ADHD Vs Airsoft

Getting that angle just right

This is the keeper… This is a mostly Avalon build. It’s the vfc mosfet bearings and shell with lonex and Shs compression components and Shs 12:1 gears and a high torque motor by shs. I can get 23 rps and some really snappy trigger response on a 7.4v. And yes I have a black tip for it.

Here is what is “essentially” an Avalon with a speed motor by Shs. I get 18-20 rps with the right 7.4v battery. Soooo… Vfc made a Barret rec 7 with full trademarks. This one has two matching uppers with the Barret logo and each has a socom Daniel Defense rail with full trademarks. I have the 14” as seen in the video I posted below and an 8” barrel. I just threw some tight bores in these and have yet to field it. It’s one of my favorite Airsoft replicas.

8 hrs later... threw some Latin on the back for giggles.

Ender 3 Pro
40 percent infill,
70 degree bed temp,
240 nozzle temp,

Progressive iterations of lens protectors for Airsoft. Original design on thingiverse.

I have had me of these cytac holsters just kicking around for a long time with the belt paddle on it. This adapter is awesome. I feel like with the right plastic if u just had the geared portion and the clips it would be stronger with a solid piece but this is excellent for what it is.

Apologies... it’s been awhile. How about some chips... sector delay chips...

Printed on Ender 3 pro
100 percent infill
60 deg Bed
200 degrees nozzle

Built this for a guy. A vfc Avalon that only took me 4 hrs. Filled with all kinds of goodies filled. That gate titan and max trigger is killer. It was one of the smoothest builds interns of installing parts I have ever had the pleasure to work on. Regardless of any opinions good or bad on the titans the drop in capability is really nice.

Make your own HPA Line... just need to figure out what the protective plasit mesh is called and add some shrink tubing....

Here u go... with the combo of the slip fitting and the 1/8" qd fitting with the 1/4 ni**le and some nylon tubing... hey presto your own HPA line

https://www.ebay.com/itm/Foster-2-Series-1-8-Body-Air-Hose-Fitting-Coupler-Plug-22-2-2202-2302-23-2/264839202821?hash=item3da9a58805:g:wfQAAOSwejpfP1Vd

Okay can we Hack HPA... I would do a thread and tap conversion in a heart beat. Much better than the CQB russian. I could see making the connectors custom out of steel what fitted to the thread of most gun mags would be a problem. Maybe the steel would chew through the potmetal of most magazines, the weight, or maybe just money. Those aluminium jobs are 15 each... If I threaded an tapped all my mags with this... I would not be worried abbout it breaking off I can tell you.

I also am pretty sure that HPA uses what is essentially 6mm line or 1/4" tubing, nylon, but its rated for 240psi or more. I have found slip fittings as well... I am now very very curious as to how I can take advantage of this.

I am sure already others have made their own lines.

https://www.ebay.com/itm/FOSTER-22-2-1-8-MALE-NPT-X-1-8-INDUSTRIAL-PLUG-STEEL-NIPPLE-AIRSOFT-FITTING/262145043596

Evike price: $6.50$
https://www.evike.com/products/52217/

NOW CHECK THIS STUFF OUT!

$$11.75$$ FOR 10
https://www.ebay.com/itm/Qty-10-1-4-OD-Tube-X-1-8-NPT-Pneumatic-Fitting-Push-To-Connect-Air-Fitting/274013702178?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Da8ab33b7e7a24e79b3b6145a7ce29cac%26pid%3D101195%26rk%3D2%26rkt%3D12%26mehot%3Dag%26sd%3D273959409335%26itm%3D274013702178%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b&_trksid=p2047675.c101195.m1851
https://www.ebay.com/itm/Qty-10-1-4-OD-Tube-X-1-8-NPT-Pneumatic-Fitting-Push-To-Connect-Air-Fitting/274013702178?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Da8ab33b7e7a24e79b3b6145a7ce29cac%26pid%3D101195%26rk%3D2%26rkt%3D12%26mehot%3Dag%26sd%3D273959409335%26itm%3D274013702178%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b&_trksid=p2047675.c101195.m1851https://www.ebay.com/itm/Qty-10-1-4-OD-Tube-X-1-8-NPT-Pneumatic-Fitting-Push-To-Connect-Air-Fitting/274013702178?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Da8ab33b7e7a24e79b3b6145a7ce29cac%26pid%3D101195%26rk%3D2%26rkt%3D12%26mehot%3Dag%26sd%3D273959409335%26itm%3D274013702178%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b&_trksid=p2047675.c101195.m1851
https://www.ebay.com/itm/Qty-10-1-4-OD-Tube-X-1-8-NPT-Pneumatic-Fitting-Push-To-Connect-Air-Fitting/274013702178?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Da8ab33b7e7a24e79b3b6145a7ce29cac%26pid%3D101195%26rk%3D2%26rkt%3D12%26mehot%3Dag%26sd%3D273959409335%26itm%3D274013702178%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b&_trksid=p2047675.c101195.m1851

(Qty 10) 1/4" OD Tube X 1/8" NPT Pneumatic Fitting, Push To Connect Air Fitting | eBay 1/4" OD Tube X 1/8" NPT Pneumatic Straight Fitting. NPT Thread Sizing Info. 1/8 NPT 0.405 Roughly 3/8". 1/4 NPT 0.540 Roughly 1/2. 3/8 NPT 0.675 Roughly 5/8".

