Powr69

Manufacture and distribution of a handheld energy-harvesting infinite solid-state USB power supply d

30/01/2024

Where can I find investors to help me build a prototype of an asynchronous power generator that that can charge all USB devices?
This generator does not require external power to operate, power is internally 'recycled' and onboard, built-in power sources are always fully charged

02/09/2022

investors needed

01/09/2022

funding and investors needed. Partners welcome

21/06/2022

How long would it take to charge this 5.5v 0.33F supercapacitor from 4.7v to 5v at 100mA (0.1A)?
I know the equation is
i=C*dv/dt
but I still have to learn calculus

Elektro-meganiese opwekker toets 21/02/2022

Voorlopige toets vir die opwekker.
Die draadjies is nie vas gesoldeer nie want my soldeer boud, Chinese fong-kong, het geblaas. Ten minste weet ek nou dat ek nog baie werk het

Elektro-meganiese opwekker toets Toets opstel van beplande elektro-meganiese opwekker wat krag vir 5 volt USB toestelle kan verskaf

08/05/2021

Electronic circuit components provide resistance to electricity through heat dissipation but provide us with hours of joy and entertainment

Photos from Powr69's post 07/05/2021

a few ideas for promotional posters

Found this on Pinterest 07/05/2021

an Idea for a promotional poster i'm working on

Found this on Pinterest Discover even more ideas for you

03/08/2020

Introduction
Lithium may be the best option for powering usb devices due to its high energy density but is far from save, they can explode if not constructed correctly and need a protection circuit to control and prevent under- and overcharging. Research is ongoing to find an alternative to lithium and although large companies keep their findings secret, one can still find a lot of information on the internet and youTube as entrepreneurs freely share their research.
Graphite paper batteries can be used as an alternative to lithium that has a greater charge/discharge rate and limit. These batteries are completely environmentally friendly, bio-degradable, non-hazardous and easy to manufacture. Electrodes can be made with graphite paint from Bare conductive with copper and zinc in the anode and cathode respectively as current collectors and a electrolyte of sodium chloride mixed with a polymer or any other variant.
The idea
I suggest the manufacture and distribution of a power supply unit with an internal graphite paper battery that is maintained and controlled by a microcontroller monitoring system that ensures it is always fully charged and has sufficient energy to constantly power any usb device connected to it.
The capability to charge and discharge safely at a fast rate makes it ideal as a power storage for this 'self-charging power bank' and displays characteristics of a hybrid battery/capacitor. A buck-boost r4converter will be incorporated if the current needs to be improved.
Fundraiser on thundafund.com
My idea is to launch a fundraiser campaign in October or November on thundafund.com to raise a total amount of R125 000 to start my company, giving me about two or three months to get ready. I’ll need a few things before I do.
Thundafund is a crowdfunding platform where fundraiser offer rewards for donations and I have chosen chocolate bars, thermal mugs, t-shirts and keyrings all with the company logo and name printed on them and self-designed posters of the founders of electricity and electromagnetism as rewards and are some of the items I plan to sell in the shop.
All the rewards and designs needs to be in place before the fundraiser. The funds will be used for further research and to setup a shop/factory to start production.
Funding required
I’ll need R7500 to purchase some of the items for the fundraiser that will be offered as rewards and to have them printed for display on thundafund, to build a prototype and to purchase a secondhand laptop to design the logos, banners and posters. Also I’ll need to advertise on social platforms such as Facebook.
Repayment
I offer 12.5 % interest and would prefer to repay immediately after the fundraiser.
About my project
I had this idea of building a self-sufficient power generator/supply for the last 5 years and only last year discovered graphite paper batteries. Before that I wanted to use two capacitors, one charging while the other one discharges which is controlled by a flip-flop or a microcontroller and a transformer to cycle the power back as a continuous loop. But I learned valuable information and knowledge through all this. New technology and revolutions in so many fields of modern life.
Future plans
For now the prototype will use a opAmp to control the voltage of the internal battery but a ATtiny 13 AVR that has 1K of flash memory will be used and programmed in assembly for the commercial unit, that will make it more efficient. This microcontroller can also send charge cycles to a mobile app as part of a reward system where the user actually test the unit and the activities are logged on a server.
Also I plan to build a compact robotic machine that will be able to manufacture a charger unit from PCB preparation to the boxing. This machine will be powered by a raspberry pi 4 and programmed with Python. A distributor will be used to allow 128 motors and sensors.

