.*
Timely response to an emergency can make the difference between life and death.

*Consequences*
Not following your company's emergency response procedures may lead to:
• Inability to respond to an emergency Injuries
• Legal consequences
• Loss of employment
• Long-term disability or death

*Procedure/Practice*
Notify your immediate supervisor of an emergency situation.
Know your company's emergency response procedures and the worksite muster point.
Follow instructions of emergency response personnel.
Do not intervene unless you are certified in emergency response.
Allow emergency personnel to do their job.

*Accountability & Responsibility*
We are responsible for knowing our company's emergency procedures.
Your employer is responsible for providing you with a safety orientation
which includes emergency protocol.

*Summary*
During an emergency situation follow your company's emergency process.
Every worksite has different emergency response procedures,

*Toolbox talk_Topic on Equipment Guards toolbox talk_CW-032 July,31-2023*

*Introduction & Importance*

Equipment guards are components of tools or machinery that help to prevent your clothes and body from coming into contact with any dangerous or moving parts.

A proper guard prevents injuries and slip-ups from becoming more serious.

Always make sure the guard is in good working order.
If not, the equipment should be tagged out of service and repaired or replaced.

*Consequences*
Not using guards or using damaged guards may result in:
•Body limbs or objects being drawn in to the cut point.
• Objects may be sent flying at high speeds causing injury.
• Loss of vision.
• Lost time from work due to injury.

*Procedure/Practice*
Use the machine only for jobs that it is designed for.
Do not use guards with rough edges or sharp corners.
Ensure the guard is in good working order prior to operation of equipment.
Use your company's maintenance procedures to maintain your equipment and their guards.
Do not fix or adjust the equipment guard without powering down the machine.
Replace damaged or ineffective guards.

*Application or Follow Up*
Follow up with the Locking Out poster.

*Rights & Responsibilities*
You are responsible for making sure your equipment has well-functioning guards.

*Summary*
Amachine guard should be easy to operate with minimal effort. The guard should be suitable for the job and the machine.
If a guard is not functioning properly have it repaired.
Guards do not protect you from all injuries; always wear the proper PPE's when operating machinery.

*Toolbox talk_Topic on Accident Prevention toolbox talk_CW-031 July,24-2023*

*Why run an Accident Prevention Toolbox Talk?*

-It’s too late to plan for prevention once an accident has occurred
-People cause accidents; not equipment or other hazards such as chemicals,
-The personal costs of accidents to you or others.

*Causes of Accidents in The Workplace*
-People who are under the influence of alcohol and drugs,
-not following instructions,
-not following the training that they have been given,
-doing tasks that they are not trained to do,
-Unsafe manual handling, loading, stacking, and storing
-Overloading of workplaces, scaffolding, hoists etc.
-Use of faulty equipment
-Incorrect handling or transportation of chemicals
-Failure to use personal protective equipment PPE
-Ignoring safety signs, signals, and warning signs
-Illegal removing of guards and barriers from machinery and tools
-Directing compressed air at yourself and others
-Workplace complacency
-Keep your work area clear – don’t leave tools, equipment and debris laying around.

*What is Your Employer’s Responsibility to prevent Accident at Workplace?*
-Not remove guards or barriers,
-Don’t be under the influence of drugs and alcohol,
-Use your PPE and wear it correctly,
-Not use faulty equipment,
-Don’t get complacent,
-Not overload scaffolding, workplaces, storage, hoists etc.
-Manual handling should be done correctly and safely,
-Don’t direct compressed air at yourself or others,
-Do not do any tasks that you’re not trained to do,
-Do not handle and transport chemicals if you’re not trained to handle them,

*Personal Costs of Accidents to You or Others*
-Unable to do your job and your hobbies
-Reduced personal satisfaction, life balance
Loss of earnings – leading to potential financial struggles
-Extra expenses due to permanent disability

*Toolbox talk_Topic on power lines _CW-029 Jul,10-2023*

*introduction & Importance*
Using proper safety procedures near power lines is absolutely critical. Injuries and death can result when working too close to power lines. Avoid contact with power lines.