Found this. Would you make your own HPA Line? https://www.amazon.com/Tailonz-Pneumatic-Nylon-32-8ft-Tubing/dp/B07P56RNXK/ref=sr_1_3?dchild=1&keywords=6mm+pneumatic+tubing+240psi&qid=1612496608&sr=8-3

Well I had 2 guns shatter the front of the Gearbox in the cold... Thanks weather.

Further pics on my take on the Ares AS-01 Striker. have been procrastinating on doing the lancer video and been getting this thing ready for the weekend.

Well there is another day of teching on my break before school starts. It shoots 6mm plastic pellets. I made the barrel. there will be an orange tip on it no body freak out.

Got a hold of any ICS that was missing it’s mosfet/microswitch trigger unit... gate titan wouldn’t work so I improvised.

My super quiet redline N7 milsim lives! Potentially...

Here are some pics from the Valken build

Went to get here Cronographed and the tech was more disgusted by the Valken DSG than the Lancer! It does have a VFC gearbox in it with shs components and it feeds great on a BAMF mag (only because I modified the body!)

I found my new sleeper gun build I guess.

SUP. I have caught COVID! I though I would have more time to relax and do some airsoft stuff and I was horribly wrong. I have felt crummy as all get out. That has changed a bit and I am now feeling better, but still not out of the woods. I have a crap tone of parts left over from the lots I have bought and I am have some goals associated with them that I wanted to run past y'all!

My ultimate Goal with this page is to showcase some of the nutty ideas I have in regard to airsoft and to get feedback from people because I got so many ideas in my brain it can be hard to choose which one.
I know that part of that involves me wanting to get a 3D printer. I feel like some of my creativity would be better wit something that I can fabricate myself. I have a couple projects that are done and some that I want to get done but I still have ADHD + covid brain and I wanted to bounce some ideas off y'all. Which do you think would be the most profitable/easiest to sell and get some $$$ for the 3D printer.

If I can trade or sell enough to get that then I think pretty much most of my guns would be available to sell for a 3D printer.

1 What to do about all these freaking stock gearbox shells?

I have 10 plus intact GB shells 3 of which are Javelin EBB shells. I have a V3, an MP5 and a bunch fo V2s (8mm, 7mm, and 6mm). I had though about throwing some stock components in them and then flipping them as replacement gear boxes pre teflon taped and with some other compression mods and properly shimmed. I do have some up grade components and I am at a loss as to what to do. Keep them as replacements for folk in need or build the things?

2. ICS CXP resurrection? Or replacement?

So Ihave an old ICS cxp. Its missing the tang on the upper receiver to lock the upper into the lower. (I can't find a replacement upper anywhere).BUT when the Upper GB is in it locks down perfectly, I am thinking of making it my Electric back up because its so easy to work on but I need some $$$ before I can either sell or keep it.
It is already set up for a gate inline mosfet with 13:1 gear and an oring air nozzle. I am thinking about keeping it at m4 length but I could put a 300mm in it if I wanted to. It needs a High torque motor, but I don't have 40 to 70 for something that will make the 13:1s.

I could also set it up for DSG as I have 2 sets of shs DSGs.

I really like the lancer tactical two tone I have made but, for ease of access the ICS split GB is what I would prefer to go with down the road.

I am thinking of either an SHS high torque, a Element High torque 22 tpa, or an ASG infinite 22000 or 18000 high torque.

3. Black Ops M4 body with Javelin Gearbox or DSG KA GB reinforced.

The last major project is this m4 black ops body. I have a couple different ways I can go with this puppy. Try to rebuild it stock and sell it for $100. It uses the Javelin EBB system... very questionable reliability (I have two of the javelins with broken front end and one that I stepped on and it snapped in half.) the ebb is cool but i would not upgrade any portion of it. It is super sketch.

Or SUPER TASH GUN

I have a KA reinforced GB shell that is set up for a gate in line mosfet. I have 2 sets of SHS 8 tooth DSG gears and a 150mm (possible krytac) short inner barrel with a great crown on it and sugru hop up mod in it. It could be a nice AR pistol. But it would require an upgraded motor to handle the DSG. I would keep it at a lower FPS I think 300 to 330.
The other reason why I am leaning toward this is I have a barrel that I made from a steel pipe and a solid block of Copper that I lathed up as the barrel lug and it works really well. I want to put it in a gun and see how it performs. I just need a better motor.

4. VFC Stock gearbox or upgrade?

This one has a misfit in it. Just a generic shell but I was thinking about putting some reinforced gears in it and compression mods and leave it.

5 Customized GB for redline N7 milsim.

My Redline N7 milsim has a dropping HPA engine in it with a G&G top tech body. I have a crap ton of shells and the one in the gun in reinforced and Dummy thiccc. It doesn't need to be. I was contemplating putting a old stock GB in it and dremeling the back half off to make it easier to remove my air stock for maintanence by removing some material from the rear where the spring guide is to be able to get my allen key set in there to tighten it fully or re tighten it without removing the GB (which is a pain).

Well my brain power tank just emptied so I am just gonna post this... feel free to message me in the comments or privately with any ideas.
PEACE OUT... (collapses from exhaustion)

Some quick paint jobs! Still need to paint the extension and my pin on the lancer. But those are easy.