GFG Pty Ltd - South Africa

- PRODUCT FEATURE -

To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments.

Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.

GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time.

Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments.

Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.

The small and light Single-Gas Detectors belong to the personal safety equipment and can be carried directly at the user's clothing without handicap.

GfG Instrumentation presents the Micro IV full featured single-gas detector.

Lightweight (2-4 ounces), up to six months of battery life from a single off the shelf AA alkaline battery and a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and it has so much capability packed into it.

The Micro IV has a large backlit graphic display with real-time readout, programmable ceiling (3), STEL and TWA alarms.

The Micro IV offers a highly configurable smart sensor design and a wide range of sensors including O2, H2S, CO, NH3, SO2, CL2, CLO2, PH3, NO2, HCN, HCI, ETO, HF, O3, NO, H2, THT and more!

Most day-to-day functions are controlled with a single button, and calibration is fully automatic. The optional slide-on motorized pump allows sampling from a remote location. Event datalogging is standard, and with the optional docking station, bump test and calibration are simple and all maintenance records are stored automatically.

For more information get in touch at [email protected]

- PRODUCT FEATURE –

A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety.
Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.

A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 16-channels for 1 controller – or with a rack mounted system as many transmitters as are required.

CI21 – Transmitter for Ammonia Detection

The charge carrier injection (CI 21) sensor is a progressive development to improve upon current ammonia refrigeration detection methods.

With CI 21 technology sensor life is no longer limited to ammonia exposure levels. This reduces replacement costs associated with electrochemical sensors.

Metal Oxide Sensing (MOS) transmitters can be sensitive to cross interferences with alcohol, cleaning detergents, water, carbon monoxide, and many other substances. This leads to interfering alarms which become a nuisance that can lead to work stoppage and expensive shut downs. Charge carrier injection technology eliminates these false alarms, saving time and money.

Fluctuating humidity levels are also not an issue for the transmitter, and while MOS sensors require a minimum humidity level in order to respond to ammonia leaks, the CI 21 does not. The CI 21 is able to be directly calibrated with ammonia test gas at low humidity.

Utilizing a controlled sensor voltage, the CI 21 maintains a constant internal temperature, allowing accurate readings without additional heating components.

These, along with other features, provide reliable, cost effective, long-term safety. The CI 21 transmitter is an advanced development to which all other ammonia transmitters will be compared.

For more information e-mail us at [email protected].

-PRODUCT FEATURE-

Microtector III G888
4-Gas-detection device with optional wireless module

The Microtector III G888 is the smallest and lightest four-gas-detector with a wireless module in the world. Depending on which sensors it is equipped with, this gas detector warns users of hazards due to toxic, flammable gases and vapors, as well as against a lack of oxygen or excess oxygen. Due to individual sensor combinations and a wide range of accessories, the Microtector III G888 is suitable for every set of requirements.

A special highlight of the Microtector III G888 is its ability to transmit the current measurement data wirelessly to a nearby control center. This means the head of operations always has precise information about the current hazards to which his or her employees are exposed.

The Microtector III G888 has just three buttons for an easy operation. The device is ready for operation after pressing just one button. Two more buttons and a clearly structured menu guarantee intuitive handling.

You can use a combination of precalibrated, plug-in sensors. The electrochemical sensors are detected automatically, and all parameters, properties, and gas-specific limit values are applied. The sensors are characterized by a long service life, high measuring accuracy, quick response, and low cross-sensitivities.

Three alarm limit values for flammable gases and oxygen as well as two current limit values for toxic gases provide full protection for the user. In addition to the Occupational Exposure Limit value (OEL), the Long- Term Average value (LTA) and Short-Term Average value (STA) are also monitored automatically, and their average values are stored. All limit values are protected by a code that you can specify individually.

The integrated data logger records the measured gas concentrations and activates alarms over a period of up to 500 hours. The data stored can be read out and documented using the TS400 test station or the DS400 docking station.

The Microtector III G888 unites technical innovation with attractive design. Independent committees of experts confirm the outstanding performance in terms of design and functionality, while highlighting its compact size and exceptionally low weight in particular.

For more information on this product contact GFG at [email protected].

FREE Webinar 4/20 @ 1pm EST - "Gas Detection Solutions for the Cannabis Industry"

Registration Link Below.

In this webinar we will examine gas detection issues and answers for the licensed cannabis industry from the standpoint of growers, extractors, inspectors and emergency responders. Cannabis “grow operations” involve use of carbon dioxide that can displace oxygen, while “extraction” operations use gases like propane and butane, as well as methanol, ethanol and other solvents. Odor control and measurement is often an additional concern. Regulations require use of fixed gas detection systems to guard against hazardous explosive, toxic and oxygen deficient conditions in greenhouses as well as extraction rooms. Inspectors who periodically enter facilities as part of the licensing process, and emergency responders entering a facility after an accident are potentially at risk from these same hazards. Understanding, choosing and using the correct portable instruments is vital to their safety as well.