29/07/2020

Funding required to start project

29/07/2020

Lithium may be the best option for powering usb devices due to its high energy density but is far from save, can explode if not constructed correctly and need a protection circuit to control and prevent under- and overcharging.
Graphite paper batteries, on the other hand, can be used as an alternative to lithium that has a greater charge/discharge rate and limit. These batteries are completely environmentally friendly, bio-degradable, non-hazardous and easy to manufacture.
I suggest the manufacture and distribution of a power supply unit with an internal graphite paper battery that is maintained by a monitoring system that ensures it is always fully charged and has sufficient energy to constantly power any usb device connected to it. The capability to charge and discharge safely at a fast rate makes it ideal as a power storage for this 'self-charging power bank' and displays characteristics of a hybrid battery/capacitor.
My idea is to launch a fundraiser campaign in October or November on thundafund.com to raise R125 000. Thundafund is a crowdfunding platform where fundraiser offer rewards for donations and I have chosen chocolate bars, thermal mugs, t-shirts and keyrings all with the company logo and name printed on them and self-designed posters of the founders of electricity and electromagnetism as rewards.
I’ll need R7500 to purchase some of the items, to have them printed for display on thundafund, to build a prototype and to purchase a second-hand laptop to design the logos, banners and posters. Also I’ll need to advertise on social platforms such as Facebook.
I offer 12.5 % interest and would prefer to repay immediately after the fundraiser.
Please contact me at 062 145 2646

Photos from Powr69's post 22/07/2020
22/07/2020

Design concept sketches

Timeline photos 19/07/2020
Want your business to be the top-listed Computer & Electronics Service in Pretoria?
Click here to claim your Sponsored Listing.

Category

Address

Pretoria
0002

Other Electronics in Pretoria (show all)
Isotunesza Isotunesza
48 HELEN JOSEPH
Pretoria, 0001

Official distributors of ISOtunes in South Africa. Our sole goal is to provide hearing protection people actually want to wear. ISOtunes Sport is designed specifically for modern-d...

TRX Electronics TRX Electronics
697 Jacques Street
Pretoria

TRX Electronics is an independently-owned distributor of quality electronic components in South Africa. We have access to over 2.5 million lines through our major partners TTI I...

Proano led,LCD,plasma TV repairs Proano led,LCD,plasma TV repairs
569 Lilian Ngoyi &scheding
Pretoria

LED,LCD , plasma TV repairs around pretoria

Alphatech Evolution Alphatech Evolution
Pretoria

We are a dynamic team bringing you the best technology on the market at the best prices. We can assist with all computer related products as well as gaming, software, hardware and ...

Mandla electronics DSTV Mandla electronics DSTV
Mandla Electronics DSTV Stay In Soshanguve
Pretoria

Free installation R650

Lindoni electronic FBI repair TV and amplifier Lindoni electronic FBI repair TV and amplifier
Solomon Mahlangu
Pretoria, HOMESERVICES

Repair all types of TVS amplifier recoil speaker fit car sounds stoves grill

Nizam.co.za Nizam.co.za
Pretoria

Smerno Smerno
Menlyn Park Shopping Centre
Pretoria, 0063

Gate Boss Rudolf Gate Boss Rudolf
Pretoria
Pretoria

Gate motor specialist

Count Me In Essentials Count Me In Essentials
378 Festival Street, Hatfield
Pretoria, 0028

E-Commerce

Ross Custom Accessories Ross Custom Accessories
Pretoria, 0182

Introducing our Plug & Play 12 Volt Power Distribution Panel.

Galak Tech Galak Tech
68 Myburgh Street
Pretoria, 0084

We offer solution to Desktops and Laptops software,We do website design, IT support and sell software