Baldylox Designs

Coming real soon to the Etsy shop.

Detail parts to enhance your products from DigCom Designs www.digcomdesigns.net Thanks to Carlos for continuing to work with me to outfit hiss amazing printed items!!

Shown here:
3 styles of dual wheels
Up/down Landing Gear
Long/Short Mudflaps
2 styles of single axles
2 styles of dual axles

Kits will be up next week and will outfit 3-4 items per purchase.

Image sent in from customer Hunter Fergen

Small Tactor and Extended Drills.

Nice job! I've added these to the ETSY page images. :D

UPP 3008 is going up this week in 3 versions. Decals still need some work, missing data on the ends of the tanks. Might have to "make it work" on my end. Internet photos are crappy.

These images show gen1 tanks, this will ship with updated gen2 tanks that I've reworked with open drain holes, plus plugs for the holes.

1015 couplers, 1037? trucks, 9-10 cannons to cover the 8 needed as they are very delicate.

Brake wheel is printing successfully :D Chain Tie down and grating on walkway are visible and some of the basic/standard under body details printed too.

Decal Progress on UPP3008 :D

More research done on UPP3008 lead me to UP 903008 which led me back to the original car details. thanks to Utahrails :D

I found out this was a F-100-12 flat and thus was able to look in my data book and see that it had some tie downs imbeded. the data on Utahrails mentioned it had some "rails" installed to haul a steam engine to/from Sacramento at one time for display.

I've added those and pins for containers. If the containers are installed, then the pins can be shaved off as they are not universal lol

I will be test printing this week.

NOTE - the images of the Bulktainers online are old and crappy. If anyone has done research and knows the UPTU numbers on the 3, please share. OR if you have and can take pics of the old kits in N/HO that supplied decals. that too would be helpful.

cheers

Small fixes. Getting closer for track tests

Updates

UPP3008
I reached out to JTC today to see if they are working on a Bulktainer. If not, I'll probably finish them off.

For the "Shiloh", not sure about the decals. the signage is not great on the net and recreating it will be a chore. I'll likely simplify the banner to not include the items in the background. I'll likely print cannons x10 as they will be delicate.

STSF SH
Print 1 was ok, made changes today and starting it again.

When you see something like this posted, usually means good things. :D

ETSY Site Updates!!

I've turned on some auto sales events for the remainder of the year so mark your calendars!
Labor Day Aug21-Sep2 there is site wide 25% off sale on orders over 100$
Cyber Week Nov18-Dec3 there is a site wide 25% off sale on orders over 100$

Also the site is testing a change to Abandoned Carts. I beleive this is rather significant as it was or is 60days currently.
"New: Shorter expiration dates for abandoned cart offers
Buyers will now have 3 days to use their abandoned cart offer."

If you notice this change, please let me know in your order comments or on this post. I know many of you use that to take advantage of the built in discount Etsy offers.


Also update your bookmarks and share links to use this address.

BaldyloxDesigns - Etsy Shop Baldylox Designs - N Scale 3D Prints by BaldyloxDesigns located in Dundas, Minnesota. Smooth shipping! Has a history of shipping on time with tracking. Speedy replies! Has a history of replying to messages quickly. Rave reviews! Average review rating is 4.8 or higher

PSA!! Shapeways updates for a few gents I was following

Madaboutcars...here is his website. Id watch there to see whats to come.
http://www.jahn3d.de/

NGineer has updated and posted some new pages to visit.
https://www.shapeways.com/shops/ngineer

Website Updates

1. Olympic Cars have been moved to UPP Section
2. New Section - Transport has been added
3. The new 3 new trailers and mobile camper are up and posted in Transport.

www.etsy.com

Oh my, I made it past the cutting room floor! Lolol

The Toyman E24 coverage

World's Largest N Scale Modular Meet! FreemoN Evanston 2024! The WORLD'S LARGEST N scale meet, Evanston WY N-Scale Operations Meet 2024. 60 Miles of track in FreemoN, N Track modules, T Track modules, and Union Pacific...

Update!

The much anticipated, bane of my design existence (currrently, not all time lol ) has reached the final detail phase and will be printing production tests this week. pretty nervous. pushed some detail boundries and trying a new setup for my articulation style.

send good vibes! lol

Trailers 3 and 4

small 20' trailer & a 5th Wheel Camper

Trailer:
1. 2 sizes of toolboxes
2. Separate Axles/Wheels

Camper:
1. Hollow for interior painting and placing some peeps
2. Separate Ladder - if it prints well. its tiny. id use brass
3. Separate Awning - ditto, use a few styrene bars and tube
4. Separate Wheels/Axles w/ interior slots for glueing.
5. Separate AC units

Something is happening for those who are SW only shop.

3D-printdienst Shapeways uit Eindhoven maakt doorstart Hoe de Nederlandse 3D-printdienst doorgaat met afgeslankte activiteiten onder lokaal management.

#2 Trailer - 3-4 Gooseneck Car Hauler

Features all separate parts for max configuration options
1. 4-6 fender wells
2. 2-3 Wheel Sets
3. External Alum Ramps
4. 2 tool boxes
5. Spare Tire mount and wheel/tire

EXOTIC CARS & Truck NOT included! lolol

Here is the first of 3-4 moves off of Shapeways in the Transport/Trailer system.

38' Gooseneck Work Trailer - will go up later this week after test prints.

Trailer will come wiht 4 sets of wheel/axles, 2 toolboxes, 4 ramps, and 1 tailer. Option for Up/Down of the Landing Gear.

This was designed with my Bobcats and Mini Excavators in mind for hauling around. If you have the lawn mowing gear from Cults...that would look good too :D

/cheers

Took a while, but ive edited the "road trip" part of my journey to E24. have a look :D

www.facebook.com

Since I forgot to take photos lol

Ive been on the hunt for many years to find some decent looking chain link for N scale. its nearly impossible to get scale chain.

My latest purchase and test is from this site and product SM-7003
check it out. whatcha think?
https://floatingdrydock.com/more.htm

Wheres ’baldy’? For next 6:30hrs (until I get home) I’ll share the E24 discount for those whom did not get to attend.

Don’t post here!! send me a DM

Drone photo by Jim Lynch.

Aerial/Scissor lift shots of the FreemoN layout at E24

Took a ride on the round table and wanted to control it lol

Trip day 8 E24 day 5? lol. Final day. Tear down in a few hours.

Amazing event.