Brought to you by GfG Instrumentation in cooperation with Safeopedia.

https://register.safeopedia.com/gas-detection-solutions-for-the-cannabis-industry?utm_source=GfG

In the latest edition of the GfG GAZETTE we inform you about portable gas detection devices and our modern protection concept "Connected Safety". Simply register here to receive our newsletter automatically : https://lnkd.in/efkRJ9f

- Transmitter IR29 - Innovative transmitter for combustible gases-

GfG Instrumentation’s innovative IR 29 Transmitter for combustible gases is the first intrinsically safe infrared (IR) transmitter for Zone 0.

There are two models; the IR 29i which is intrinsically safe for hydrocarbons (LEL) and the IR 29Di which also has the graphical display.

IR transmitters have become recognized as reliable gas warning systems for explosion protection. They are used to detect individual combustible gases or a wide range of gases. A special feature of the IR 29 technology is its ability to also measure combustible gases above the lower explosion limit. Moreover, the measurement does not require oxygen. With this technology there is basically no risk of contaminating the sensor.

The IR 29 is the first and only intrinsically safe IR gas transmitter with patented 4-beam 4-wavelength technology. The ignition protection class “intrinsically safe”, which is so essential for industrial plants and the mining industry, is achieved by the additional use of the SB1 safety barrier and its internationally patented and innovative design.

The IR 29 is the first IR gas transmitter that can also be used in Ex zone 0 and which enables maintenance as well as replacement of the sensor head without additional expense when energized.

A standard built-in data logger records all the measuring data, minimum / maximum values, average values and alarm events of the last 24 hours in a ring buffer. Measured values are shown on the high-contrast graphical display. Local displays and signals directly at the device can be used to provide an early warning of potential risks. The display at the upstream safety barrier SB1 D enables the detection of risks outside the danger zone being monitored. This allows immediate on-site action before really hazardous situations occur.

MAIN FEATURES INCLUDE :

▪ First intrinsically safe IR transmitter for explosion protection
▪ Temperature, moisture and pressure compensation
▪ Patented IR technology (NDIR)
▪ The energised IR sensor head can be replaced in Ex areas
▪ Maintenance and service-friendly
For more information e-mail us at [email protected] or visit our website at www.gfg.biz.

- PRODUCT FEATURE -

To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments. We also offer a range of accessories that complement and enhance the functionality of our portable gas detectors.

TS400 – TEST STATION FOR G450/G460

The TS400 Test Station for the G450 and G460 makes daily bump testing simple. It automatically performs a full functional test that includes bump test, extensive sensor tests and alarm tests. After testing, you can quickly print official maintenance certificates.

The TS400 is available (optionally) for use as a charger as well as a test station. After all tests have been completed you may leave the detector in the TS400 for recharging.

The test station can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!
The TS400 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

For more information e-mail us at [email protected] or visit our website at www.gfg.biz.

- PRODUCT FEATURE –

A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety.
Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.

A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 16-channels for 1 controller – or with a rack mounted system as many transmitters as are required.

CC22 – TRANSMITTER FOR COMBUSTIBLE GASES

The CC22 works according to the heat of reaction principle, a proven method for measuring combustible gases.

The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow-up costs are minimized thanks to the long lifespan of the sensors.

The embedded software of the CC22 linearizes the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature.

The CC22 is available with a display or without display.
The clear graphic display of the CC22 is self explanatory and allows you to read off the current status and other important information with ease. The display enables you to navigate effortlessly through the unit’s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm, the display will turn red.

For more information e-mail us at [email protected] or visit our website at www.gfg.biz.

With the IR29 (up to Ex zone 1) and the IR29i (up to Ex zone 0) GfG offers stationary transmitters for monitoring flammable gases and CO2 in hazardous areas.

For more information get in touch at [email protected] or 011 955 4862.

- PRODUCT FEATURE -

To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments.

Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.

GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time.

Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments.

Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.

- Microtector II G450 -

The 4-gas detector Microtector II G450 has been specifically developed for meeting the requirements of daily work. It reliably detects and warns of gas hazards of O2, H2S, CO and of all combustible gases, is part of the personal protection equipment and can be carried directly on the protective clothing without hindering efficient work. The robust and durable GfG high performance sensors are able to measure the smallest gas concentration and thus to monitor the lowest occupational exposure limit value.

The innovative multi-gas detector G450 passes the performance test and is certified according to EN 60079-29-1 (explosive gases), EN 50104 (oxygen) and EN 45544 (toxic gases).

For more information visit www.gfg.biz or get in touch at [email protected]

- PRODUCT FEATURE -

A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety.
Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.