*Consequences*
Contact with power lines results in serious burns, injury and death.
Avoid power lines whenever possible.

*Procedure/Practice*
Make JSA before starting a task.
Keep a safe working distance between your equipment and power lines.
Before operating any equipment, make a safety plan that prevents contact with power lines.
Take extra care and precautions.
Remember, electricity is invisible.If needed, notify the power company to disconnect or relocate the line.
Use a trained signaller when using machinery around power lines.
If you come in contact with a power line while you are in a vehicle,Crane, machine,..:
• Stay in your vehicle until help arrives.
• Break contact with the line, if possible, by moving vehicle at least 10 meters away.
• Contact the power company, or have someone else contat them to turn of the power. Remember that wind and temperature may affect the power line’s height. Never ride or climb on equipment or load equipment near power lines. Ensure the site-specific workplace violence assessment is complete Ensure all workers understand the GAZZ Card contents, and sign off in acknowledgement Locate Utilities – Call “Ontario One Call” for locate services (when necessary) Locate overhead hazards, if it is suspected that they will be encountered and ensure adequate signage

*Application or Follow Up*
Follow up with the Emergency Response poster.

*Rights & Responsibilities*
Occupational Health and Safety Legislation requires that you stay clear of power lines.

*Summary*
If you work from a scaffold or operate a crane, you must look out for sources of overhead power supply. If you are unsure of the voltage or safety procedures when working with power lines, ask the power company or your supervisor.

REG_https://www.reg.rw/index.php?id=2
Contact:2727
REG | EUCL | EDCL on
+250 788 310 606

*Toolbox talk_Topic on Transportation of Goods_CW-026 Jun,19-2023*

*Introduction & Importance*

Every material handling operation is di! erent. Every sector of the construction industry uses safety practices when handling and transporting goods and materials.

*Consequences*
If materials are not transported correctly they might spill, block visibility of the driver, and create unsafe working conditions for workers.
Chemical spills are toxic and damage the environment.

*Procedure/Practice*
Make sure that the pallets that you are using are in good condition.
Make sure that you have the proper equipment to load and unload your goods (forklift, dolly, cart or hoist).
Tie and secure any unstable loads.
Repack them if needed.
Make sure your load is balanced evenly.
Make sure that your load does not exceed your vehicle’s load capacity.
Observe the speed limit when driving.

*Application or Follow Up*
Follow up with the Track Control Person poster.(refer logistics information).
Follow RURA requirements for transportation goods services.
Lead well instructions displayed on labels

*Rights & Responsibilities*
Your employer is responsible for providing you with the right equipment to transport your load.

Rura Link-trasnportation guidelines
https://rura.rw/index.php?id=81

*Toolbox talk_Topic on Trenching and Excavating_CW-025 Jun,12-2023*

*Introduction & Importance*

All incidents and deaths related to trenching and excavating are preventable.
Before you start trenching or excavating make sure you know what type of soil you are working with.

1. Hard and Compact Soil: Soil that may be excavated by machinery and shows no sign of cracks after excavation.

2. Likely to Crack or Crumble Soil: Soil with low to medium moisture content that shows signs of cracking after excavation.

3. Soft and Sandy or Loose Soil: Soil that will run or shift if unsupported.
When digging trenches or excavating, seek the help of professionals.
They will know the safest way to proceed.

*Consequences:*
Entering an unsafe trench or excavation can cause suffering to you, your family and friends.
Some effects of being trapped in a trench include:
• Internal Injuries
• Lifelong disabilities
• Financial losses
• Possible death due to suffiocation (e.g., soil weight)

*Procedure/Practice:*
When trenching or excavating the smallest incident can cause incredible destruction.