A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 16-channels for 1 controller – or with a rack mounted system as many transmitters as are required.

* EC 22 Fixed Gas Transmitter *

The EC 22 Series Transmitters are innovative and cost-effective transmitters for the detection of non-combustible toxic gases or oxygen (O2) levels, but without the need for explosion protection.

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

The embedded software of the EC 22 compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature.

MAIN FEATURES INCLUDE :

- Long service life of the sensors
- High efficiency and low follow-up costs
- Sturdy plastic housing (IP-54)
- Cost effective single-man adjustment
- Affordable solution for many measuring tasks

For more information contact us at [email protected] or visit our website at www.gfg.biz

- PRODUCT FEATURE -

To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments.

Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.

GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time.

Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments.

Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.

The small and light Single-Gas Detectors belong to the personal safety equipment and can be carried directly at the user's clothing without handicap.

GfG Instrumentation presents the Micro IV full featured single-gas detector. Lightweight (2-4 ounces), up to six months of battery life from a single off the shelf AA alkaline battery and a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and it has so much capability packed into it. The Micro IV has a large backlit graphic display with real-time readout, programmable ceiling (3), STEL and TWA alarms.

The Micro IV offers a highly configurable smart sensor design and a wide range of sensors including O2, H2S, CO, NH3, SO2, CL2, CLO2, PH3, NO2, HCN, HCI, ETO, HF, O3, NO, H2, THT and more!

Most day-to-day functions are controlled with a single button, and calibration is fully automatic. The optional slide-on motorized pump allows sampling from a remote location. Event datalogging is standard, and with the optional docking station, bump test and calibration are simple and all maintenance records are stored automatically.

For more information visit www.gfg.biz or get in touch at [email protected]

A gas leak in a heating system can have serious consequences. Gas detection solutions should therefore also be considered for small systems. If you want to learn more about this topic, don't miss our newsletter, which will be published a week from today.

Follow this link to sign up and make sure you stay informed:
https://lnkd.in/efkRJ9f

- Transmitter IR29 - Innovative transmitter for combustible gases-

GfG Instrumentation’s innovative IR 29 Transmitter for combustible gases is the first intrinsically safe infrared (IR) transmitter for Zone 0.

There are two models; the IR 29i which is intrinsically safe for hydrocarbons (LEL) and the IR 29Di which also has the graphical display.

IR transmitters have become recognized as reliable gas warning systems for explosion protection. They are used to detect individual combustible gases or a wide range of gases. A special feature of the IR 29 technology is its ability to also measure combustible gases above the lower explosion limit. Moreover, the measurement does not require oxygen. With this technology there is basically no risk of contaminating the sensor.

The IR 29 is the first and only intrinsically safe IR gas transmitter with patented 4-beam 4-wavelength technology. The ignition protection class “intrinsically safe”, which is so essential for industrial plants and the mining industry, is achieved by the additional use of the SB1 safety barrier and its internationally patented and innovative design.

The IR 29 is the first IR gas transmitter that can also be used in Ex zone 0 and which enables maintenance as well as replacement of the sensor head without additional expense when energized.

A standard built-in data logger records all the measuring data, minimum / maximum values, average values and alarm events of the last 24 hours in a ring buffer. Measured values are shown on the high-contrast graphical display. Local displays and signals directly at the device can be used to provide an early warning of potential risks. The display at the upstream safety barrier SB1 D enables the detection of risks outside the danger zone being monitored. This allows immediate on-site action before really hazardous situations occur.

MAIN FEATURES INCLUDE :

▪ First intrinsically safe IR transmitter for explosion protection
▪ Temperature, moisture and pressure compensation
▪ Patented IR technology (NDIR)
▪ The energised IR sensor head can be replaced in Ex areas
▪ Maintenance and service-friendly

For more information e-mail us at [email protected] or visit our website at www.gfg.biz.

https://www.linkedin.com/feed/update/urn:li:activity:6738781944441524224

GfG(Pty)Ltd on LinkedIn: VIDEO VAULT | One of America's largest chlorine gas leak hits Las A look into the past can help to better assess current risks. About 30 years ago, one of the largest chlorine gas leaks occurred in North America. Tom ...

- PRODUCT FEATURE -

To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments.

Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.
GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time.

Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments.

Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.
The small and light Single-Gas Detectors belong to the personal safety equipment and can be carried directly at the user's clothing without handicap.

GfG Instrumentation presents the Micro IV full featured single-gas detector. Lightweight (2-4 ounces), up to six months of battery life from a single off the shelf AA alkaline battery and a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and it has so much capability packed into it. The Micro IV has a large backlit graphic display with real-time readout, programmable ceiling (3), STEL and TWA alarms.