You can prevent disasters by following these steps:
• Plan your work:
- Assess the hazards of the worksite.
- Install adequate safeguards to support the soil.
- Use the proper shoring materials.
- Use the right equipment to carry out the job.
- Call before you dig:
- Call your local utility company to identify underground utility lines on your
worksite.
• Excavating near utility lines:
- Do not use mechanical tools when excavating within 1 meter of a utility line.
- Keep a constant eye on the condition of the trench and the equipment you are using to monitor the soil’s conditions.
- use PTW system
- use safety signage
- provide safe access by ladder,..

*Application or Follow Up:*
Follow up with Dial Before You Dig poster.

*Accountability & Responsibility:*
Both excavators and owners of buried facilities are responsible for preventing damage to underground utility lines.
Follow the appropriate legislation to guide your sloping and shoring procedures.

*Toolbox talk_Topic on Slips and trips_CW-024 Jun,05-2023*

*Introduction & Importance*

Slips and trips are among the most frequent lost-time incidents in construction. 60% of falls are caused by a slip or a trip on a flat surface.
Slips and trips are caused by garbage and clutter on the floor or stairs and poor footwear.
Preventing slips and trips should be a primary safety objective in all of your daily routines.
Good safety habits, routines and hazard assessments can prevent most incidents.

*Consequences*
Slips and trips may cause injuries, loss of income, inability to exercise and play sports, and lifelong pain and discomfort.

*Procedure/Practice*
Make sure your worksite is properly lit.
Make sure you use handrails and guardrails.
Replace or repair any that are broken.
Always keep at least one hand free to grip railings.
Do not take part in any onsite “horseplay”.
Don’t run in walkways or on stairs.
Keep grease and oil off all work areas.
Maintain good general housekeeping at all times.
Barricade floor openings and chutes. Put up warning signs.

*Application or Follow Up*
Follow up with the Fall Protection poster.

*Rights & Responsibilities*
Both you and your employer are responsible for maintaining good housekeeping practices to prevent slips and trips.

*Summary*
Most slips can be prevented by making safety a part of your everyday routine.
Assess your risks on a regular basis and maintain an orderly working environment to prevent injuries.

*Toolbox talk_Topic on Swing Stages_CW-022 May,22-2023*

*Introduction & Importance*

Using swing stages requires your best effort and your full attention to safety details. Make sure you understand your company’s safety
procedures when working on a swing stage.

*Consequences*
Unsafe work practices on a swing stage may lead to incidents if it’s not done correctly.
Consequences may include:
• Slips and falls
• Lost income
• Crushing of limbs
• Death
• Injury to other workers and pedestrians

*Procedure/Practice*
When working on a swing stage make sure:
• Your lanyard is fastened to your life line before getting on swing stage.
• The stage platform is constructed properly and all materials are in good condition.
• The points of support are in good structural condition.
• The ropes, cables and harness are in good condition.
• You don’t overload your swing stage.
• You only operate the swing stage with the number of workers it is designed for.

*Application or Follow Up*
Follow up with a Personal Protective Equipment Poster.

*Accountability & Responsibility*
You are responsible for taking the necessary steps to ensure you have the proper training and safety gear to work on a swing stage.

*Summary*
Your life depends on proper use and maintenance of swing stage equipment and accessories.
Follow your company’s and the manufacturer’s procedures and practices.

*Toolbox talk_Topic on Grinders_CW021 May,15-2023*
*Introduction & Importance*

Safety procedures need to be followed when using grinders and grinder wheels.
Proper maintenance and operation of grinder(s) in your work area will contribute to a safer worksite. Regular inspection of grinders and grinder
wheels reduces the likelihood of injury and allows you to work more e! ciently.

*Consequences*
Faulty grinders and grinder wheels may lead to:
• Injury by getting your hand or clothing caught in the grinder.
• Broken grinder wheels. This may send pieces "ying at great speeds causing injury.
• Sparks from a grinder wheel. This may cause a fire or explosion when used too close to "ammable materials.
• Lost time from work preventing you from completing your job.

*Procedure/Practice*
Clean and repair your grinder regularly.
Make sure you wear the proper safety gear such as eye protection, aprons, gloves, proper footwear, and respiratory protection if required.
Use the right grinder wheel for the right job – do not grind wood, plastics or non-iron metals on ordinary wheels.
Allow grinder to warm up for one minute before use.
Stand away from the wheel when you start the grinder.
Set up protective barriers to contain sparks.
NEVER disengage/remove the grinder guard, even if it allows you to work faster.
Ensure the wheel speed does not exceed the maximum speed of the grinder.
Avoid contact with oil or moisture.
Do not store grinder wheels near heat.

*Application or Follow Up*
Follow up with a poster from the PPE category.

*Accountability & Responsibility*
You are responsible for following all safety procedures when operating a grinder.
Your employer is responsible for providing you with the training on how to operate a grinder.

*Summary*
Always conduct a safety assessment before working with your grinder. A consistent safety routine and right attitude will help you avoid injury no matter
how big or small your job is.
Remember, it only takes a fraction of a second for
injury to occur if you are not paying attention.

*Toolbox talk_Topic on working at height_CW020 May,08-2023* This week ;*

Introduction & Importance
Falling is one of the most common causes of death in construction. can be seriously injured or killed even if do not fall far.

Consequences
Falls can lead to serious injuries such as sprains, bruises, broken bones,
dislocations and bruises, paralysis and death.
Falls can lead to lost time from work and lost income.
Injuries such as broken bones take a long time to heal and they may cause pain for a lifetime.

Procedure/Practice
Always wear the correct fall arrest equipment. Inspect it daily and adjust it properly.
When you are working above 1.8 meters, follow your company’s speci! Fall Protection Plan.
A Fall Protection Plan includes emergency response procedures and fall arrest equipment.

Application or Follow Up
Give some examples of jobsite activities that require fall arrest equipment.

Rights & Responsibilities
You are responsible for making sure that you are safe when working at heights.
Your employer is responsible for providing you with a protection plan when working at heights.

Summary
Never work at heights without the proper fall protection equipment and training.
Fall Protection

*Toolbox talk_Topic on Complessed gas_CW019 May,1-2023* This week ;*

*Introduction & Importance*

Compressed gas is a gas which is placed under pressure or chilled and contained in a cylinder.

All compressed gases are hazardous due to the
high pressure in the cylinders.
Most commonly used compressed gasses are
propane, *oxygen*, nitrogen and helium.

*Consequences*
Compressed gases are dangerous. They are under pressure and can “rocket” at high speeds if the cylinder is broken.
Inhalation, eye or skin contact may lead to health problems such as brain damage and vital organ malfunction.
Burn-like injury can take place when the tissue around the eye or on the skin freezes.
Cylinders may expand and explode if heated.
Frostbite will happen if the cylinder is leaking and the compressed gas touches your skin (e.g., carbon dioxide or propane).

*Procedure/Practice*
MSDS explains how to safely store the materials and what to do in case of an accident.
Store compressed gas cylinders in cool, dry and ventilated areas.
Leave the cylinder valve protection cap in place – close all valves when cylinders are not being used.
Make sure the supplier labels are properly filled in and not damaged.
Use the proper equipment and containers when moving and dispensing
compressed gas cylinders.
Handle “empty” cylinders carefully.
Keep vented containers in an upright position and NEVER roll, drag or drop cylinders or allow them to strike each other.

*Application or Follow Up*
Follow up with a WHMIS poster.
Discuss which worksite materials are Class A Compressed Gas.

*Accountability & Responsibility*
Your employer is responsible for ensuring you have necessary training to work with compressed gas. You need to exercise caution and follow MSDS
instructions when handling compressed gas.

*Summary*
Compressed gases can burn or explode under certain conditions.
Proper use and storage must be followed at all times.
Consult the MSDS or your supervisor for proper use of compressed gases.

*Toolbox talk_Topic on construction fire🏗️ 🔥🚒_CW018 April,24-2023* This week ;*

*Introduction & Importance*

There are fire hazards at all worksites. Always be prepared in case of a fire.