The Micro IV offers a highly configurable smart sensor design and a wide range of sensors including O2, H2S, CO, NH3, SO2, CL2, CLO2, PH3, NO2, HCN, HCI, ETO, HF, O3, NO, H2, THT and more!

Most day-to-day functions are controlled with a single button, and calibration is fully automatic. The optional slide-on motorized pump allows sampling from a remote location. Event datalogging is standard, and with the optional docking station, bump test and calibration are simple and all maintenance records are stored automatically.

For more information visit www.gfg.biz or get in touch at [email protected]

-PRODUCT FEATURE-

Microtector III G888
4-Gas-detection device with optional wireless module

The Microtector III G888 is the smallest and lightest four-gas-detector with a wireless module in the world. Depending on which sensors it is equipped with, this gas detector warns users of hazards due to toxic, flammable gases and vapors, as well as against a lack of oxygen or excess oxygen. Due to individual sensor combinations and a wide range of accessories, the Microtector III G888 is suitable for every set of requirements.

A special highlight of the Microtector III G888 is its ability to transmit the current measurement data wirelessly to a nearby control center. This means the head of operations always has precise information about the current hazards to which his or her employees are exposed.

The Microtector III G888 has just three buttons for an easy operation. The device is ready for operation after pressing just one button. Two more buttons and a clearly structured menu guarantee intuitive handling.

You can use a combination of precalibrated, plug-in sensors. The electrochemical sensors are detected automatically, and all parameters, properties, and gas-specific limit values are applied. The sensors are characterized by a long service life, high measuring accuracy, quick response, and low cross-sensitivities.

Three alarm limit values for flammable gases and oxygen as well as two current limit values for toxic gases provide full protection for the user. In addition to the Occupational Exposure Limit value (OEL), the Long- Term Average value (LTA) and Short-Term Average value (STA) are also monitored automatically, and their average values are stored. All limit values are protected by a code that you can specify individually.

The integrated data logger records the measured gas concentrations and activates alarms over a period of up to 500 hours. The data stored can be read out and documented using the TS400 test station or the DS400 docking station.

The Microtector III G888 unites technical innovation with attractive design. Independent committees of experts confirm the outstanding performance in terms of design and functionality, while highlighting its compact size and exceptionally low weight in particular.

For more information on this product contact GFG at [email protected]

- PRODUCT FEATURE –

A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety.
Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.

A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 16-channels for 1 controller – or with a rack mounted system as many transmitters as are required.

IR22 – Transmitter for Carbon Dioxide & Combustible Gases

The IR 22 transmitter combines the proven infrared
measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmitter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearizes the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

The transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, “Zero button” to adjust the zero point, and a test socket and potentiometer for the sensor calibration.
In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

For more information e-mail us at [email protected] or visit our website at www.gfg.biz.

- PRODUCT FEATURE –

A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety.

Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.

A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 16-channels for 1 controller – or with a rack mounted system as many transmitters as are required.

- Transmitter IR29 - Innovative transmitter for combustible gases-

GfG Instrumentation’s innovative IR 29 Transmitter for combustible gases is the first intrinsically safe infrared (IR) transmitter for Zone 0.

There are two models; the IR 29i which is intrinsically safe for hydrocarbons (LEL) and the IR 29Di which also has the graphical display.

IR transmitters have become recognized as reliable gas warning systems for explosion protection. They are used to detect individual combustible gases or a wide range of gases. A special feature of the IR 29 technology is its ability to also measure combustible gases above the lower explosion limit. Moreover, the measurement does not require oxygen. With this technology there is basically no risk of contaminating the sensor.

The IR 29 is the first and only intrinsically safe IR gas transmitter with patented 4-beam 4-wavelength technology. The ignition protection class “intrinsically safe”, which is so essential for industrial plants and the mining industry, is achieved by the additional use of the SB1 safety barrier and its internationally patented and innovative design.

The IR 29 is the first IR gas transmitter that can also be used in Ex zone 0 and which enables maintenance as well as replacement of the sensor head without additional expense when energized.

A standard built-in data logger records all the measuring data, minimum / maximum values, average values and alarm events of the last 24 hours in a ring buffer. Measured values are shown on the high-contrast graphical display. Local displays and signals directly at the device can be used to provide an early warning of potential risks. The display at the upstream safety barrier SB1 D enables the detection of risks outside the danger zone being monitored. This allows immediate on-site action before really hazardous situations occur.

MAIN FEATURES INCLUDE :
▪ First intrinsically safe IR transmitter for explosion protection
▪ Temperature, moisture and pressure compensation
▪ Patented IR technology (NDIR)
▪ The energised IR sensor head can be replaced in Ex areas
▪ Maintenance and service-friendly

For more information e-mail us at [email protected] or visit our website at www.gfg.biz.