Proper preparation will prevent unnecessary injury.
There are three types of fires:
• Class A Fires: Fires that occur in combustible materials.
• Class B Fires: Fires that involve "ammable liquids.
• Class C Fires: Fires that occur in electrical equipment.

*Consequences*

Not being prepared for a fire and/or not having proper emergency
procedures could have serious consequences. You could lose work
and income if you are injured and have severe burns and scarring, gas
poisoning and respiratory illness. You could die.

*Procedure/Practice*
Know your company’s emergency procedures.
Know where the !re exits are and keep them clear of obstructions.
Ensure all doors are free of obstructions and are easy to open.
Keep !re doors closed.
Smoke in designated areas only.
Take part in !re drills and emergency exercises.
Handle and store combustible materials, "ammable liquids, and electrical
equipment according to safe storage procedures.
Know where the !re! ghting equipment is stored and how to use it.

*Application or Follow Up*
Review your company’s emergency response procedures.

*Rights & Responsibilities*
Your employer is responsible for developing a fire evacuation procedure.
You are responsible for understanding your roles and responsibilities in case of a fire.

*Toolbox talk_Topic on the effect of alcohol_CW017 April,17-2023* This week ;*

This information briefly summarizes some of the effects of a person that is hung over. Direct effects of alcohol vary with the individuals. In general, a person will excrete approximately one alcohol drink per hour. Consider the following:

An employee is out until 1:00 a.m. and has consumed 12 or more beers. They show up to work at 7:00 a.m. This employee is likely to have at least six alcohol drinks in his system at the time of starting the work. At this rate, the employee will start work intoxicated and eventually drift into a hangover and will probably be working in a very dangerous state during most of the workday.

*ISSUES OF A HANGOVER*
The following are some points to consider:

• A person with a hangover may have lower levels of alcohol in their system and may be “legally sober”.

• Any levels of alcohol in the system can affect the central nervous system, which will affect

*JUDGMENT and MOTOR SKILLS.*

(Judgment and Motor Skills are critical components of working safely on a construction site.)

*HANGOVER EFFECTS*

A- Employees that are hung over are impaired from low sugar levels, dehydration and may still be legally intoxicated.

• Symptoms / Effects:
• Impaired judgment
• Decreased motor skills
• Potential for dizzy spells, etc.

B – Employees no longer under the influence of alcohol but still feeling hung over still have an effect:

• Symptoms / Effects:
• Impaired judgment
• Decreased motor skills
• Dizziness
• Increased potential to lose consciousness

*Toolbox talk_Topic_CW 09_feb,26-2023*

*Introduction and Importance*

Unfortunately accidents on the jobsite do happen. When someone is injured on the job site you need to know what to do.
Your company has an identi!ed individual that will help you report the accident and fill out the
needed paperwork.
All accidents must be reported in a timely manner.

*Consequences*
Not reporting an accident may lead to:
• Fines, citations or legal action.
• Violation of Provincial Occupational Health and Safety Legislation.
• Shut down of your company’s operations.
• Possible prosecution and prison time.

*Procedure/Practice*
No accident is too small to report. In the event of an accident follow these
steps:
• Follow your company’s accident reporting procedures.
• Contact your supervisor and report that an accident has occurred.
• Work with your supervisor to !ll out the needed paperwork.

*Application or Follow Up*
Follow up with the Incident and Near Miss poster.

*Accountability & Responsibility*
Both you and your employer have a legal obligation to report an accident as soon as it happens.

*Summary*
Reporting accidents allows you and your employer to have a safe working environment and prevents similar accidents from happening in the future.
Learn from previous accidents and incorporate the lessons learned into future hazard assessment routines.

*Toolbox talk_Topic-HOUSEKEEPING_CW011

Introduction & Importance:

Keep your work site clean for the health and safety of yourself and your co-workers.
A clean work site prevents injuries and saves time and money.
Good housekeeping is a basic part of fire and accident prevention.
Good housekeeping reduces slipping, tripping and other more serious accidents.
Poor housekeeping wastes time and it is the number one cause of accidents on construction sites.

*Consequences*

Poor housekeeping can lead to fire, electric shock, health hazards, injuries and death.

*Some examples of poor housekeeping are:*

• Damaged tools which are dangerous and can cause injury.
• Sharp objects, wires, and scrap metal lying around which can cause tripping or injury.
• Wet, greasy or dirty surfaces which can cause slipping.
• Falling or poorly stacked objects which can fall on someone.
• Blocked emergency exits and hard to locate f!re extinguishers.
• Worksite garbage which may attract rodents or insects. These can bring diseases and other health problems.

*Procedure/Practice*

Good housekeeping means putting tools, messes and garbage away.
Remember:
• Clean as you go, not just at the end of a shift.
• Clean up dangerous situations like oil or water spills, sharp objects and grease immediately.
• Put everything back in its place and into its proper container.
• Remind your coworkers to practice good housekeeping.

*Rights & Responsibilities*

It is every employee’s right to work in a clean, safe and healthy environment.
It is every employee’s responsibility to keep the workplace clean and free of obstructions and hazards.

*Toolbox talk_Topic_CW010 Mars,06-2023*

Introduction & Importance

Sca!olding must be designed and constructed correctly. It is essential to your safety and the safety of others. Properly built sca!olding can reduce many on the job safety hazards and accidents. Build your sca!olding according to specifications.

*Consequences*

Poorly constructed sca!olding may cause the structure to collapse.
You would be lucky to escape with only minor injuries.
You could risk broken bones or death.

*Procedure/Practice*

Before you start make sure:
• Inspect the tag before use it,
• The sca!olding is on level ground.
• The ground can support the weight of the scafolding and its load.
• The scafolding is built on good quality sills with base plates in place.
• There are no power lines, obstacles or equipment nearby.
• All your materials are in good condition and secure.
While working make sure to:
• Climb and walk carefully.
• Use ladders or stair units to climb the scafold.
• Use accessories such as access ladder, rails and swing gates as intended.
• Not overload the platform or hang weight outside platform.
• Climb "rst, and then use a line to hoist tools and materials up.
• Install toe boards to prevent objects from falling.
• Keep railings, ladders and walkways free of litter, grease, oil and mud to prevent slips and other accidents.

*Application or Follow Up*

Follow up with the Ladder Safety, Roo"ng, or Working at Heights poster.

*Rights & Responsibilities*

Scafolding should be inspected by you, your employer or a designated professional.
Scafolding must be rigid, stable, and built according to legislation.

*Toolbox talk_Topic on Defected tools_CW012 Mars,19-2023* This week ;*

*Introduction and Importance*

It is important to work with tools that are in good working condition,
working with damaged or excessively worn out tools may lead to serious incidents.
Regular inspection of your tools reduces the likelihood of injury and allows you to work more eficiently.

*Consequences*

Not inspecting tools may lead to:
• You not being able to do your job.
• Tools not performing as they were intended to.
• Lost time from work.
• Serious injury resulting from detachment of tool parts.
• Possible electrocution and "res from damaged power tools.

*Procedure/Practice*
ensure that the cutting edge or blade is well covered,
Make sure your tools and equipment are in good condition.
Do not use tool if chipped, cracked or fractured.
Ensure that cutting edges are kept sharp to ensure smooth cutting.
Make sure that electrical cords are not exposed or damaged.
Ensure the tool is dry and stored in a safe place.

*Application or Follow Up*
Follow up with Reporting Near Misses and Incidents poster.

*Accountability & Responsibility*

You are responsible for making sure that your tools are in good working condition.

*Summary*

Tools are an essential part of your job. Frequent maintenance and inspection of tools allows you to work more efectively and allows you to keep your tools for a longer amount of time. Remember, inspecting your
tools is a large part of keeping you safe on the worksite.